- Sorry, this product cannot be purchased.
Castor Accessories and Fittings
Our range of castor fittings can adapt castor wheels to your requirements. We supply the fixings required to expand or reduce bolt holes as needed, replace ball bearings and wheel tubes, add castor wheel locks and more.
- Display 15 Products per page
-
In StockExpander Fitting, Round Tube, 21.5mm to 24mm (WR0721.5/24)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockRetaining Washer 10mm – Uncapped (STARLOCKWASHER10)
£0.2110mm Wheel Retaining Washer. Uncapped Push on fastener for 10mm axle shaft. -
In Stock6204-2RS Dual Rubber Sealed Ball Bearing 20mm x 47mm x 14mm (62042RS)
Original price was: £2.40.£1.68Current price is: £1.68. Sale!The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 20mm
- Outer Diameter: 47mm
- Width: 14mm
-
In StockM10 x 30mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM10X30)
£2.024 pack of M10 x 30mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M10 x 30mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M10 Nylon Insert (Nyloc) Nuts (11.5mm Height) with BZP finish.
- (Qty 4) M10 Washers (20mm outside diameter, 10.5mm inside diameter, 2.2mm thick) with BZP finish.
-
In StockSteel Wheel Tube: 20mm OD x 12.5mm ID x 61.5mm Len (TUBE2653010)
£2.02Steel wheel tube to reduce a 20mm bore to 12.5mm. ... Read MoreThis steel tube has a 20mm Outside Diameter x 12.5mm Inside Diameter and 61.5mm Long and suits an M12 bolt. The tube is to suit a castor wheel with a 20mm bore and 60mm hub length. -
In StockSteel Wheel Tube: 12mm OD x 8mm ID x 46mm Length (2731-0042)
£1.32Steel wheel tube to reduce a 12mm bore to 8mm. Thi... Read Mores steel tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and is 46mm Long to suits an M8 bolt. The tube is to suit a castor wheel with a 12mm bore and 45mm hub length. -
In Stock
Expander Fitting, Round Tube, 19mm to 21.5mm (WR0719/21.5)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 19mm to 21.5mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock
M12 x 40mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM12X40)
£2.894 pack of M12 x 40mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M12 x 40mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M12 Nylon Insert (Nyloc) Nuts (14mm Height) with BZP finish.
- (Qty 4) M12 Washers (24mm outside diameter, 13mm inside diameter, 2.7mm thick) with BZP finish.
-
In Stock
Steel Wheel Tube: 15mm OD x 10.8mm ID x 49mm Length (TUBE2662110)
£1.37Steel wheel tube to reduce a 15mm bore to 10.8mm b... Read Moreore to suit an M10 Bolt. This steel tube has a 15mm Outside Diameter x 10.8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. -
In Stock
Expander Fitting, Round Tube, 27mm to 30mm (WR0727/30)
£3.68Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockHeaded Spacer 20mm x 12mm x 1.5mm (sold in pairs) (2XKHSE)
£3.46A set of two machined steel top hat headed spacers... Read More to fit that fit into 20mm ball bearings to reduce the bearing bore to 12mm. The diameter of the top hat section is 25mm which has a 1.5mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 1.5mm each side of the wheel (3mm total increase to the hub length). The total length of the product is 18mm.
-
In StockRetaining Washer 25.4mm (1 Inch) (1″STARLOCKWASHER)
£1.7225.4mm (1 Inch) Domed (capped) Wheel Retaining Was... Read Moreher suitable for attaching wheels to a 1 Inch axle . -
In Stock
M8 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM8X25)
£1.904 pack of M8 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M8 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M8 Nylon Insert (Nyloc) Nuts (9.5mm Height) with BZP finish.
- (Qty 4) M8 Washers (16mm outside diameter, 8.4mm inside diameter, 1.8mm thick) with BZP finish.
-
In Stock6004-2RS Dual Rubber Sealed Ball Bearing 20mm x 42mm x 12mm (60042RS)
Original price was: £2.20.£1.54Current price is: £1.54. Sale!The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 20mm
- Outer Diameter: 42mm
- Width: 12mm
-
In StockDirectional Lock for 2HK Series Castors (HKDL)
£27.77Retro-fit Directional Lock for the 2HK Series Swiv... Read Moreel Castor (4-Way Directional Lock). Converts the following 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment:
