- Sorry, this product cannot be purchased.
- Display 15 Products per page
-
In Stock200mm Fixed Castor, 250kg Capacity | Polypropylene Wheel, Plain Bore (LFV200PP)
£17.81200mm Top Plate Fixed Castor with a White Polyprop... Read Moreylene wheel. It has 105x80mm fixing bolt hole centres, 235mm overall height and the load capacity is 250kg using manual propulsion at 4km/h. This is one of our most popular castors and the White Polypropylene wheel is non-marking and won’t damage concrete floors. Because it is a hard tread it has the lowest rolling and swivelling resistance. It is ideal as a new component or a replacement caster for most general purpose domestic or industrial castor where the travel speed of the castor generally does not exceed walking speed. -
In StockCastor Wheel 125mm | Blue Rubber Tyre / Nylon Centre, 230kg, 12mm Roller Bearing (KUER1253612BLUE)
£11.16125mm Castor Wheel with a blue elastic rubber tyre... Read More on a black nylon centre and a 12mm Roller Bearing. This wheel has a 36mm tread width, 45mm Hub Length and a Load Capacity of 230kg using manual propulsion at 4km/h. It is industry standard to measure the treat width at the point where the tyre meets the nylon centre. This wheel tapers in and the tyre's contact area with the floor is 26mm.
The Blue Elastic Rubber offers a higher load capacity over standard grey or black rubber tyres and will not mark floors. Furthermore, it provides a cushioning effect that helps absorb rolling vibrations which makes it quieter and more comfortable for the user. -
In Stock100mm Fixed Castor, 250kg Capacity | Nylon Wheel, Plain Bore (429NY)
£11.12100mm Top Plate Fixed Castor (Pressed Steel) with ... Read More80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 250kg Nylon is a high quality, low maintenance, impact resistant wheel that has a high load capacity. The nylon material is extremely resistant to salts, greases, acids and alkalis and will not mark or damage concrete floors. This makes Nylon probably the most castor wheel material. -
In Stock200mm Fixed Castor, 1150kg Capacity | Cast Iron Wheel, Ball Bearing (TFH200CI2H)
£89.10200mm Heavy Duty Top Plate Fixed Castor (Fabricate... Read Mored Castor) and a high quality Cast Iron Wheel with Ball Bearings. Load Capacity = 1150kg The Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm.- Use 12mm diameter bolts when fitting at 120 x 60mm
- Use 10mm diameter bolts when fitting at 105x80/75mm
- The Genuine Revvo H Series castor is made from heavy gauge forged steel
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
-
In StockCrown Tread Castor Wheel 200mm | Polyurethane Tyre / Cast Iron Centre, 750kg, 20mm Ball bearing (CR20020241)
£62.20200mm Crown Tread Polyurethane / Cast Iron Wheel w... Read Moreith 20mm Ball Bearing. Load Capacity = 750kg -
In StockDesigner Polyurethane Tyre Wheel 125mm | Polyurethane Tyre / Cast Iron, 600kg, 25mm Ball Bearing (12545PT225)
£111.20125mm Polyurethane (Extra Heavy Duty) Tyred / C... Read Moreast Iron Centre Wheel with 25mm Ball Bearing. This is a high performance wheel using premium grade REVVOTHANE polyurethane which is a high quality tyre with a high load bearing capacity, minimal heat build up and a high abrasion resistance. This wheel is often used in conveyor and transportation systems.
The Load capacity quoted is for operation under ideal conditions where the wheel operates infrequently and on a smooth surface. The wheel's load capacity must be reduced as indicated for any of the following conditions. Please note that these are cumulative if more than one condition exists:
- Reduce load by 25% if continuous use for more than 45 minutes.
- Reduce Load by further 30% if used as Drive Wheel.
- Reduce load by further 30% if used at speeds greater than 6kp/h.
-
In Stock200mm Swivel Castor, 800kg Capacity, Nylon Wheel, Ball Bearing (KS200NYBJ800)
£81.48200mm Swivel Castor (Heavy Duty Pressed Steel) wit... Read Moreh a 135mm x 110mm Top Plate and 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon with two shielded ball bearings. Load Capacity = 800kg- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- Being a hard tread it offers the lowest rolling resistance and easiest mobility.
- This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors
- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
-
In StockTeflon Wheel Tube: 15mm OD x 8mm ID x 49mm Length (TEFLONTUBE49158MM)
£2.43Teflon wheel tube to reduce a 15mm bore to 8mm bor... Read Moree. This tube has a 15mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. -
In Stock50mm Swivel Castor with Brake, 50kg Capacity | Polypropylene Wheel, Plain Bore (LSM050PPBR)
£3.7750mm Swivel Castor With Total Stop Brake. 4 hole t... Read Moreop plate with 48/38x48/38mm slotted bolt hole centres to suit 6mm fixing bolts. The wheel is Black Polypropylene with Plain Bore. Load Capacity = 50kg -
In Stock125mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (522PNB)
£29.82125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 250kg -
In StockCastor Wheel, 150mm | Nylon, 520kg Capacity, 20mm Roller Bearing (WNY6RBM20)
£20.84150mm White Nylon Castor Wheel with 20mm Roller Be... Read Morearing. Load Capacity = 520kg Key Specifications:- Tread Width: 38mm
- Hub Length: 60mm
- Wheel Material: White Nylon
- Bearing Type: Roller bearing
- Bore: 20mm
-
In Stock160mm Swivel Castor with Brake, 500kg Capacity | Nylon Wheel, Ball Bearing (MSK160NY2BBR)
£35.23160mm Top Plate Swivel Castor with Brake (Pressed ... Read MoreSteel) with 105x80mm Fixing Bolt Hole Centres. White Nylon Wheel with Ball Bearings. Load Capacity = 500kg.
-
In Stock200mm Fixed Castor, 100kg Capacity | Puncture Proof Wheel, Roller Bearing (KF200EVA)
£23.65200mm Puncture Proof Fixed Castor (Pressed Steel B... Read Moreracket) with 137x115mm Top Plate dimensions and 105x80mm Fixing Bolt Hole. The wheel is a 200mm Rib Tread Puncture Proof Wheel on a black polypropylene centre with 50mm Tread with and a needle roller bearing. 100kg Load Capacity. The Caster wheel's tyre is made from microcellular polyurethane with a 65 Shore A hardness. -
Out of Stock - On the Way125mm Swivel and Brake Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1322108)
£16.30125mm Bolt Hole Swivel Castor and Swivel & Whe... Read Moreel brake (Pressed Steel) with 10mm Bolt Hole. Nylon Wheel with Ball Bearing. Load Capacity = 150kg -
In Stock125mm Swivel Castor with Brake, 200kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV125PN2BSWB)
£19.54125mm Top Plate Swivel Castor with Swivel & Wh... Read Moreeel Brake and with 80x60mm Bolt Hole Centres. Red Polyurethane Tyre on a Grey Nylon Centre Wheel with ball bearing. Load Capacity = 200kg
