Extra Heavy Duty Castors - Pressed Steel (Over 500kg Capacity)
Extra Heavy Duty Pressed Steel Castors
Our Extra Heavy Duty Pressed Steel Castors have individual load capacities of over 500kg per castor and are designed for demanding industrial applications involving high loads, continuous movement and harsh operating conditions.
Rather than us...ing vague terms such as “light-duty” or “heavy-duty”, we categorise these castors by actual load capacity. With castors ranging from 27kg to over 6000kg in our range, load rating provides a far more accurate guide when selecting the correct castor. If your equipment and payload exceed approximately 1500kg total load across 4 castors, this range is typically the correct starting point. These castors are commonly used on:
- Heavy industrial trolleys
- Manufacturing equipment
- Fabrication tables
- Transport dollies
- Machinery skids
- Heavy-duty mobile equipment
Plate Fixings for High Load Applications
Due to the loads involved, all castors in this range use heavy-duty rectangular top plate fixings, available with various bolt hole centres to suit different equipment designs.
Wheel Material Options
Wheel material selection depends on floor conditions, operating environment and rolling resistance requirements.
- Nylon Wheels – high load capacity and low rolling resistance on smooth floors
- Polyurethane Wheels – reduced floor marking, quieter operation and improved shock absorption
- Cast Iron Wheels – maximum load capacity for harsh industrial environments
Bearing Options
Different bearing types are available depending on the application and required rolling performance.
- Plain Bore – simple, cost-effective solution for lower movement frequency
- Roller Bearings – improved rolling performance under higher loads
- Ball Bearings – lower rolling resistance and smoother movement for continuous operation
Choosing the correct wheel and bearing combination helps reduce rolling resistance, improve manoeuvrability and extend castor service life under heavy loads. Read More
- Display 15 Products per page
-
In Stock175mm Fixed Castor (Powder Coated), 800kg Capacity | Polyurethane Tyre Wheel (KGHP175ARFMUD)
Original price was: £114.81.£66.89Current price is: £66.89. Sale!175mm Heavy-duty Fixed Castor with a Powder Coated ... Read More Pressed Steel Bracket and a 225mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball Bearings Features: 800kg Load Capacity: For the most demanding applications and heavy-duty loads. Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good. Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move. Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts Precision Engineered: These castors have no sideways movement on the wheel to provide exceptional operating performance. Click here for catalogue page -
In Stock175mm Swivel Castor (Powder Coated), 800kg Capacity | Polyurethane Tyre Wheel (KGHP175ASFMUD)
Original price was: £151.81.£88.44Current price is: £88.44. Sale!175mm Heavy-duty Swivel Castor with a Powder Coate ... Read Mored Pressed Steel Bracket and a 225mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball Bearings Features: 800kg Load Capacity: For the most demanding applications and heavy-duty loads. Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good. Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move. Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability. Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance. Click here for catalogue page -
In Stock175mm Swivel Castor with Brake (Powder Coated), 800kg Capacity | Polyurethane Tyre Wheel (KGHP175BSFMUD)
Original price was: £169.64.£98.82Current price is: £98.82. Sale!175mm Heavy-duty Swivel & Wheel Brake Castor w ... Read Moreith a Powder Coated Pressed Steel Bracket and a 225mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball Bearings Features: 800kg Load Capacity: For the most demanding applications and heavy-duty loads. Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good. Total Stop Brake System: Applying the brake pedal simultaneously locks both the wheel and the swivel rotation. Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move. Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability. Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance. Click here for catalogue page -
In Stock200mm Fixed Castor (Powder Coated), 900kg Capacity | Polyurethane Tyre Wheel (KGHP200ARFMUD)
Original price was: £130.16.£75.83Current price is: £75.83. Sale!200mm Heavy-duty Fixed Castor with a Powder Coated ... Read More Pressed Steel Bracket and a 250mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball Bearings Features: 900kg Load Capacity: For the most demanding applications and heavy-duty loads. Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good. Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move. Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts Precision Engineered: These castors have no sideways movement on the wheel to provide exceptional operating performance. Click here for catalogue page -
In Stock200mm Fixed Castor, 1045kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (888SUB)
£126.40200mm Top Plate Fixed Castor (Pressed Steel) with ... Read More140x73 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1045kg -
In Stock200mm Fixed Castor, 1090kg Capacity| Cast Iron Wheel, Roller Bearing (888CIB)
£70.38200mm Top Plate Fixed Castor with 140x73mm Bolt Ho ... Read Morele Centres each suiting an M10 fixing bolt. The heavy duty bracket is made from pressed steel with a bright zinc finish. The Cast Iron Wheel contains a Roller Bearing to reducing rolling resistance. The Load Capacity of this castor is 1090kg. Cast Iron Castor Wheels are a great choice for many rough service applications because they are strong, shock resistant and have a long working life. They have a very low tractive resistance which aids in the ease of movement and are not susceptible to picking up swarf and other floor debris which may hamper the performance of other Castor Wheel materials. -
In Stock200mm Fixed Castor, 800kg Capacity | Nylon Wheel, Ball Bearing (KF200NYBJ800)
£63.45200mm Fixed Castor with a 135mm x 110mm Top Plate ... Read Moreand 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon with two shielded ball bearings. Load Capacity = 800kg The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water. Being a hard tread it offers the lowest rolling resistance and easiest mobility. This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors -
In Stock200mm Swivel Castor (Powder Coated), 900kg Capacity | Polyurethane Tyre Wheel (KGHP200ASFMUD)
Original price was: £171.01.£99.62Current price is: £99.62. Sale!200mm Heavy-duty Swivel Castor with a Powder Coate ... Read Mored Pressed Steel Bracket and a 250mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball Bearings Features: 900kg Load Capacity: For the most demanding applications and heavy-duty loads. Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good. Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move. Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability. Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance. Click here for catalogue page -
In Stock200mm Swivel Castor with Brake (Powder Coated), 900kg Capacity | Polyurethane Tyre Wheel (KGHP200BSFMUD)
Original price was: £191.57.£111.60Current price is: £111.60. Sale!200mm Heavy-duty Swivel & Wheel Brake Castor w ... Read Moreith a Powder Coated Pressed Steel Bracket and a 250mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball Bearings Features: 900kg Load Capacity: For the most demanding applications and heavy-duty loads. Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good. Total Stop Brake System: Applying the brake pedal simultaneously locks both the wheel and the swivel rotation. Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move. Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability. Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance. Click here for catalogue page -
In Stock200mm Swivel Castor with Brake, 1045kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (855SUBSWB)
£191.40200mm Top Plate Swivel Castor and Swivel & Whe ... Read Moreel Brake (Pressed Steel) with 140x105 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1045kg -
In Stock200mm Swivel Castor with Brake, 800kg Capacity, Nylon Wheel, Ball Bearing (KS200NYBJ800SWB)
£103.89200mm Swivel Castor with Total Stop Brake (Heavy G ... Read Moreauge Pressed Steel Frame). This castor has a 135mm x 110mm Top Plate with 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon Castor Wheel with two ball bearings. Load Capacity = 800kg The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water. Being a hard tread it offers the lowest rolling resistance and easiest mobility. This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors -
In Stock200mm Swivel Castor, 800kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS200APCB800BR)
£108.85200mm Top Plate Swivel Castor with Total Stop Brak ... Read Moree (Heavy Gauge Pressed Steel Bracket) with 105x80mm Bolt Hole Centres. Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 800kg -
In Stock200mm Swivel Castor, 800kg Capacity, Nylon Wheel, Ball Bearing (KS200NYBJ800)
£83.93200mm Swivel Castor (Heavy Duty Pressed Steel) wit ... Read Moreh a 135mm x 110mm Top Plate and 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon with two shielded ball bearings. Load Capacity = 800kg The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water. Being a hard tread it offers the lowest rolling resistance and easiest mobility. This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors -
In Stock75mm Black Low Level High Load Swivel Castor, 540kg Capacity | Nylon Wheel, Roller Bearing (BMCS75E)
Original price was: £31.71.£21.56Current price is: £21.56. Sale!This High Load / Low Level Swivel Castor is made t ... Read Moreo take a heavy load with a low overall height of 104mm. It has a 4 hole top plate measuring 105x79.5mm with 85.4x60.35mm bolt hole centres and the swivel head is fitted with a grease nipple. To enable the castor to operate under heavy loads of up to 540kg each castor (1,620kg total load capacity with 4 castors fitted), the swivel head has a heavy duty double ball bearing race. The caster wheel is heavy duty nylon with a 46mm tread width and needle roller bearing to reduce the rolling resistance and is an ideal castor for heavy duty applications, such as business machines, where there is an height restriction. The black nylon castor wheel will not damage concrete floors. -
Out of Stock - On the Way75mm Low Level Fixed Castor, 540kg Capacity | Nylon Wheel, Roller Bearing (BMCF75E)
£21.12This low level business machine castor is made to ... Read Moretake a heavy load with a low overall height of 104mm. This Fixed Castor has a 4 hole top plate measuring 105x79.5mm with 85.4x60.35mm bolt hole centres. Load Capacity = 540kg using manual propulsion at 4km/h The castor wheel is heavy duty nylon with a 46mm tread width and needle roller bearing to reduce the rolling resistance and is ideal for heavy duty applications where there is an height restriction. The black nylon wheel is gentle on concrete floors.
