- Sorry, this product cannot be purchased.
Accessories and Fittings
- Display 15 Products per page
-
In StockExpander Fitting, Round Tube, 21.5mm to 24mm (WR0721.5/24)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockSteel Wheel Tube: 12mm OD x 8mm ID x 41mm Length (TUBE2802900)
£1.17Steel wheel tube to reduce a 12mm bore to 8.5mm bo... Read Morere to suit an M8 Bolt. This steel tube has a 12mm Outside Diameter x 8.5mm Inside Diameter and 41mm Long to suit a wheel with a 12mm bore and 40mm hub length. -
In StockDirectional Lock for 2HK Series Castors (HKDL)
£27.77Retro-fit Directional Lock for the 2HK Series Swiv... Read Moreel Castor (4-Way Directional Lock). Converts the following 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment: -
In StockCastor Fixing Plate 80mm x 60mm Bolt Hole Centres (PLATE100x85)
£3.34Our un-plated castor fixing plate is made for you ... Read Moreto weld / attach to your equipment to give you a suitable base to attach your castor. The plate measures 100x85mm and is 3mm thick. It comes with 4 diagonally slotted bolt fixing holes with 80mm x 60mm, or, 75mm x 45mm bolt hole centres. Each hole measures 9mm x 16mm and suits 8mm bolts. You can purchase the fixing bolts here -
In StockHeaded Spacer 20mm x 12mm x 1.5mm (sold in pairs) (2XKHSE)
£3.46A set of two machined steel top hat headed spacers... Read More to fit that fit into 20mm ball bearings to reduce the bearing bore to 12mm. The diameter of the top hat section is 25mm which has a 1.5mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 1.5mm each side of the wheel (3mm total increase to the hub length). The total length of the product is 18mm.
-
In StockExpander Fitting, Square Tube, 21.5mm to 24mm (WR4721.5/24)
£3.04Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockSteel Wheel Tube: 20mm OD x 12.5mm ID x 61.5mm Len (TUBE2653010)
£2.02Steel wheel tube to reduce a 20mm bore to 12.5mm. ... Read MoreThis steel tube has a 20mm Outside Diameter x 12.5mm Inside Diameter and 61.5mm Long and suits an M12 bolt. The tube is to suit a castor wheel with a 20mm bore and 60mm hub length. -
In StockExpander Fitting, Square Tube, 32mm to 35mm (WR4732/35)
£6.86Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 32mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockM6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.744 pack of M6 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M6 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M6 Nylon Insert (Nyloc) Nuts (8mm Height) with BZP finish.
- (Qty 4) M6 Washers (12mm outside diameter, 6.4mm inside diameter, 1.8mm thick) with BZP finish.
-
Out of Stock - On the WayTeflon Wheel Tube: 20mm OD x 8mm ID x 49mm Length (TEFLONTUBE49208)
£3.11Teflon wheel tube to reduce a 20mm bore to 8mm bor... Read Moree. This tube has a 20mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 20mm bore and 48mm hub length. -
In Stock
M12 x 40mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM12X40)
£2.894 pack of M12 x 40mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M12 x 40mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M12 Nylon Insert (Nyloc) Nuts (14mm Height) with BZP finish.
- (Qty 4) M12 Washers (24mm outside diameter, 13mm inside diameter, 2.7mm thick) with BZP finish.
-
In Stock6304-2RS Sealed Ball Bearing 20mm x 52mm x 15mm (6304RS)
Original price was: £4.01.£1.99Current price is: £1.99. Sale!The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 20mm
- Outer Diameter: 52mm
- Width: 15mm
-
In StockRetaining Washer 20mm (STARLOCKWASHER20)
£1.7220mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 20mm axle . -
In Stock6304-Z Sealed Ball Bearing 20mm x 52mm x 15mm (6304Z)
Original price was: £4.01.£2.29Current price is: £2.29. Sale!The
Key Features:
- Double metal Seals: Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 20mm
- Outer Diameter: 52mm
- Width: 15mm
-
In Stock6204ZZ Dual Metal Sealed Ball Bearing 20mm x 47mm x 14mm (6204ZZ)
£3.11The
Shielded on both sides with metal ZZ shields, this bearing is protected against dust and debris, making it ideal for demanding applications across industrial, automotive, and household machinery.
Key Features:
- Double Metal Shields (ZZ): Protects from contaminants while retaining lubricant for extended life.
- Standard Dimensions:
- Inner Diameter: 20mm
- Outer Diameter: 47mm
- Width: 14mm
