- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock200mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (2SH200PT2H)
£392.83200mm Twin Wheeled Swivel Castor containing two Po... Read Morelyurethane Tyred wheels on cast iron centres running on Ball Bearings. The swivel bracket has a flat top plate and has four fixing holes with 105x80mm bolt hole spacing. The maximum load capacity of this castor is 1500kg. -
In Stock125mm Swivel Castor, 250kg Capacity | Nylon Wheel, Ball Bearing (522NYBJ)
£29.09125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Bolt Hole Centres (suit an 8mm Fixing Bolt). Nylon Wheel with Ball Bearing. Load Capacity = 250kg -
In Stock125mm Swivel Castor, 100kg Capacity | Grey Rubber Tyre Wheel, Roller Bearing (MSV125GRP1B)
£8.85125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Grey Non-Marking Rubber Tyre / Plastic Centre Wheel with Roller Bearing. Load Capacity = 100kg -
In Stock100mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSCR10020241)
£37.18100mm Swivel Castor (Pressed Steel) and Crown Trea... Read Mored Polyurethane Tyred Wheel with Ball Bearing. Load Capacity = 250kg -
In StockSwivel Castor, 1000kg Capacity | 150mm Polyurethane Tyre Wheel, Ball bearing, (K2ST150PC2BD)
£454.87150mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor fitted with a directional lock to fix the swivel head in position. The swivel head turns on thrust and taper roller bearings for extra strength and the bracket is finished in black epoxy paint.
This castor has a top plate measuring 230mm x 230mm with bolt hole spacings of 190mm x 190mm drilled to 13mm diameter. The two Polyurethane Tyre on a Cast Iron Centre wheels each have ball bearings fitted to reduce the rolling resistance.
The castor has a 1000kg Load Rating at 4km/h
-
In Stock125mm Swivel Castor, 325kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (561SUB)
£53.61125mm Top Plate Swivel Castor made from Pressed St... Read Moreeel (Flexello Brand) and has a ball bearing swivel race. The Top Plate has four fixing holes to suit 10mm bolts and are slotted to 140/120mm x 105/95mm Bolt Hole Centres. The caster wheel has a Red Polyurethane Tyre on a Cast Iron Centre Wheel with with A 35mm Tread Width and a Needle Roller Bearing. Load Capacity = 325kg -
In Stock125mm Swivel Castor, 100kg Capacity | Black Rubber Tyre Wheel, Roller Bearing (MSV125BRP1B)
£7.16125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Bolt Hole Centres. Black Rubber Tyre / Plastic Centre Wheel with Roller Bearing. Load Capacity = 100kg -
In Stock260mm Fixed Castor, 120kg Capacity | Puncture Proof Wheel, Roller Bearing (KF260PPD)
£94.40260mm Puncture Proof Fixed Castor (Pressed Steel) ... Read Morewith 150x115mm Fixing Bolt Hole Centres. Diamond Tread Puncture Proof Wheel on a Red Polypropylene (Plastic) Centre with a Roller Bearing. Load Capacity = 120kg The wheel is sized 3.00-4 and made from microcellular polyurethane making it a strong Light-Medium duty wheel and though it has a 10" diameter, it is also commonly referred to as a 260mm wheel. -
In Stock100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV100RN1B)
£10.88100mm Blue Elastic Rubber Tyre on a nylon centr... Read Moree wheel with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 160kg using manual propulsion at 4km/h (walking speed)
The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products.
-
In Stock100mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Plain Bore (422PN)
£24.96100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Hole Centres. Polyurethane Tyre on a Nylon Centre Wheel with a Smooth Plain Bore. Load Capacity = 250kg.
-
In Stock80mm Low Level Swivel Castor, 700kg Capacity | Nylon Wheel, Ball bearing (KS080NYBJ700)
Original price was: £32.39.£22.68Current price is: £22.68. Sale!80mm Low Level Swivel Castor fitted with an- Top Plate Size: 100x85mm
- Bolt Hole Centres: 80/75mm x60/45mm
- Overall Height: 120mm
- Wheel Material: Cast White Nylon
- Bearing Type: Ball Bearings
- Load Capacity: 700kg
-
In Stock125mm Swivel Castor, 400kg Capacity | Polyurethane Tyre Wheel, Ball bearing, (HKS12520241)
£89.17125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 400kg -
In Stock150mm Swivel Castor, 1100kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (2HKS15020241)
£202.56150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor - Twin Wheel). The Top Plate measures 149x110mm with 105x80mm Fixing Hole Centres. A grease nipple is fitted to the swivel head to enable easy maintenance. The load capacity of this dual wheel castor is 1100kg. The Wheel has a Polyurethane Tyre (92 Shore A) on a Cast Iron Centre Wheel with Ball Bearings. The polyurethane tyre is abrasion resistant with a low rolling resistance. The elasticity of the polyurethane allows the wheel absorb some of the rolling vibrations. This provides the user with a smoother and quieter operation yet is gentler on concrete floors compared to hard treads such as Cast Iron. -
In Stock100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSV100PN1B)
£9.85100mm Red Polyurethane Tyre Wheel on a Nylon Centr... Read Moree with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed) The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications. -
In Stock60mm Compact Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS060PT2BBH)
£20.0460mm Low Level swivel castor with 12mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 35mm Tread Width and Ball bearings. Load Capacity = 150kg
