- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock125mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS125PNB)
£30.57125mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock200mm Swivel Castor, 605kg Capacity | Nylon Wheel, Roller Bearing (855NYB)
£93.09200mm Top Plate Swivel Castor (Heavy Duty Pressed ... Read MoreSteel) with 140X105mm Hole Centres. This castor has a White Nylon Wheel with a Needle Roller Bearing. Load Capacity = 605kg -
In Stock75mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Plain Bore (361SU)
£23.5875mm Top Plate Swivel Castor (Pressed Steel - Flex... Read Moreello Brand). The top plate measures 105x80mm and has 80x60mm Bolt Hole Centres. The castor's overall height is 95mm and has a Polyurethane Tyre on a Cast Iron Centre castor wheel with 29mm Tread Width and Smooth Plain Bore. Load Capacity = 150kg -
In Stock100mm Stainless Steel Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS100RNBBH)
£26.29100mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock125mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK125PC2B)
£64.00125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 300kg. This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications.
-
In StockSwivel Castor, 75mm, 140kg Capacity, Nylon Wheel, Plain Bore (MSE075NY)
£7.2175mm Medium Duty Top Plate Swivel Castor. Nylon Wh... Read Moreeel and Plain Bore. Load Capacity = 140kg This castor has a 105x80mm Top Plate with 80mm x 60mm Bolt Hole Centres. The overall height is 95mm. The Nylon castor wheel is a hard tread made from quality nylon. It will not damage or mark concrete floors and is not susceptible to picking up floor debris and swarf. Nylon is a popular wheel choice because it is light weight and has a high load capacity relative to other wheel materials of the same size. It is not affected by water and is insensitive to many chemicals apart from acids. -
In Stock80mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS080NYBH)
£17.4780mm Bolt Hole Swivel Castor (Stainless Steel Cast... Read Moreor) with 12mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg -
In Stock125mm Swivel Castor, 100kg Capacity | Polypropylene Wheel, Plain Bore (LSV125PPBH)
£8.24125mm White Polypropylene wheel fitted in a 12m... Read Morem Single Bolt Hole Swivel Castor (Pressed Steel castor frame). This castor has a 100kg load capacity using manual propulsion at 4 km/h.
This castor is fitted with a White Polypropylene wheel that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In Stock80mm Swivel Castor, 130kg Capacity | Nylon Wheel, Roller Bearing (MSVH080NY1B)
£6.6480mm Single Bolt Hole (12mm) Swivel Castor with Ny... Read Morelon Wheel with Roller Bearing. Load Capacity = 130kg -
In Stock100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321780)
£7.55100mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg -
Out of Stock - On the Way125mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH125RN1B)
£12.06125mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Blue Elastic Rubber Tyre / Nylon Centred Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock75mm Swivel Castor, 70kg Capacity | Polypropylene Wheel, Plain Bore (LSV075PPBH)
£3.66This castor c... Read Moreomes with a 75mm White Polypropylene Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame). The load capacity of this castor is 70kg using manual propulsion at 4km/h
This castor is fitted with a white polypropylene wheel that will not mark or damage concrete floors and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In Stock100mm High Temperature Stainless Steel Swivel Castor, 150kg Capacity | Phenolic Wheel, Plain Bore (MSS100HT)
£30.45100mm High Temperature Top Plate Swivel Castor (St... Read Moreainless Steel Castor) with 80x60mm Bolt Hole Centres and 128mm overall height. Black Phenolic caster wheel with 35mm Tread Width and Smooth Plain Bore. Load Capacity = 150kg This castor is rated from -40 Deg. C to +280 Deg. C and is made from AISI304 Stainless Steel with a double ball race in the swivel head. -
In Stock63mm Footmaster Levelling Castor, Stem Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80S)
£48.0963mm Foot Master Levelling Castor with an M12 x 18... Read Moremm Threaded Stem finished in an ivory coloured powder coating. This product has a black Nylon Wheel with a 28mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation. This product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock125mm AGV Swivel Castor, Twin Wheel, 440kg Load | Polyurethane Wheel, Ball bearing (GAAD125ASFHUD)
Original price was: £766.17.£296.11Current price is: £296.11. Sale!This Twin wheel ... Read More125mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The castor is unique because it has a self-aligned function enabled by two swivelling axes each with different swivelling radii so that the castor's offset can automatically alter when changing direction to optimise the castor's turning circle for the AGV. Specifically, the offset can range from 15mm to 33mm which reduces the castors 'swing' enabling it to better follow the designated path. The Top Plate is 145mm x 145mm and has 4 bolt holes that are spaced 120mm x 120mm, each with a 11mm hole diameter, This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor.
