Castor Accessories and Fittings
Our range of castor fittings can adapt castor wheels to your requirements. We supply the fixings required to expand or reduce bolt holes as needed, replace ball bearings and wheel tubes, add castor wheel locks and more.
- Display 15 Products per page
In StockExpander Fitting, Round Tube, 27mm to 30mm (WR0727/30)
£5.81Round Expander Fitting to suit round tube with int... Read Moreernal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm.- In Stock
Steel Pallet Feet 127mm x 127mm (KPF1A)
£4.07Pallet Feet: 127mm X 127mm Self-C... Read Moreolour Steel Pallet Feet (2.34 plate thickness) and 56x56mm top to suit max. 50mm Square Post. - In Stock
Retaining Washer 10mm – Uncapped (STARLOCKWASHER10)
£0.2110mm Wheel Retaining Washer. Uncapped Push on fastener for 10mm axle shaft. - In Stock
Headed Spacer 15mm x 10mm x 2mm (sold in pairs) (2XKHSA)
£3.09A set of two machined steel top hat headed spacers... Read More to fit that fit into 15mm ball bearings to reduce the bearing bore to 10mm.The diameter of the top hat section is 20mm which has a 2mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 2mm each side of the wheel (4mm total increase to the hub length).The total length of the product is 15mm. - In Stock
Expander Fitting, Square Tube, 27mm to 30mm (WR4727/30)
£4.07Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 27mm to 30mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
Steel Wheel Tube: 12mm OD x 8mm ID x 45mm Length (TUBE124508)
£1.17Steel wheel tube to reduce a 12mm bore to 8.2mm bo... Read Morere to suit an M8 Bolt.This steel tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and 45mm Long to suit a wheel with a 12mm bore and 44.4mm hub length. - In Stock
Directional Lock for 2HK Series Castors (HKDL)
£27.77Retro-fit Directional Lock for the 2HK Series Swiv... Read Moreel Castor (4-Way Directional Lock). Converts the following 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment: - In Stock
Steel Pallet Feet 152mm x152mm (KPF2)
£10.66Pallet Feet: 152x152mm Self-Colou... Read Morer Steel Pallet Feet (5mm plate thickness) and 80x80mm top to suit max 80mm Square Post. - In Stock
Expander Fitting, Square Tube, 19mm to 21.5mm (WR4719/21.5)
£3.10Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 19mm to 21.5mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm. - In Stock
M6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.744-Pack M6 x 25mm High Tensile Steel Bolt, Nyloc Nu... Read Moret & Washer Set – Bright Zinc PlatedSecure your castors with confidence using this 4-pack of high-strength M6 x 25mm bolt sets. Each set includes a high tensile steel bolt, nyloc nut, and washer — everything you need for a reliable, vibration-resistant fit.Key Features:- High Strength: M6 x 25mm threaded bolts, Grade 8.8 high tensile steel for durability and load-bearing performance.
- Vibration Resistant: Nyloc nuts feature a nylon insert that grips the bolt thread to prevent loosening during movement.
- Corrosion Protection: All components are finished in Bright Zinc Plate (BZP) for long-lasting resistance to rust and wear.
- 4 × M6 x 25mm Hex Set Bolts (Grade 8.8, BZP finish)
- 4 × M6 Nyloc Nuts (8mm height, BZP finish)
- 4 × M6 Washers (12mm OD × 6.4mm ID × 1.8mm thick, BZP finish)
- In Stock
Headed Spacer 20mm x 12mm x 1.5mm (sold in pairs) (2XKHSE)
£3.46A set of two machined steel top hat headed spacers... Read More to fit that fit into 20mm ball bearings to reduce the bearing bore to 12mm.The diameter of the top hat section is 25mm which has a 1.5mm thick shoulder that increases the wheel's hub length (the distance through the central bore) by 1.5mm each side of the wheel (3mm total increase to the hub length).The total length of the product is 18mm. - In Stock
Directional Lock for Revvo H Series Castors (9999-0181)
Original price was: £22.01.£20.64Current price is: £20.64.Sale!Retro-fit Directional Lock for the H Series Swivel... Read More Castor (4-Way Directional Lock). Converts any Revvo H Series 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment. Because of this, it in effect, shortens your bolt length by 4mm (the thickness of the D-lock).PLEASE NOTE: This product should not be used with castor with a foot because the brake makes contact with the Directional Lock and affects the swivel action. It can be used with a side mounted wheel lock. - In Stock
M12 x 40mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM12X40)
£2.894-Pack M12 x 40mm High Tensile St... Read Moreeel Bolt, Nyloc Nut & Washer Set – Bright Zinc PlatedSecure your castors with confidence using this 4-pack of high-strength M12 x 40mm bolt sets. Each set includes a high tensile steel bolt, nyloc nut, and washer - everything you need for a reliable, vibration-resistant fit.Key Features:- High Strength: M12 x 40mm threaded bolts, Grade 8.8 high tensile steel for durability and load-bearing performance.
- Vibration Resistant: Nyloc nuts feature a nylon insert that grips the bolt thread to prevent loosening during movement.
- Corrosion Protection: All components are finished in Bright Zinc Plate (BZP) for long-lasting resistance to rust and wear.
- 4 × M12 x 40mm Hex Set Bolts (Grade 8.8, BZP finish)
- 4 × M12 Nyloc Nuts (14mm height, BZP finish)
- 4 × M12 Washers (24mm OD × 13mm ID × 2.7mm thick, BZP finish)
- In Stock
6204-2RS Dual Rubber Sealed Ball Bearing 20mm x 47mm x 14mm (62042RS)
Original price was: £2.40.£1.68Current price is: £1.68.Sale!The
Key Features:
- Double Rubber Seals (2RS): Provides enhanced sealing for better protection in harsh environments.
- Standard Dimensions:
- Inner Diameter: 20mm
- Outer Diameter: 47mm
- Width: 14mm
- In Stock
Expander Fitting, Square Tube, 24mm to 27mm (WR4724/27)
£3.22Square Expander Fitting to suit square tube with i... Read Morenternal diameter from 24mm to 27mm. 10mm bolt included. If fitting through a 12mm single bolt hole castor, please purchase ACZ500 to reduce the Bolt Hole to 10mm.
