Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
- In Stock
100mm Swivel Castor, 300kg Capacity | Nylon Wheel, Ball bearing (MSK100NY2B)
£17.00100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 300kg - In Stock
100mm Swivel Castor with 24mm to 27mm Expander Fitting, 100kg Capacity | Rubber Tyre Wheel, Ball Bearing (194557)
Original price was: £7.30.£7.09Current price is: £7.09. Sale!... Read Morefont-weight: bold;">Excess Project Stock: 100mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) complete with a 24mm - 27mm Round Expander. The swivel head has a double ball race and the load capacity of this castor is 100kg using manual propulsion at 4km/h.
The expander fitting is designed to fit into an round hollow tube with an internal diameter of 24mm to 27mm.
This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance.
- Out of Stock - On the Way
- Out of Stock - On the Way
50mm Swivel Castor, 60kg Capacity | Nylon Wheel, Plain Bore (2KS050NYPL)
£5.8550mm Twin Wheel Top Plate Swivel Castor (Pressed S... Read Moreteel) with 38.5/48x38.5/48mm Fixing Bolt Holes. Nylon Wheel with Plain Bore. Load Capacity = 60kg - In Stock
100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (1321726)
£13.76100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg.This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm. - In Stock
63mm Footmaster Castor with Levelling Foot, 500kg Capacity | 63mm Nylon Wheel, Plain Bore (KGDH65ASFNYN)
Original price was: £62.55.£38.40Current price is: £38.40. Sale!This 63mm Swivel Castor has Black Nylon wheel (pla... Read Morein bore) with an extra long adjustable foot. The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear.The Threaded section of the Adjustable Foot extends a maximum of 60mm above the top of the top plate (78mm including the hex head). The Hex Head can be operated by a drill for quick operation.The overall height of the castor is 98mm and the adjustable foot can extend by up to 48mm to enable precise levelling.The load capacity is 500kg and the recommended maximum total load to be carried by 4 castors is 1,500kg. - In Stock
125mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Single Ball Bearing (MSVH125RN2B)
£15.95125mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has an Elastic Blue Rubber Tyred Wheel on a Nylon Centred Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. - In Stock
125mm High Temperature Swivel Castor, 150kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX125HT)
£33.09125mm High Temperature Swivel Castor (Pressed Stee... Read Morel). The top plate has four fixing holes with 80x60mm Bolt Hole spacing and the wheel is made from black phenolic resin with a smooth plain bore. It is Rated to +280 degrees C and has a load capacity of 150kg - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1321728)
£9.46100mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
50mm Low Level Swivel Castor, 160kg Capacity | Polyurethane Tyre Wheel, Plain Bore (MSTW050PT)
£13.9750mm Low Level Twin Wheel Swivel Castor (Keystone)... Read More with a round top plate. The Polyurethane tyre wheels have a tread width of 14mm each and turn on a smooth Plain Bore. The Load Capacity of 160kg.This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.The round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes) - Out of Stock - On the Way
- In Stock
125mm Swivel Castor, 170kg Capacity | Rubber Tyre Wheel, Roller Bearing (KS125UERBLACK)
£15.88125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80X60mm Hole Centres.Black Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 170kg - In Stock
150mm Swivel Castor, 520kg Capacity | Nylon Wheel, Plain Bore (661NY)
£33.27150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105mm Bolt Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 520kg - In Stock
160mm Swivel Castor, 135kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV160BRP1B)
£15.61160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Bolt Hole Centres. Black Rubber Tyre / Plastic Centre Wheel with Roller Bearing. Load Capacity = 135kg