Accessories and Fittings
- Display 15 Products per page
- In Stock
Retaining Washer 10mm – Uncapped (STARLOCKWASHER10)
£0.2010mm Wheel Retaining Washer. Uncapped Push on fastener for 10mm axle shaft. - In Stock
Steel Wheel Tube: 12mm OD x 8mm ID x 41mm Length (TUBE2802900)
£1.13Steel wheel tube to reduce a 12mm bore to 8.5mm bo... Read Morere to suit an M8 Bolt.This steel tube has a 12mm Outside Diameter x 8.5mm Inside Diameter and 41mm Long to suit a wheel with a 12mm bore and 40mm hub length. - In Stock
M6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.684 pack of M6 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M6 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M6 Nylon Insert (Nyloc) Nuts (8mm Height) with BZP finish.
- (Qty 4) M6 Washers (12mm outside diameter, 6.4mm inside diameter, 1.8mm thick) with BZP finish.
- In Stock
Retaining Washer 7/16″ (STARLOCKWASHER7/16)
£0.377/16 Inch Domed (Capped) Wheel Retainer suitable f... Read Moreor attaching wheels to a 7/16 Inch axle . - In Stock
6304-Z Sealed Ball Bearing 20mm x 52mm x 15mm (6304Z)
£3.87Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm.The metal seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. - In Stock
Teflon Wheel Tube: 15mm OD x 8mm ID x 49mm Length (TEFLONTUBE49158MM)
£2.34Teflon wheel tube to reduce a 15mm bore to 8mm bor... Read Moree.This tube has a 15mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. - In Stock
Retaining Washer 25m (STARLOCKWASHER25)
£1.6625mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 25mm axle . - In Stock
Directional Lock for 2HK Series Castors (HKDL)
£26.83Retro-fit Directional Lock for the 2HK Series Swiv... Read Moreel Castor (4-Way Directional Lock). Converts the following 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment: - In Stock
Steel Wheel Tube: 20mm OD x 12.5mm ID x 61.5mm Len (TUBE2653010)
£1.95Steel wheel tube to reduce a 20mm bore to 12.5mm. ... Read MoreThis steel tube has a 20mm Outside Diameter x 12.5mm Inside Diameter and 61.5mm Long and suits an M12 bolt.The tube is to suit a castor wheel with a 20mm bore and 60mm hub length. - In Stock
Steel Pallet Feet 152mm x152mm (KPF2)
£10.29152x152mm Self-Colour Steel Pallet Feet (5mm plat... Read Moree thickness) and 80x80mm top to suit max 80mm Square Post.