- Sorry, this product cannot be purchased.
Braked Castors
Braked Castors are sometimes referred to as lockable castors and it is usually swivel castors that have brakes. The Brake can lock either the wheel (Wheel Brake), the swivel head (Directional Lock), or both simultaneously (Total Stop or Swivel & Wheel Brake). It is un...common to find a fixed castor with a brake. Our GD Series of shock absorbing castors is one of the few that do. See GDS Shock Absorbing Castors here.Braked Castors can swivel the wheel 360 degrees about the vertical axis. They consist of a housing with a lockable brake and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor’s frame or bracket.
The plate fitting determines how the castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Braked Castors, like Swivel Castors, can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Braked Castor Offset
The Braked Castor’s offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason any swivelling castor will go in the direction you want it to go regardless its starting direction. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor with Brake, 125kg Capacity | Polypropylene Wheel, Plain Bore (LSV100PPBR)
£8.79100mm Top Plate Swivel and Brake Castor with White... Read More Polypropylene Wheel. It has 80x60mm fixing bolt hole centres and the load capacity of this castor is 125kg using manual propulsion at 4km/h This is one of our most popular castors and the White Polypropylene wheel is non-marking and won't damage concrete floors. Because it is a hard tread it has the lowest rolling and swivelling resistance. It is ideal as a new component or a replacement caster for most general purpose domestic or industrial castor where the travel speed of the castor generally does not exceed walking speed.
-
In Stock125mm Stainless Steel Swivel Castor With Brake, 150kg Capacity | Nylon Wheel, Plain Bore (MSS125NYBHBR)
£35.24125mm Bolt Hole Swivel Castor With Brake (Stainles... Read Mores Steel Castor) with 12mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg -
Out of Stock - On the Way250mm Swivel Castor with Brake, 1100kg Capacity | Nylon Wheel, Ball Bearing (KS250NYB1100SWB)
£174.88250mm Top Plate Swivel Castor and Swivel & Wheel B... Read Morerake (Industrial Castor) with 160x120 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 1100kg -
In Stock80mm Swivel Castor with Brake, 130kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV080RN1BSWB)
£9.8980mm Blue Elastic Rubber Tyre wheel on a nylon ... Read Morecentre with a roller bearing fitted into a pressed steel swivel & brake castor bracket. The Swivel Brake Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed)
The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a truly great performer.
-
In Stock125mm Swivel Castor with Brake, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK125PA2BBR)
£42.80125mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (Pressed Steel) with 80x60mm Fixing Bolt Hole Centres and 157mm Overall Height. Polyurethane Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 300kg. This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications.
-
In Stock75mm Swivel Castor with Brake, 90kg Capacity | Rubber Tyre Wheel, Plain Bore (361RNBR)
£12.9075mm Top Plate Swivel Castor with Footbrake (Flexe... Read Morello 61 Series) with 80x60mm Bolt Hole Centres. This castor is fitted with a Blue Elastic Rubber Tyre wheel on a Nylon Centre Wheel with a Plain Bore. Load Capacity = 90kg The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial or domestic applications. This range has a single ball bearing swivel head and finished with a bright zinc plating. -
In Stock100mm LAG Swivel Castor with Brake, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (23603FR)
£60.71100mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (LAG Pressed Steel) with a Top Plate measuring 105x80mm and 80x60mm Fixing Bolt Hole Centres. This caster has an overall height of 137mm and an offset of 37mm. The wheel is a quality Polyurethane Tyre on Cast Iron Centre Wheel with a 30mm Tread Width and Ball Bearings. Load Capacity = 300kg A Total Stop Brake means that when applied, both the wheel and swivel rotation is stopped. -
In Stock75mm Swivel Castor with Brake, 70kg Capacity | Polypropylene Wheel, Plain Bore (LSV075PPBR)
£4.7175mm white polypropylene Wheel fitted into a Top P... Read Morelate Swivel with brake Castor with 55x42mm bolt hole centres. The load capacity of this castor is 50kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a hard white polypropylene wheel that won't damage concrete floors. The hard tread lowers the rolling and swivelling resistance making this castor easier to push compared to softer treads. This castor is ideal for most domestic or industrial applications where a small yet sturdy braked castor in needed. -
In Stock100mm Swivel Castor with Brake, 225kg Capacity | Nylon Wheel, Plain Bore (TS4100NY04L)
£34.11100mm Top Plate Swivel Castor with Swivel & Wh... Read Moreeel Brake (Pressed Steel) with 105x80mm Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 225kg -
In Stock125mm Swivel Castor with Brake, 350kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KBMG125CRPCB)
£60.87125mm Swivel Castor (Fabricated Steel) with Swivel... Read More & Wheel Brake and 105x80mm Fixing Bolt Hole Centres. The wheel has a Crown Tread Polyurethane Tyred on Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 350kg Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Brake Style: Swivel & Wheel Brake (also known as a Total Stop Brake). Locks the wheel and swivel rotation when applied.
- Overall Height: 165mm
- Offset: 39mm
- Swivel Radius: 147mm
- Bearing Type: Ball Bearing
- Tread Hardness: 92 +/-3 Shore A
- Load Capacity: 350kg (manual propulsion at 4km/h)
- Crowned Polyurethane Tread for easy manoeuvrability.
-
In Stock125mm Swivel Castor with Brake, 300kg Capacity | Nylon Wheel, Ball Bearing (MSK125NY2BBR)
£25.59125mm Top Plate Swivel Castor with Brake (Pressed ... Read MoreSteel) with 80x60mm Fixing Bolt Hole Centres. Nylon Wheel with Ball Bearings. Load Capacity = 300kg. This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications. The nylon wheel is insensitive to water and will not mark or damage most flooring. -
In Stock100mm Swivel and Brake Castor, 80kg Capacity | Polypropylene Wheel, Plain Bore (LSV100PPBHBR)
£9.20100mm White Polypropylene wheel fitted in a 12m... Read Morem Single Bolt Hole Swivel & Brake Castor (Pressed Steel castor frame). This castor has a 80kg load capacity using manual propulsion at 4 km/h.
This castor is fitted with a White Polypropylene wheel that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
Out of Stock - On the Way125mm Swivel Castor with Brake, 100kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV125RMBBR)
£10.21125mm Top Plate Swivel and Brake Castor with a Bla... Read Moreck Rubber Tyre Wheel on a Pressed Steel centre complete with Thread Guards. It has 80x60mm bolt hole centres and a load capacity of 100kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. -
In Stock
80mm Stainless Steel Swivel and brake Castor, 150kg Capacity | Nylon wheel, Plain Bore (MSS080NYBHBR)
£22.1580mm Bolt Hole Swivel Stainless Steel Castor (150k... Read Moreg Load Capacity) with Swivel and Wheel Brake. Nylon (Plain Bore) Wheel with 30mm Tread Width. -
In Stock125mm Swivel and Brake Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1322070)
£10.74125mm Bolt Hole Swivel Castor and Swivel & Whe... Read Moreel brake (Pressed Steel) with 10mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg
