- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (MSV100NY2B)
£8.75100mm White Nylon Wheel with a ball bearing fit... Read Moreted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.</p>
-
In Stock125mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV125RN2B)
£12.45125mm Blue Elastic Rubber Tyre on a nylon centr... Read Moree wheel with a ball bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 200kg using manual propulsion at 4km/h (walking speed)
The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products.</p>
-
In Stock150mm Swivel Castor, 400kg Capacity | Rubber Tyre Wheel, Roller Bearing (655RTB)
£94.21150mm Top Plate Swivel Castor. The 4 hole top p... Read Morelate measures 162mm x 140mm with 140mm x 105mm Bolt Hole Centres. to suit a 10mm Fixing Bolt. The Wheel has a Rubber Tyre on Cast Iron Centre with a needle roller bearing. Load Capacity = 400kg.
The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head.
-
In Stock50mm Black Footmaster Levelling Castor, Plate Fitting, 280kg Capacity | Nylon Wheel (KGD-60FBLACK)
£32.5650mm Foot Master Levelling Castor with a black pow... Read Moreder coating finish. This product has a 4-hole top plate with 58mm x 58mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 25mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation This product's load capacity has increased to 280kg Static Load and 140kg Dynamic Load. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock75mm Footmaster Castor with Levelling Foot, 700kg Capacity | Nylon Wheel, Ball bearing (KGDH75ASFNYD)
Original price was: £87.20.£52.60Current price is: £52.60. Sale!This 75mm Swivel Castor has Black Nylon wheel (Bal... Read Morel Bearing) with an extra long adjustable foot (GDH-75-ASF-NYD). The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear. The Threaded section of the Adjustable Foot extends a maximum of 60mm above the top of the top plate (78mm including the hex head). The Hex Head can be operated by a drill for quick operation. The overall height of the castor is 110mm and the adjustable foot can extend by up to 35mm to enable precise levelling. The load capacity is 700kg and the recommended maximum total load to be carried by 4 castors is 2,100kg. -
In Stock125mm Swivel Castor, 100kg Capacity | Polypropylene Wheel, Plain Bore (LSV125PPBH)
£8.24125mm White Polypropylene wheel fitted in a 12m... Read Morem Single Bolt Hole Swivel Castor (Pressed Steel castor frame). This castor has a 100kg load capacity using manual propulsion at 4 km/h.
This castor is fitted with a White Polypropylene wheel that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In Stock200mm Swivel Castor, 205kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV200RMB)
£21.03200mm Top Plate Swivel Castor with a Black Rubber ... Read MoreTyre Wheel on a Pressed Steel centre complete with Thread Guards. It has 105x80mm bolt hole centres, an overall height of 235mm and a load capacity of 205kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. -
In Stock200mm Swivel Castor, 6000kg Capacity | Machine Cast Nylon Wheel, Ball bearing (UGXT200ASFMCQ)
Original price was: £1,291.47.£811.07Current price is: £811.07. Sale!200mm Machine Ca... Read Morest Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with a grease nipple in the swivel head. The bolt holes centres are 210x160mm bolt hole centres and the load capacity is 6,000kg. This castor is Power Towable to 4km/h This super heavy duty high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical -
In Stock75mm Swivel Castor, 50kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV075RP)
£3.5075mm Grey Rubber Tyre Wheel on a Nylon centre fitt... Read Moreed into a Top Plate Swivel Castor with 55x42mm bolt hole centres. The load capacity of this castor is 50kg using manual propulsion at 4km/h. This popular general, light duty general purpose castor is fitted with a grey rubber tyre that is non-marking and gentle on floors. This castor is ideal for most domestic or industrial castor uses where a small yet sturdy swivel castor in needed. -
In Stock150mm AGV Swivel Castor, Twin Wheel, 630kg Load | Polyurethane Wheel, Ball bearing (GAAD150ASFHUD)
Original price was: £890.42.£344.12Current price is: £344.12. Sale!This Twin wheel ... Read More150mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The castor is unique because it has a self-aligned function enabled by two swivelling axes each with different swivelling radii so that the castor's offset can automatically alter when changing direction to optimise the castor's turning circle for the AGV. Specifically, the offset can range from 15mm to 35mm which reduces the castors 'swing' enabling it to better follow the designated path.
The Top Plate is 145mm x 145mm and has 4 bolt holes that are spaced 120mm x 120mm, each with a 11mm hole diameter,
This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. -
In Stock200mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG200PAB)
£65.35200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Aluminum Centre Wheel with Ball Bearing. Load Capacity = 600kg -
In Stock100mm Swivel Castor, 270kg Capacity | Nylon Wheel, Ball Bearing (KSMG100NYB)
£33.02100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a 4 hole top plate fitting and 105x80mm Bolt Hole Centres. This castor houses a Nylon Wheel with Ball Bearing. Load Capacity = 270kg using manual propulsion at 4km/h (walking speed), Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Offset: 35mm
- Bearing Type: Ball Bearing
- Load Capacity: 270kg (manual propulsion at 4km/h)
- Nylon castor wheels have a high load capacity at a low cost. They are maintenance free and extremely resistant to water, salts, greases, acids and alkalis
-
Out of Stock - On the Way150mm Stainless Steel Swivel Castor, 200kg Capacity | Nylon Wheel, Plain Bore (MSS150NYBH)
£36.23150mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 200kg -
Out of Stock - On the Way125mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Ball Bearing (1321118)
£16.10125mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 150kg -
In Stock160mm Swivel Castor, 800kg Capacity | Polyurethane Tyre Wheel, Ball bearing (4670FTP160P63)
£106.08160mm Top Plate Swivel Castor (Pressed Steel) With... Read More 105X80mm Bolt Hole Centres. This very heavy duty castor houses an extremely strong Polyurethane Tyre Wheel on a Cast Iron Centre Wheel With Ball Bearing. Load Capacity = 800Kg
