- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSCR10020241)
£37.18100mm Swivel Castor (Pressed Steel) and Crown Trea... Read Mored Polyurethane Tyred Wheel with Ball Bearing. Load Capacity = 250kg -
In Stock63mm Black Footmaster Levelling Castor, Stem Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80SBLACK)
£48.0963mm Footmaster Levelling Castor with an M12 x 18m... Read Morem Threaded Stem finished in Finished with a Black powder coating. This product has a black Nylon Wheel with a 28mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation. This product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load (GD-80-S-NYN-BLK) Because of the lifting and lowering function of the Footmaster Levelling castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (822PNB)
£59.07200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 500kg -
In Stock150mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG150PCB)
£59.95150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a Polyurethane Tyre wheel with a Cast Iron Centre and Ball Bearings. Load Capacity = 500kg using manual propulsion at 4 km/h. Key Specifications:- Top Plate Size: 140mm x 110mm
- Bolt Hole Centres: Slotted to 114x87mm / 97.5x71.5mm
- Overall Height: 190mm
- Tread Width: 45mm
-
In Stock100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK100PC2B)
£33.40100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 300kg -
In Stock125mm Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSV125PN1B)
£15.31125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg -
In StockSwivel Castor, 1000kg Capacity | 150mm Polyurethane Tyre Wheel, Ball bearing, (K2ST150PC2B)
£301.24150mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor. The swivel head turns on thrust and taper roller bearings for extra strength and the bracket is finished in black epoxy paint.
This castor has a top plate measuring 170mm x 170mm with bolt hole spacings of 130mm x 130mm drilled to 13mm diameter. The two Polyurethane Tyre on a Cast Iron Centre wheels each have ball bearings fitted to reduce the rolling resistance.
The castor has a 1000kg Load Rating at 4km/h
-
In Stock100mm Shock Absorbing Swivel Castor, 100kg Capacity | Polyurethane Tyre Wheel (GDSB100ASFLUD75)
£85.84... Read More-variant-east-asian: normal; font-size: 14px;">100mm Shock Absorbing Swivel Castor, Polyurethane tyre wheel with an Aluminium Centre and precision ball bearings, The polyurethane tyre has a shore hardness of A90 and the Load Capacity of the castor is 100kg.
The Overall height without a load is 171mm and this reduces incrementally by up to 20mm as load increases (see image 2 - GDS100 Curve). It is fully compressed with a load of 75kg.
-
Out of Stock - On the Way40mm Swivel Castor, 15kg Capacity | Polypropylene Wheel, Plain Bore (1002005)
£2.3840mm Top Plate Swivel Castor (Pressed Steel) with ... Read More38x38mm Bolt Hole Centres. Polypropylene Wheel with Plain Bore. Load Capacity = 15kg -
In Stock100mm Swivel Castor, 225kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TS4100PT14)
£40.84100mm Top Plate Swivel Castor (Pressed Steel). Wit... Read Moreh a top plate of 135x110mm and 105x80mm bolt hole centres, this castor has a larger top plate than most 100mm castors. The wheel is a Revvo 100PT14 which is a Polyurethane Tyre on a Cast Iron Wheel complete with Needle Roller Bearing. Load Capacity = 225Kg -
In Stock160mm Swivel Castor, 500kg Capacity | Nylon Wheel, Ball Bearing (KS160NYBJ500)
£60.01160mm Swivel Castor (Heavy Duty Pressed Steel) wit... Read Moreh a 135mm x 110mm Top Plate with 105x80mm Fixing Hole spacings. The castor wheel is a Solid White Nylon Castor Wheel with two ball bearings. Load Capacity = 500kg -
In Stock250mm Swivel Castor, 2950kg Capacity | Polyurethane Tyre Wheel, Taper Roller (EH210SUTM)
£1,099.54Extra Heavy Duty Swivel Castor with 250mm Polyuret... Read Morehane Tyre Cast Iron wheel on taper roller bearings. The swivel head contains double taper roller bearings which means it is suited to very heavy applications and with a grease nipple in the swivel head enables re-greasing. The bracket is fabricated forge steel and coated with a black electrostatic finish. The load capacity of this castor is 2,950kg and is suitable for power towing, The castor has an overall height of 368mm and the top plate measures 178mm x 153mm with bolt hole centres of 127mm x 102mm that are suitable for 16mm bolts, This swivel radius of the castor is 197mm. This measure is the radius of the circle the outer dimension of the wheel would make when swivelling in a stationary position. -
In Stock80mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS080NYBH)
£17.4780mm Bolt Hole Swivel Castor (Stainless Steel Cast... Read Moreor) with 12mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg -
In Stock100mm Swivel Castor, 75kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV100GRP1B)
£6.66100mm Grey Rubber Tyre wheel on a plastic centr... Read Moree with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 75kg using manual propulsion at 4km/h (walking speed)
The Grey Rubber Tyre is a softer wheel compared to hard tread wheels like nylon and the rubber absorbs vibrations whilst in motion making this a low noise option and will not mark or scratch the floor. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castor a great choice for many industrial or domestic applications.
-
In Stock50mm Swivel Castor, 27kg Capacity | Rubber Tyre Wheel, Plain Bore (961RN)
£5.2850mm Top Plate Swivel Castor (Pressed Steel) with ... Read More54x25mm Fixing Bolt Hole Centres and 64mm Overall Height. The wheel is a Blue Rubber Tyre on a Black Nylon Centre Wheel with a Smooth Plain Bore and a 22mm Tread Width. Load Capacity = 27kg. The blue rubber tyre wheel has a soft tread and is both gentle on floors and non-marking. It also absorbs fine vibrations whilst moving which provides user comfort and limits noise.
