- Sorry, this product cannot be purchased.
Braked Castors
Braked Castors are sometimes referred to as lockable castors and it is usually swivel castors that have brakes. The Brake can lock either the wheel (Wheel Brake), the swivel head (Directional Lock), or both simultaneously (Total Stop or Swivel & Wheel Brake). It is un...common to find a fixed castor with a brake. Our GD Series of shock absorbing castors is one of the few that do. See GDS Shock Absorbing Castors here.Braked Castors can swivel the wheel 360 degrees about the vertical axis. They consist of a housing with a lockable brake and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor’s frame or bracket.
The plate fitting determines how the castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Braked Castors, like Swivel Castors, can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Braked Castor Offset
The Braked Castor’s offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason any swivelling castor will go in the direction you want it to go regardless its starting direction. Read More
- Display 15 Products per page
-
In Stock150mm Swivel Castor with Brake, 730kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TSH150PT15F)
£145.49150mm Heavy Duty Top Plate Swivel and Brake Castor... Read More (Fabricated Bracket) with 105mm x 80/75mm bolt hole centres and 202mm overall castor height. The wheel has a Revvothane Polyurethane Tyre on a Cast Iron Centre with Roller Bearing. Load Capacity = 730kg The Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm.- Use 12mm diameter bolts when fitting at 120 x 60mm
- Use 10mm diameter bolts when fitting at 105x80/75mm
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
-
In Stock100mm Swivel and Brake Castor, 80kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV100RPBHBR)
£7.76100mm Grey Rubber Tyre wheel with a polypropylene ... Read Morecentre fitted into a 12mm Single Bolt Hole Swivel with brake Castor (Pressed Steel castor frame). This castor has a 80kg load capacity using manual propulsion at 4 km/h. This castor is fitted with a grey rubber tyre that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings -
In Stock100mm Swivel Castor with Brake, 160kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV100RN2BSWB)
£13.30100mm Blue Elastic Rubber Tyre on a nylon centre w... Read Moreheel with a ball bearing fitted into a pressed steel swivel & brake castor bracket. The Swivel Brake Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 160kg using manual propulsion at 4km/h (walking speed) The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products. This castor is often used on flight cases as well as in many medical, industrial and domestic applications. -
In Stock200mm Swivel Castor with Brake, 1000kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HKB20020241)
£159.54200mm Top Plate Swivel Castor With Brake (Fabricat... Read Moreed Steel) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 1000kg -
In Stock80mm Swivel and Brake Castor, 130kg Capacity | Nylon Wheel, Roller Bearing (MSVH080NY1BSWB)
£9.0380mm Single Bolt Hole (12mm) Swivel Castor with Sw... Read Moreivel and Wheel Brake (Pressed Steel). White Nylon Wheel with Roller Bearing. Load Capacity = 130kg -
In Stock125mm Swivel Castor with Brake, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK125PC2BBR)
£70.44125mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (Pressed Steel) with 80x60mm Fixing Bolt Hole Centres and 157mm Overall Height. Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 300kg. This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications.
-
In Stock80mm Swivel and Brake Castor, 130kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH080PN1BSWB)
£9.3580mm Single Bolt Hole (12mm) Swivel Castor with Sw... Read Moreivel and Wheel Brake (Pressed Steel). Polyurethane Tyred / Nylon Centre Wheel with Roller Bearing. Load Capacity = 130kg -
Out of Stock - On the Way150mm Swivel Castor with Brake, 500kg Capacity | Polyurethane Tyre Wheel, Ball bearing, KSMG150CRPCB (KSMG150CRPCB)
£62.10150mm Swivel Castor (Fabricated Steel) with 105x80... Read Moremm Fixing Bolt Hole Centres that suit a 12mm Fixing Bolt. The wheel has a Crown Tread Polyurethane Tyre bonded to a Cast Iron Centre with Ball Bearings. Load Capacity = 500kg Crown tread wheels have a smaller point of contact with the floor which increases wheel's manoeuvrability by lowering the swivel resistance cause by friction with the floor. -
In Stock100mm Swivel and Brake Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1322788)
£13.55100mm Bolt Hole Swivel Castor and Swivel & Whe... Read Moreel brake (Pressed Steel) with 10mm Bolt Hole. Nylon Wheel with Ball Bearing. Load Capacity = 150kg -
In Stock75mm Stainless Steel Swivel Castor (BH) With Brake, 75kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKABB075TPR)
£10.93This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has a 10mm Single Bolt Hole and a total stop brake. A total stop brake brakes both the swivel head and the wheel. The load capacity of this castor is 75kg using manual propulsion at 4km/h The grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Download Series Data Sheet here -
In Stock200mm Shock Absorbing Swivel Castor With Brake, 450kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KGDSP200BSFMUD)
£87.85200mm Shock absorbing (15mm Compression) Swivel... Read More castor with Brake and Polyurethane Tyred Aluminium Wheel. Load Capacity = 450kg
For the compression performance, please see the image for the curve by clicking on the thumbnail image above. To use this curve, please calculate the weight being carried by this castor and divide that by the one less than the number of castors on your equipment, So if you have a trolley using 4 of these castors and the total weight being carried is 500kg, then the compression of the rubber pad is the reading given on the y axis at 167kg (500kg / 3 = 167kg) which is just over 10mm.
-
In Stock125mm Swivel Castor with Brake, 150kg Capacity | Rubber Tyre Wheel, Ball Bearing (1322068)
£19.40125mm Top Plate Swivel Castor and Swivel & ... Read MoreWheel Brake (Pressed Steel) with 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
-
In Stock200mm Swivel Castor with Brake, 600kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KBMG200CRPCB)
£93.32200mm Swivel Castor (Fabricated Steel) with Swivel... Read More & Wheel Brake. Crown Tread Polyurethane Tyred / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 600kg -
In Stock200mm Swivel Castor With Brake, 6000kg Capacity | Machine Cast Nylon Wheel, Ball bearing (UGXT200BSFMCQ)
Original price was: £1,387.38.£871.30Current price is: £871.30. Sale!200mm Machine Ca... Read Morest Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel and Wheel Brake Castor with a grease nipple in the swivel head. The bolt holes centres are 210x160mm bolt hole centres and the load capacity is 6,000kg. This castor is Power Towable to 4km/h This super heavy duty high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical -
In Stock50mm Swivel Castor with Brake, 50kg Capacity | Polypropylene Wheel, Plain Bore (LSM050PPBR)
£3.7750mm Swivel Castor With Total Stop Brake. 4 hole t... Read Moreop plate with 48/38x48/38mm slotted bolt hole centres to suit 6mm fixing bolts. The wheel is Black Polypropylene with Plain Bore. Load Capacity = 50kg
