Gate Castors
Heavy Duty Gate Castor with 100mm Rubber Tyre Wheel, 75kg Spring loaded
Spring Loaded Heavy Duty Gate Castor with a robust 25.4mm square central steel stem - Zinc Galvanised for outside use. This gate castor has an overall height of 365mm and the fixing plate is pre-drilled with two fixing holes (to suit 8mm bolt) spaced 85mm apart. It moves on a fixed castor bracket fitted with a 100mm Rubber Tyre on a Cast Iron Centre Wheel with a 38mm Tread Width running on two ball bearingsView 2D drawing for product dimension by clicking on the thumbnail image above (below the main product image)This heavy duty gate castor is spring loaded to help with opening and closing a heavy gate and is suitable for use on uneven surfaces. The gate castor will help support the gate to help prevent hinge damage. The spring begins compression with a 20kg load and is fully compressed with a load of 75kg.
- Bearing Type: Ball Bearing
- Bolt Hole Size: 8mm
- Bracket Material: Pressed Steel
- Bracket Type: Fixed
- Load Capacity: 75kg
- Overall Height: 365mm
- Wheel Diameter: 100mm
- Wheel Tread Width: 38mm
- Wheel Type: Black Rubber Tyre / Cast Iron Centre
Spring Loaded Gate Castor with 100mm non-marking wheel, 57kg Load Capacity
Standard Gate Castor spring loaded for use on uneven surfaces. This gate castor comes with a swivel castor bracket with a 100mm non-marking wheel and has an overall height of 280mm. It comes pre-drilled with two 10mm fixing holes spaced 57mm apart.Spring loaded gate castors help with opening and closing heavy timber gates and are suitable for use on uneven surfaces. The gate castor will help support the gate to help prevent hinge damage
- Bearing Type: Plain Bore
- Bolt Hole Size: 10mm
- Bracket Material: Pressed Steel
- Bracket Type: Swivel
- Load Capacity: 57kg
- Overall Height: 280mm
- Wheel Diameter: 100mm
- Wheel Tread Width: 30mm
- Wheel Type: Black Plastic