- Sorry, this product cannot be purchased.
Braked Castors
Braked Castors are sometimes referred to as lockable castors and it is usually swivel castors that have brakes. The Brake can lock either the wheel (Wheel Brake), the swivel head (Directional Lock), or both simultaneously (Total Stop or Swivel & Wheel Brake). It is un...common to find a fixed castor with a brake. Our GD Series of shock absorbing castors is one of the few that do. See GDS Shock Absorbing Castors here.Braked Castors can swivel the wheel 360 degrees about the vertical axis. They consist of a housing with a lockable brake and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor’s frame or bracket.
The plate fitting determines how the castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Braked Castors, like Swivel Castors, can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Braked Castor Offset
The Braked Castor’s offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason any swivelling castor will go in the direction you want it to go regardless its starting direction. Read More
- Display 15 Products per page
-
In Stock80mm Swivel Castor with Brake, 130kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV080RN2BSWB)
£10.8080mm Blue Elastic Rubber Tyre wheel on a nylon cen... Read Moretre with a ball bearing fitted into a pressed steel swivel & brake castor bracket. The Swivel Brake Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed) The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a truly great performer.</p> -
In Stock75mm Swivel Castor with Brake, 70kg Capacity | Polypropylene Wheel, Plain Bore (LSV075PPBR)
£4.7175mm white polypropylene Wheel fitted into a Top P... Read Morelate Swivel with brake Castor with 55x42mm bolt hole centres. The load capacity of this castor is 50kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a hard white polypropylene wheel that won't damage concrete floors. The hard tread lowers the rolling and swivelling resistance making this castor easier to push compared to softer treads. This castor is ideal for most domestic or industrial applications where a small yet sturdy braked castor in needed. -
In Stock50mm Shock Absorbing Fixed & Brake Castor, 40kg Capacity | Polyurethane Tyre Wheel (GDS050B65RF)
Original price was: £51.07.£34.54Current price is: £34.54. Sale!50mm Shock absorbing Fixed Castor with a Brake. Th... Read Moree top plate measures 55x55mm with 42x42mm fixing bolt holes centres to suit 6mm fixing bolts. The wheel as a soft (Shore 80A) polyurethane tyre for high elasticity and is fitted with a precision ball bearing. This castor has as load capacity of 40kg. The brake locks the wheel only allowing the swivel head to rotate freely when applied. The Top Plate is made from pressed steel and the frame is aluminium. The parts have powder coated and zinc plated for protection The shock absorbing functions means that the overall height can vary by 10mm. The castor's height without load is 100mm and this reduces incrementally by up to 10mm as the load increases providing up t0 10mm of compression for a fine shock absorbing function. -
In Stock125mm Swivel with Brake Castor, 400kg Capacity, Nylon Wheel, Ball Bearing (KS125NYBJ400SWB)
£69.10125mm Swivel Castor with Total Stop Brake (Heavy D... Read Moreuty Pressed Steel). This castors has a 135mm x 110mm Top Plate with 105x80mm Fixing Hole spacings. The castor wheel is a Solid White Nylon Castor Wheel with two ball bearings. Load Capacity = 400kg -
In Stock75mm Swivel Castor with Brake, 150kg Capacity | Polyurethane Tyre Wheel, Plain Bore (361SUBR)
£34.1075mm Top Plate Swivel Castor with Footbrake (Press... Read Moreed Steel) with 80x60mm Bolt Hole Centres and 95mm Overall Height. Polyurethane Tyre on a Cast Iron Centre castor wheel with 29mm Tread Width and Smooth Plain Bore. Load Capacity = 150kg -
In Stock150mm Swivel Castor with Brake, 600kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (HPTS150PNB)
£53.63150mm Top Plate Swivel Castor and Swivel & Whe... Read Moreel Brake with 105x80mm Hole Centres. The castor has an overall height of 210mm and the wheel has a tread width of 45mm. The load capacity is 600kg using manual propulsion at 4km/h (walking speed) The Polyurethane Tyre wheel with a Nylon Centre Wheel contains a Roller Bearing to reduce the rolling resistance. -
In Stock100mm Heavy Duty Swivel Brake Castor, 500kg Capacity | White Nylon Wheel, Ball Bearing (HSV100NY2BBR)
£31.01100mm Heavy Duty Top Plate Swivel and Brake Castor... Read More with Heavy Gauge Pressed Steel and a load capacity of 500kg. The swivel head has a double ball race with hardened ball race track. The brake is a Total Stop Brake which is also known as a Swivel and Wheel Brake. This type of brake locks both the wheel and the swivel head so that the swivel head will not rotate while the brake is applied. The Top Plate measure 105x80mm with 80x60mm Fixing Bolt Hole Centres. The bolt holes are slotted to 80/75x60/55mm and suits 8mm Bolts. The castor wheel is a white nylon wheel (polyamide) with a 37mm tread width and fitted with two precision ball bearings. The hard wheel is non-marking and has the lowest rolling and swivel resistance. This castor is an excellent all purpose heavy duty castor. It is often used with high load mobile storage and transportation equipment in domestic, mechanical and industrial applications. Download HDV Series Datasheet Here -
In Stock100mm LAG Swivel Castor with Brake, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (23606FR)
£70.48100mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (LAG Pressed Steel) with a large Top Plate measuring 135 x 110mm and 105 x 80mm Fixing Bolt Hole Centres. This caster has an overall height of 137mm and an offset of 37mm. The wheel is a quality Polyurethane Tyre on Cast Iron Centre Wheel with a 40mm Tread Width and Ball Bearings. Load Capacity = 300kg A Total Stop Brake means that when applied, both the wheel and swivel rotation is stopped. -
In Stock150mm Swivel Castor with Brake, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KBMG150PCB)
£67.96150mm Top Plate Swivel Castor With Brake (Fabricat... Read Moreed Steel) with a Polyurethane Tyre wheel with a Cast Iron Centre and Ball Bearings. Load Capacity = 500kg using manual propulsion at 4km/h. Key Specifications:- Brake Style: Swivel & Wheel brake (Total Stop Brake) which locks both the wheel and the swivel rotation
- Double Pedal Brake
- Top Plate Size: 140mm x 110mm
- Bolt Hole Centres: Slotted to 114x87mm / 97.5x71.5mm
- Overall Height: 190mm
- Tread Width: 45mm
-
In Stock200mm Swivel Castor with Brake, 1150kg Capacity | Cast Iron Wheel, Roller Bearing (TSH200CI15F)
£146.24200mm Heavy Duty Top Plate Swivel Castor With Swiv... Read Moreel & Wheel Brake (Fabricated Castor) with 105x80mm Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 1150kg The Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm.- Use 12mm diameter bolts when fitting at 120 x 60mm
- Use 10mm diameter bolts when fitting at 105x80/75mm
-
In Stock100mm Swivel Castor with Brake, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK100PC2BBR)
£37.05100mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (Pressed Steel). This caster has a Top Plate measuring 105x80mm with 80x60mm Fixing Bolt Hole Centres. The overall height is 132mm and the wheel has a Polyurethane Tyre on a Cast Iron Centre Wheel with a 40mm Tread Width and Ball Bearings. Load Capacity = 300kg A total stop brake means that when the brake is applied both the wheel and the swivel rotation is stopped. -
In Stock100mm Swivel Castor with Brake | Polyurethane Tyre Wheel, Roller Bearing, 180kg Capacity (MBZ100PN1B)
Original price was: £15.17.£11.43Current price is: £11.43. Sale!100mm Swivel & Brake Top Plate Castor with a 4... Read More-hole top plate with 80x60 Fixing Bolt Hole Centres. The castor's wheel has a Red Polyurethane Tyre (Shore A 92) on a White Nylon Centre Wheel with a roller bearing. The load capacity of this castor is 180kg using manual propulsion at 4km/h (walking speed) Key Specification:- Top Plate Size: 105x80mm
- Bolt Hole Centres: 80/76X60mm
- Bolt Hole Size: 9mm (to suit M8 Fixing Bolts)
- Brake Style: Swivel & Wheel Brake. Also known as a Total Stop Brake because it locks both the wheel and the swivel rotation when applied.
- Overall Height: 125mm
- Offset: 40mm
- Swivel Radius: 130mm
- Tread width: 34mm
- Bearing Type: Roller Bearing
- Tyre Hardness: Shore A 92
- Key Features:
- High Load Capacity
- Low Rolling Resistance
- High Wear Resistance
- Reduce Vibration
- Low noise Operation
-
In Stock125mm Swivel Castor with Brake, 250kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSK125RN1BBR)
£23.97125mm Top Plate Swivel Castor with a Total Stop Br... Read Moreake (Pressed Steel) and 80x60mm Bolt Hole Centres. The overall height of the castor is 157mm and the Blue Elastic Rubber Tyre with a Nylon Centre Wheel contains a Roller Bearing and has a 40m Tread Width. Load Capacity = 250kg. This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications. Blue elastic rubber tyres provide the benefits of a rubber tyre wheel such as being gentle on floors and absorbing fine vibrations but they can hold more weight and are non-marking. They are a great solution if you need a rubber tyre wheel but the load being carried is too much for a castor with a standard rubber tyre wheel.
-
In Stock160mm Swivel Castor with Brake, 300kg Capacity | Nylon Wheel, Roller Bearing (MSV160NY1BSWB)
£25.35160mm Top Plate Swivel Castor with Swivel & Wh... Read Moreeel Brake (Pressed Steel) with 105x80 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 300kg -
In Stock50mm Stainless Steel Swivel Castor With Brake, 50kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKATB050TPR)
£10.37This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 50mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has total stop brake and a 60x60mm 4 hole Top Plate with slotted fixing bolt holes at 48/39x48/39mm. The load capacity of this castor is 50kg using manual propulsion at 4km/h The grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Download Series Data Sheet here
