- Sorry, this product cannot be purchased.
- Display 15 Products per page
-
In Stock
75mm Fixed Castor, 50kg Capacity | Rubber Tyre Wheel, Roller Bearing (LFV075RMB)
75mm Top Plate Fixed Castor with a Black Rubber Ty... Read Morere Wheel on a Pressed Steel centre complete with Thread Guards. It has 55x42mm bolt hole centres and the load capacity of this castor is 50kg using manual propulsion at 4km/h This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The wheel has a roller bearing that offers low rolling resistance to reduce the effort needed to push the castor. This castor is ideal for most general purpose domestic or industrial castor where the travel speed of the castor is low and generally should not exceed 4km/h (walking speed). -
In Stock
Castor Wheel 125mm | Cast Iron, 630kg, 15mm Plain Bore (WCI5M15)
125mm Cast Iron Wheel (Wheel - Hard Tread) with P... Read Morelain Bore. Load Capacity = 630kg -
In Stock
Castor Wheel 250mm | Polyurethane Tyre / Cast Iron Centre, 1200kg, 25mm Ball Bearing (25025241)
250mm Polyurethane Tyre on a Cast Iron Centre Cast... Read Moreor Wheel with 25mm Ball Bearings, 50mm Tread Width and 60mm Hub Length (the distance through the bore). Load Capacity = 1200kg The polyurethane used as the tyre is a high quality polyurethane that has a high tear strength, exceptional abrasion resistance and a useful life of up to 10 times that of equivalent rubber tyres under similar conditions and loads. -
In Stock
Swivel Castor (Twin Wheel), 200mm, 2000kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST200PC2B)
200mm Twin Wheel Extra Heavy Duty Fabricated Swive... Read Morel Castor. The Swivel Head Turns On Thrust and Taper Roller Bearings For Extra Strength and The Bracket Is Finished In Black Epoxy Paint. This Castor Has A Top Plate Measuring 200mm X 200mm with Bolt Hole Spacings Of 160mm X 160mm Drilled To 17mm Diameter. The Two Polyurethane Tyre on a Cast Iron Centre Wheels Each Have Ball Bearings Fitted To Reduce The Rolling Resistance. The Castor Has A 2000kg Load Rating At 4Km/H -
Out of Stock - On the Way
75mm Black Low Level High Load Swivel Castor, 540kg Capacity | Nylon Wheel, Roller Bearing (BMCS75E)
This High Load / Low Level Swivel Castor is made t... Read Moreo take a heavy load with a low overall height of 104mm. It has a 4 hole top plate measuring 105x79.5mm with 85.4x60.35mm bolt hole centres and the swivel head is fitted with a grease nipple. To enable the castor to operate under heavy loads of up to 540kg each castor (1,620kg total load capacity with 4 castors fitted), the swivel head has a heavy duty double ball bearing race. The caster wheel is heavy duty nylon with a 46mm tread width and needle roller bearing to reduce the rolling resistance and is an ideal castor for heavy duty applications, such as business machines, where there is an height restriction. The black nylon castor wheel will not damage concrete floors. -
Out of Stock - On the Way
200mm Swivel Castor, 500kg Capacity | Nylon Wheel, Plain Bore (822NY)
200mm Flexello Top Plate Swivel Castor (Pressed St... Read Moreeel) with 105x80mm Bolt Hole Centres. White Nylon Wheel with Plain Bore. Load Capacity = 500kg -
In Stock
100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH100RN1B)
100mm Blue Elastic Rubber Tyre wheel on a nylon... Read More centre with a roller bearing fitted into a pressed steel single bolt hole swivel castor bracket to suit a 12mm bolt. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a truly great performer.
-
Out of Stock - On the Way
Swivel Castor (Twin Wheel), 250mm, 2800kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST250PC2BD)
250mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor Fitted with A Directional Lock To Lock Swivel Head In A Fixed Direction. The Swivel Head Turns On Thrust and Taper Roller Bearings For Extra Strength and The Bracket Is Finished In Black Epoxy Paint.
This Castor Has A Top Plate Measuring 250mm X 250mm with Bolt Hole Spacings Of 190mm X 190mm Drilled To 19mm Diameter. The Two Polyurethane Tyre on a Cast Iron Centre Wheels Each Have Ball Bearings Fitted To Reduce The Rolling Resistance.
The Castor Has A 2800kg Load Rating At 4Km/H
-
In Stock
50mm Footmaster Castor with Levelling Foot, 150kg Capacity | Nylon Wheel, Plain Bore (KGDL50ASFNYN)
This 75mm Medium Duty Levelling Castor with a Blac... Read Morek Nylon wheel (Ball Bearing) and adjustable foot (GDL-50-ASF-NYN). This castor is a swivel castor with a load capacity of 150kg. The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear. The overall height of the castor is 73mm and the adjustable foot can extend by up to 10mm to enable precise levelling. The load capacity of this product is 150kg and the recommended maximum total load over 4 castors is 450kg. -
In Stock
150mm Fixed Castor, 910kg Capacity | Cast Iron Wheel, Ball Bearing (TFH150CI2H)
150mm Heavy Duty Top Plate Fixed Castor (Fabricate... Read Mored Castor) with 105x80 Hole Centres. Cast Iron Wheel with Ball Bearing. Load Capacity = 910kg Features of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
-
In Stock
200mm Swivel Castor, 6000kg Capacity | Machine Cast Nylon Wheel, Ball bearing (UGXT200ASFMCQ)
200mm Machine Ca... Read Morest Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with a grease nipple in the swivel head. The bolt holes centres are 210x160mm bolt hole centres and the load capacity is 6,000kg. This castor is Power Towable to 4km/h This super heavy duty high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical -
In Stock
125mm Swivel Castor with Brake, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV125RN1BSWB)
125mm Top Plate Swivel Castor with Swivel & Wheel ... Read MoreBrake (Pressed Steel) with 80x60 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg -
In Stock
150mm Shock Absorbing Fixed Castor, 360kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KGDSP150ARFMUD)
150mm Shock absorbing (14mm Compression) fixed ... Read Morecastor and Polyurethane Tyred Aluminium Wheel. Load Capacity = 360kg
For the compression performance, please see the image for the curve by clicking on the thumbnail image above. To use this curve, please calculate the weight being carried by this castor and divide that by the one less than the number of castors on your equipment, So if you have a trolley using 4 of these castors and the total weight being carried is 500kg, then the compression of the rubber pad is the reading given on the y axis at 167kg (500kg / 3 = 167kg) which is between 11 and 12mm.
-
Out of Stock - On the Way
250mm Swivel Castor with Brake, 1500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KS250PCB1500SWB)
250mm Top Plate Swivel Castor and Swivel & Whe... Read Moreel Brake (Industrial Castor) with 160x120 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1500kg -
In Stock
150mm Swivel Castor, 730kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH150PT15)
150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm bolt hole centres and 202mm overall height. The wheel has a Revvothane Polyurethane Tyre on a Cast Iron Centre with a Roller Bearing. Load Capacity = 730kg The Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm.- Use 12mm diameter bolts when fitting at 120 x 60mm
- Use 10mm diameter bolts when fitting at 105x80/75mm
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181