- Sorry, this product cannot be purchased.
Accessories and Fittings
- Display 15 Products per page
-
In StockSteel Pallet Feet 127mm x 127mm (KPF1A)
£4.07127mmx127mm Self-Colour Steel Pallet Feet (2.34 pl... Read Moreate thickness) and 56x56mm top to suit max. 50mm Square Post. -
In StockRetaining Washer 20mm (STARLOCKWASHER20)
£1.7220mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 20mm axle . -
In Stock6304-2RS Sealed Ball Bearing 20mm x 52mm x 15mm (6304RS)
£4.01Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm. The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. -
In StockExpander Fitting, Round Tube, 21.5mm to 24mm (WR0721.5/24)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In StockM10 x 30mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM10X30)
£2.024 pack of M10 x 30mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M10 x 30mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M10 Nylon Insert (Nyloc) Nuts (11.5mm Height) with BZP finish.
- (Qty 4) M10 Washers (20mm outside diameter, 10.5mm inside diameter, 2.2mm thick) with BZP finish.
-
In StockCastor Fixing Plate 80mm x 60mm Bolt Hole Centres (PLATE100x85)
£3.34Our un-plated castor fixing plate is made for you ... Read Moreto weld / attach to your equipment to give you a suitable base to attach your castor. The plate measures 100x85mm and is 3mm thick. It comes with 4 diagonally slotted bolt fixing holes with 80mm x 60mm, or, 75mm x 45mm bolt hole centres. Each hole measures 9mm x 16mm and suits 8mm bolts. You can purchase the fixing bolts here -
In StockHeaded Spacer 15mm x 10mm x 2mm (sold in pairs) (2XKHSA)
£3.09A set of two machined steel top hat headed spacers... Read More to fit that fit into 15mm ball bearings to reduce the bearing bore to 10mm. The diameter of the top hat section is 20mm which has a 2mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 2mm each side of the wheel (4mm total increase to the hub length). The total length of the product is 15mm.
-
In Stock
Retaining Washer 25.4mm (1 Inch) (1″STARLOCKWASHER)
£1.7225.4mm (1 Inch) Domed (capped) Wheel Retaining Was... Read Moreher suitable for attaching wheels to a 1 Inch axle . -
In StockCastor Fixing Plate 105mm x 80mm Bolt Hole Centres (PLATE135x110)
£4.33Our un-plated castor fixing plate is made for y... Read Moreou to weld / attach to your equipment to give you a suitable base to attach your castor.
The plate measures 135x110mm and is 3mm thick. It comes with 4 horizontally slotted bolt fixing holes with 105mm x 80mm bolt hole centres. Each hole measures 11mm x 15mm and suits 10mm bolts.
You can purchase the fixing bolts here
-
In Stock16mm | 13mm Bolt Hole reducer Fitting (ACZ600)
£0.54Reducing insert for 16mm Single Bolt hole castors ... Read Moreto reduce the bolt hole size to 13mm to suit a 12mm Fixing Bolt. -
In StockSteel Wheel Tube: 20mm OD x 12mm ID x 59mm Len (TUBE205912)
£2.02Steel wheel tube to reduce a 20mm bore to 12mm. Th... Read Moreis steel tube is 59mm Long and has a 20mm Outside Diameter with an internal diameter of 12mm. -
In Stock6304-Z Sealed Ball Bearing 20mm x 52mm x 15mm (6304Z)
£4.01Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm. The metal seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. -
In Stock
Expander Fitting, Round Tube, 31mm to 35mm (WR0731/35)
£6.02Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 31mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock
Expander Fitting, Round Tube, 19mm to 21.5mm (WR0719/21.5)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 19mm to 21.5mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. -
In Stock
M12 x 40mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM12X40)
£2.894 pack of M12 x 40mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M12 x 40mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M12 Nylon Insert (Nyloc) Nuts (14mm Height) with BZP finish.
- (Qty 4) M12 Washers (24mm outside diameter, 13mm inside diameter, 2.7mm thick) with BZP finish.
