Castor Accessories and Fittings
Our range of castor fittings can adapt castor wheels to your requirements. We supply the fixings required to expand or reduce bolt holes as needed, replace ball bearings and wheel tubes, add castor wheel locks and more.
- Display 15 Products per page
In StockM10 x 30mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM10X30)
£2.024-Pack M10 x 30mm High Tensile St... Read Moreeel Bolt, Nyloc Nut & Washer Set – Bright Zinc PlatedSecure your castors with confidence using this 4-pack of high-strength M10 x 30mm bolt sets. Each set includes a high tensile steel bolt, nyloc nut, and washer - everything you need for a reliable, vibration-resistant fit.Key Features:- High Strength: M10 x 30mm threaded bolts, Grade 8.8 high tensile steel for durability and load-bearing performance.
- Vibration Resistant: Nyloc nuts feature a nylon insert that grips the bolt thread to prevent loosening during movement.
- Corrosion Protection: All components are finished in Bright Zinc Plate (BZP) for long-lasting resistance to rust and wear.
- 4 × M10 x 30mm Hex Set Bolts (Grade 8.8, BZP finish)
- 4 × M10 Nyloc Nuts (11.5 mm height, BZP finish)
- 4 × M10 Washers (20mm OD × 10.5mm ID × 2.2mm thick, BZP finish)
- In Stock
M12 x 40mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM12X40)
£2.894-Pack M12 x 40mm High Tensile St... Read Moreeel Bolt, Nyloc Nut & Washer Set – Bright Zinc PlatedSecure your castors with confidence using this 4-pack of high-strength M12 x 40mm bolt sets. Each set includes a high tensile steel bolt, nyloc nut, and washer - everything you need for a reliable, vibration-resistant fit.Key Features:- High Strength: M12 x 40mm threaded bolts, Grade 8.8 high tensile steel for durability and load-bearing performance.
- Vibration Resistant: Nyloc nuts feature a nylon insert that grips the bolt thread to prevent loosening during movement.
- Corrosion Protection: All components are finished in Bright Zinc Plate (BZP) for long-lasting resistance to rust and wear.
- 4 × M12 x 40mm Hex Set Bolts (Grade 8.8, BZP finish)
- 4 × M12 Nyloc Nuts (14mm height, BZP finish)
- 4 × M12 Washers (24mm OD × 13mm ID × 2.7mm thick, BZP finish)
- In Stock
M6 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM6X25)
£1.744-Pack M6 x 25mm High Tensile Steel Bolt, Nyloc Nu... Read Moret & Washer Set – Bright Zinc PlatedSecure your castors with confidence using this 4-pack of high-strength M6 x 25mm bolt sets. Each set includes a high tensile steel bolt, nyloc nut, and washer — everything you need for a reliable, vibration-resistant fit.Key Features:- High Strength: M6 x 25mm threaded bolts, Grade 8.8 high tensile steel for durability and load-bearing performance.
- Vibration Resistant: Nyloc nuts feature a nylon insert that grips the bolt thread to prevent loosening during movement.
- Corrosion Protection: All components are finished in Bright Zinc Plate (BZP) for long-lasting resistance to rust and wear.
- 4 × M6 x 25mm Hex Set Bolts (Grade 8.8, BZP finish)
- 4 × M6 Nyloc Nuts (8mm height, BZP finish)
- 4 × M6 Washers (12mm OD × 6.4mm ID × 1.8mm thick, BZP finish)
- In Stock
M8 x 25mm High Tensile Steel Bolt, Nut & Washer Set (BOLTSETM8X25)
£1.904-Pack M8 x 25mm High Tensile Ste... Read Moreel Bolt, Nyloc Nut & Washer Set – Bright Zinc PlatedSecure your castors with confidence using this 4-pack of high-strength M8 x 25mm bolt sets. Each set includes a high tensile steel bolt, nyloc nut, and washer - everything you need for a reliable, vibration-resistant fit.Key Features:- High Strength: M8 x 25mm threaded bolts, Grade 8.8 high tensile steel for durability and load-bearing performance.
- Vibration Resistant: Nyloc nuts feature a nylon insert that grips the bolt thread to prevent loosening during movement.
- Corrosion Protection: All components are finished in Bright Zinc Plate (BZP) for long-lasting resistance to rust and wear.
- 4 × M8 x 25mm Hex Set Bolts (Grade 8.8, BZP finish)
- 4 × M8 Nyloc Nuts (9.5mm height, BZP finish)
- 4 × M8 Washers (16mm OD × 8.4mm ID × 1.8mm thick, BZP finish)
- In Stock
Retaining Washer 10mm – Uncapped (STARLOCKWASHER10)
£0.2110mm Wheel Retaining Washer. Uncapped Push on fastener for 10mm axle shaft. - In Stock
Retaining Washer 20mm (STARLOCKWASHER20)
£1.7220mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 20mm axle . - In Stock
Retaining Washer 25.4mm (1 Inch) (1″STARLOCKWASHER)
£1.7225.4mm (1 Inch) Domed (capped) Wheel Retaining Was... Read Moreher suitable for attaching wheels to a 1 Inch axle . - In Stock
Retaining Washer 25m (STARLOCKWASHER25)
£1.7225mm Domed (Capped) Wheel Retainer suitable for at... Read Moretaching wheels to a 25mm axle . - In Stock
Retaining Washer 7/16″ (STARLOCKWASHER7/16)
£0.397/16 Inch Domed (Capped) Wheel Retainer suitable f... Read Moreor attaching wheels to a 7/16 Inch axle . - In Stock
Steel Pallet Feet 127mm x 127mm (KPF1A)
£4.07Pallet Feet: 127mm X 127mm Self-C... Read Moreolour Steel Pallet Feet (2.34 plate thickness) and 56x56mm top to suit max. 50mm Square Post. - In Stock
Steel Pallet Feet 152mm x152mm (KPF2)
£10.66Pallet Feet: 152x152mm Self-Colou... Read Morer Steel Pallet Feet (5mm plate thickness) and 80x80mm top to suit max 80mm Square Post. - In Stock
Steel Wheel Tube: 12mm OD x 8mm ID x 41mm Length (TUBE2802900)
£1.17Steel wheel tube to reduce a 12mm bore to 8.2mm bo... Read Morere to suit an M8 Bolt.This steel tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and 41mm Long to suit a wheel with a 12mm bore and 40mm hub length. - In Stock
Steel Wheel Tube: 12mm OD x 8mm ID x 45mm Length (TUBE124508)
£1.17Steel wheel tube to reduce a 12mm bore to 8.2mm bo... Read Morere to suit an M8 Bolt.This steel tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and 45mm Long to suit a wheel with a 12mm bore and 44.4mm hub length. - In Stock
Steel Wheel Tube: 12mm OD x 8mm ID x 46mm Length (2731-0042)
£1.32Steel wheel tube to reduce a 12mm bore to 8mm. Thi... Read Mores steel tube has a 12mm Outside Diameter x 8.2mm Inside Diameter and is 46mm Long to suits an M8 bolt.The tube is to suit a castor wheel with a 12mm bore and 45mm hub length. - In Stock
Steel Wheel Tube: 15mm OD x 10.8mm ID x 49mm Length (TUBE2662110)
£1.37Steel wheel tube to reduce a 15mm bore to 10.8mm b... Read Moreore to suit an M10 Bolt.This steel tube has a 15mm Outside Diameter x 10.8mm Inside Diameter and 49mm Long to suit a wheel with a 15mm bore and 48mm hub length.
