- Sorry, this product cannot be purchased.
Castor Accessories and Fittings
Our range of castor fittings can adapt castor wheels to your requirements. We supply the fixings required to expand or reduce bolt holes as needed, replace ball bearings and wheel tubes, add castor wheel locks and more.
- Display 15 Products per page
-
In StockExpander Fitting, Square Tube, 36mm to 40mm (WR4736/40)
£7.21Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 36mm to 40mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockExpander Fitting, Round Tube, 31mm to 35mm (WR0731/35)
£6.02Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 31mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockDirectional Lock for 2HK Series Castors (HKDL)
£27.77Retro-fit Directional Lock for the 2HK Series Swiv... Read Moreel Castor (4-Way Directional Lock). Converts the following 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment: -
In Stock6304-2RS Sealed Ball Bearing 20mm x 52mm x 15mm (6304RS)
Original price was: £4.01.£1.99Current price is: £1.99. Sale!The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 20mm
- Outer Diameter: 52mm
- Width: 15mm
-
In Stock16mm | 13mm Bolt Hole reducer Fitting (ACZ600)
£0.54Reducing insert for 16mm Single Bolt hole castors ... Read Moreto reduce the bolt hole size to 13mm to suit a 12mm Fixing Bolt. -
In StockHeaded Spacer 15mm x 10mm x 2mm (sold in pairs) (2XKHSA)
£3.09A set of two machined steel top hat headed spacers... Read More to fit that fit into 15mm ball bearings to reduce the bearing bore to 10mm. The diameter of the top hat section is 20mm which has a 2mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 2mm each side of the wheel (4mm total increase to the hub length). The total length of the product is 15mm.
-
In StockDirectional Lock for Revvo H Series Castors (9999-0181)
Original price was: £22.01.£20.64Current price is: £20.64. Sale!Retro-fit Directional Lock for the H Series Swivel... Read More Castor (4-Way Directional Lock). Converts any Revvo H Series 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment. Because of this, it in effect, shortens your bolt length by 4mm (the thickness of the D-lock). PLEASE NOTE: This product should not be used with castor with a foot because the brake makes contact with the Directional Lock and affects the swivel action. It can be used with a side mounted wheel lock.
-
In Stock
Expander Fitting, Square Tube, 32mm to 35mm (WR4732/35)
£6.86Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 32mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockM8 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM8X25)
£1.904 pack of M8 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M8 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M8 Nylon Insert (Nyloc) Nuts (9.5mm Height) with BZP finish.
- (Qty 4) M8 Washers (16mm outside diameter, 8.4mm inside diameter, 1.8mm thick) with BZP finish.
-
In StockCastor Fixing Plate 80mm x 60mm Bolt Hole Centres (PLATE100x85)
£3.34Our un-plated castor fixing plate is made for you ... Read Moreto weld / attach to your equipment to give you a suitable base to attach your castor. The plate measures 100x85mm and is 3mm thick. It comes with 4 diagonally slotted bolt fixing holes with 80mm x 60mm, or, 75mm x 45mm bolt hole centres. Each hole measures 9mm x 16mm and suits 8mm bolts. You can purchase the fixing bolts here -
In StockSteel Wheel Tube: 20mm OD x 12mm ID x 59mm Len (TUBE205912)
£2.02Steel wheel tube to reduce a 20mm bore to 12mm. Th... Read Moreis steel tube is 59mm Long and has a 20mm Outside Diameter with an internal diameter of 12mm. -
In StockSteel Wheel Tube: 15mm OD x 10.8mm ID x 49mm Length (TUBE2662110)
£1.37Steel wheel tube to reduce a 15mm bore to 10.8mm b... Read Moreore to suit an M10 Bolt. This steel tube has a 15mm Outside Diameter x 10.8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. -
In StockExpander Fitting, Square Tube, 21.5mm to 24mm (WR4721.5/24)
£3.04Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock
M6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.744 pack of M6 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M6 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M6 Nylon Insert (Nyloc) Nuts (8mm Height) with BZP finish.
- (Qty 4) M6 Washers (12mm outside diameter, 6.4mm inside diameter, 1.8mm thick) with BZP finish.
-
In StockRetaining Washer 20mm (STARLOCKWASHER20)
£1.7220mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 20mm axle .
