Accessories and Fittings
- Display 15 Products per page
- In Stock
Teflon Wheel Tube: 15mm OD x 8mm ID x 49mm Length (TEFLONTUBE49158MM)
£2.34Teflon wheel tube to reduce a 15mm bore to 8mm bor... Read Moree.This tube has a 15mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length. - In Stock
Retaining Washer 25m (STARLOCKWASHER25)
£1.6625mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 25mm axle . - In Stock
Retaining Washer 7/16″ (STARLOCKWASHER7/16)
£0.377/16 Inch Domed (Capped) Wheel Retainer suitable f... Read Moreor attaching wheels to a 7/16 Inch axle . - In Stock
6304-2RS Sealed Ball Bearing 20mm x 52mm x 15mm (6304RS)
£3.87Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 52mm, and a width of 15mm.The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. - In Stock
Retaining Washer 25.4mm (1 Inch) (1″STARLOCKWASHER)
£1.6025.4mm (1 Inch) Domed (capped) Wheel Retaining Was... Read Moreher suitable for attaching wheels to a 1 Inch axle . - In Stock
Castor Fixing Plate 105mm x 80mm Bolt Hole Centres (PLATE135x110)
£4.18Our un-plated castor fixing plate is made for y... Read Moreou to weld / attach to your equipment to give you a suitable base to attach your castor.
The plate measures 135x110mm and is 3mm thick. It comes with 4 horizontally slotted bolt fixing holes with 105mm x 80mm bolt hole centres. Each hole measures 11mm x 15mm and suits 10mm bolts.
You can purchase the fixing bolts here
- In Stock
Directional Lock for 2HK Series Castors (HKDL)
£26.83Retro-fit Directional Lock for the 2HK Series Swiv... Read Moreel Castor (4-Way Directional Lock). Converts the following 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment: - In Stock
6204-2RS Sealed Ball Bearing 20mm x 47mm x 14mm (62042RS)
£1.37Ball Bearings with an inside diameter of 20mm, an ... Read Moreoutside diameter of 47mm, and a width of 14mm.The rubber seals on the ball bearing protect the ball bearings from dirt ingress and also helps with lubricant retention. - In Stock
Retaining Washer 10mm – Uncapped (STARLOCKWASHER10)
£0.2010mm Wheel Retaining Washer. Uncapped Push on fastener for 10mm axle shaft. - In Stock
Directional Lock for Revvo H Series Castors (9999-0181)
Original price was: £20.54.£19.94Current price is: £19.94. Sale!Retro-fit Directional Lock for the H Series Swivel... Read More Castor (4-Way Directional Lock). Converts any Revvo H Series 'swivel only' castor into fixed for straight line travel. Insert the fixing bolt through both the directional lock bolt holes and the castors bolt holes when fitting to equipment. Because of this, it in effect, shortens your bolt length by 4mm (the thickness of the D-lock).PLEASE NOTE: This product should not be used with castor with a foot because the brake makes contact with the Directional Lock and affects the swivel action. It can be used with a side mounted wheel lock. - In Stock
M10 x 30mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM10X30)
£1.884 pack of M10 x 30mm High Tensile Steel Bolt, Nut ... Read More(nyloc), and Washer sets to fix your castors to your equipment. Nyloc Nuts contain a nylon insert that grips onto the bolt and prevents the nut from loosening due to the vibration that occurs when the castor wheel is moving. The pack contains:- (Qty 4) M10 x 30mm Threaded Bolts Grade 8.8 Hex Set finished in Bright Zinc Plate (BZP).
- (Qty 4) M10 Nylon Insert (Nyloc) Nuts (11.5mm Height) with BZP finish.
- (Qty 4) M10 Washers (20mm outside diameter, 10.5mm inside diameter, 2.2mm thick) with BZP finish.
- In Stock
Teflon Wheel Tube: 20mm OD x 8mm ID x 49mm Length (TEFLONTUBE49208)
£3.00Teflon wheel tube to reduce a 20mm bore to 8mm bor... Read Moree.This tube has a 20mm Outside Diameter x 8mm Inside Diameter and 49mm Long to suit a wheel with a 20mm bore and 48mm hub length.