- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
Out of Stock - On the Way80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH080RN1B)
£8.0180mm Single Bolt Hole (12mm) Swivel Castor with Bl... Read Moreue Rubber Tyre Wheel / Nylon Centre and Roller Bearing. Load Capacity = 130kg -
In Stock200mm Swivel Castor, 300kg Capacity | Nylon Wheel, Roller Bearing (MSV200NY1B)
£24.84200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Hole Centres and 235mm Overall height. The White Nylon Wheel has a 50mm Tread Width and a Roller Bearing. Load Capacity = 300kg -
In Stock60mm Compact Swivel Castor, 150kg Capacity | 60mm Polyurethane Tyre Wheel, Ball bearing (KS060PT2B)
£20.2660mm Low Level swivel castor with 105x80mm Top Pla... Read Morete and 80x60mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 35mm Tread Width and Ball bearings. Load Capacity = 150kg -
In Stock200mm Swivel Castor, 1000kg Capacity | Cast Iron Wheel, Ball bearing (HKS20020441)
£89.75200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball bearing. Load Capacity = 1000kg -
In Stock100mm Swivel Castor, 340kg Capacity | Cast Iron Wheel, Roller Bearing (461CIB)
£25.33100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80mm Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 340kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
-
In Stock75mm AGV Swivel Castor, Twin Wheel, 250kg Load | Polyurethane Wheel, Ball bearing (GAAD75ASFHUD)
Original price was: £510.48.£197.30Current price is: £197.30. Sale!This Twin wheel ... Read More75mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The castor is unique because it has a self-aligned function enabled by two swivelling axes each with different swivelling radii so that the castor's offset can automatically alter when changing direction to optimise the castor's turning circle for the AGV. Specifically, the offset can range from 10mm to 30mm which reduces the castors 'swing' enabling it to better follow the designated path.
The Top Plate is 112mm x 112mm and has 4 bolt holes that are spaced 92mm x 92mm, each with a 9mm hole diameter,
This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. -
In Stock100mm Swivel Castor, 340kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (TSH100PT2H)
£103.68100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor Bracket) with 105x80mm Fixing Hole Centres. The castor houses a Polyurethane Tyre Wheel on a Cast Iron Centre with two quality Ball Bearings for extremely low rolling resistance on heavy loads. The load capacity of this 100mm castors is 340kg.
Features of the Revvo H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
-
In Stock35mm Compact Swivel Castor, 100kg Capacity | 35mm Polyurethane Tyre Wheel, Ball bearing (KS035PT2B)
£11.3635mm Low Level swivel castor with 60x60mm Top Plat... Read Moree and 48/38x48/38mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 52.5mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg -
In Stock125mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK125PC2B)
£64.00125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 300kg. This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications.
-
In Stock75mm Stainless Steel Swivel Castor, 75kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKATS075TPR)
£8.94This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has a 60x60mm 4 hole Top Plate with slotted fixing bolt holes at 48/39x48/39mm. The load capacity of this castor is 75kg using manual propulsion at 4km/h The grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Download Series Data Sheet here -
In Stock125mm AGV Swivel Castor, Twin Wheel, 440kg Load | Polyurethane Wheel, Ball bearing (GATD125ASFHUD)
Original price was: £700.30.£270.65Current price is: £270.65. Sale!This Twin wheel ... Read More125mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The Top Plate is 145mm x 145mm and has 4 bolt holes that are spaced 120mm x 120mm, each with a 11mm hole diameter. The castor is able to tilt +/- 5o from its central axis according to the flatness of the floor. This ensures that this castor's wheels keep contact with the floor allowing smooth AGV movement and protection of the loaded cargo when changing directions (See illustration below)
The wheels are more widely separated from each other than most Twin Wheel Castors. When changing direction, the two wheels spin in opposite directions to each other which reduces the castor offset. The smaller the offset the less chance that the AGV will deviate from its designated line.
This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. -
In Stock200mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (2SH200PT15)
£307.52200mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor - Twin Wheel) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1500kg -
Out of Stock - On the Way
150mm Swivel Castor, 600kg Capacity | Cast Iron Wheel, Ball bearing (HKS15020441)
£77.15150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a Cast Iron Wheel with Ball bearings. Load Capacity = 600kg using manual propulsion at 4 km/h (walking speed) Key Specifications:- Top Plate Size: 149mm x 110mm
- Bolt Hole Centres: 120/105mm x 80/60mm
- Overall Height: 202mm
- Tread Width: 45mm
-
In Stock125mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS125PNBBH)
£35.89125mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock100mm LAG Swivel Castor with Brake, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (23606)
£58.16100mm Top Plate Swivel Castor (LAG Pressed Steel... Read More) with a large Top Plate measuring 135 x 110mm and 105 x 80mm Fixing Bolt Hole Centres. This caster has an overall height of 137mm and an offset of 37mm. The wheel is a quality Polyurethane Tyre on Cast Iron Centre Wheel with a 40mm Tread Width and Ball Bearings. Load Capacity = 300kg
