Castor Accessories and Fittings
Our range of castor fittings can adapt castor wheels to your requirements. We supply the fixings required to expand or reduce bolt holes as needed, replace ball bearings and wheel tubes, add castor wheel locks and more.
- Display 15 Products per page
In Stock6004-2RS Dual Rubber Sealed Ball Bearing 20mm x 42mm x 12mm (60042RS)
Original price was: £2.20.£1.87Current price is: £1.87.Sale!The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 20mm
- Outer Diameter: 42mm
- Width: 12mm
- In Stock
Teflon Wheel Tube: 15mm OD x 8mm ID x 49mm Length (TEFLONTUBE49158MM)
£2.43Teflon wheel tube to reduce a 15mm bore to 8mm bor... Read Moree.This tube has a 15mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. - In Stock
Retaining Washer 7/16″ (STARLOCKWASHER7/16)
£0.397/16 Inch Domed (Capped) Wheel Retainer suitable f... Read Moreor attaching wheels to a 7/16 Inch axle . - In Stock
M8 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM8X25)
£1.904 pack of M8 x 25mm High Tensile Steel Bolt, Nut (... Read Morenyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M8 x 25mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M8 Nylon Insert (Nyloc) Nuts (9.5mm Height) with BZP finish.
- (Qty 4) M8 Washers (16mm outside diameter, 8.4mm inside diameter, 1.8mm thick) with BZP finish.
- In Stock
Directional Lock for Revvo H Series Castors (9999-0181)
Original price was: £22.01.£20.64Current price is: £20.64.Sale!Retro-fit Directional Lock for the H Series Swivel... Read More Castor (4-Way Directional Lock). Converts any Revvo H Series 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment. Because of this, it in effect, shortens your bolt length by 4mm (the thickness of the D-lock).PLEASE NOTE: This product should not be used with castor with a foot because the brake makes contact with the Directional Lock and affects the swivel action. It can be used with a side mounted wheel lock. - In Stock
Expander Fitting, Square Tube, 27mm to 30mm (WR4727/30)
£4.07Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
Headed Spacer 15mm x 10mm x 2mm (sold in pairs) (2XKHSA)
£3.09A set of two machined steel top hat headed spacers... Read More to fit that fit into 15mm ball bearings to reduce the bearing bore to 10mm.The diameter of the top hat section is 20mm which has a 2mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 2mm each side of the wheel (4mm total increase to the hub length).The total length of the product is 15mm. - In Stock
6000-2RS Dual Rubber Sealed Ball Bearing 10mm x 26mm x 8mm (60002RS)
Original price was: £1.85.£1.57Current price is: £1.57.Sale!The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 10mm
- Outer Diameter: 26mm
- Width: 8mm
- In Stock
Expander Fitting, Round Tube, 21.5mm to 24mm (WR0721.5/24)
£3.19Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 21.5mm to 24mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
6202-2RS Dual Rubber Sealed Ball Bearing 15mm x 35mm x 11mm (62022RS)
Original price was: £1.95.£1.66Current price is: £1.66.Sale!The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 15mm
- Outer Diameter: 35mm
- Width: 11mm
- Out of Stock - On the Way
Teflon Wheel Tube: 20mm OD x 8mm ID x 49mm Length (TEFLONTUBE49208)
£3.11Teflon wheel tube to reduce a 20mm bore to 8mm bor... Read Moree.This tube has a 20mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 20mm bore and 48mm hub length. - In Stock
6204ZZ Dual Metal Sealed Ball Bearing 20mm x 47mm x 14mm (6204ZZ)
£3.11The
Shielded on both sides with metal ZZ shields, this bearing is protected against dust and debris, making it ideal for demanding applications across industrial, automotive, and household machinery.
Key Features:
- Double Metal Shields (ZZ): Protects from contaminants while retaining lubricant for extended life.
- Standard Dimensions:
- Inner Diameter: 20mm
- Outer Diameter: 47mm
- Width: 14mm
- In Stock
Expander Fitting, Square Tube, 32mm to 35mm (WR4732/35)
£6.86Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 32mm to 35mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
Retaining Washer 25.4mm (1 Inch) (1″STARLOCKWASHER)
£1.7225.4mm (1 Inch) Domed (capped) Wheel Retaining Was... Read Moreher suitable for attaching wheels to a 1 Inch axle . - In Stock
Steel Wheel Tube: 15mm OD x 10.8mm ID x 49mm Length (TUBE2662110)
£1.37Steel wheel tube to reduce a 15mm bore to 10.8mm b... Read Moreore to suit an M10 Bolt.This steel tube has a 15mm Outside Diameter x 10.8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length.
