- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH100PN1B)
£8.28100mm Red Polyurethane Tyre Wheel on a Nylon Ce... Read Morentre with a roller bearing fitted into a single bolt hole pressed steel swivel castor bracket. The Swivel Bracket has 12mm single bolt hole. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.
-
In Stock50mm Footmaster Levelling Castor, Stem Fitting, 280kg Capacity | Black Nylon Wheel (KGD-60S)
£32.56M12 x 18mm Threaded Stem Fitting Foot Master Level... Read Moreling Castor with an ivory coloured powder coating finish. This product has a black Nylon Wheel with a 25mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation. This product's load capacity has increased to 280kg Static Load and 140kg Dynamic Load (GD-60-S-NYN) Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each of these castors is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock200mm Swivel Castor, 400kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSK200RN2B)
£42.48200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Blue Elastic Rubber Tyre on a Black Nylon Centre Wheel with Ball Bearings. Load Capacity = 400kg. Elastic Rubber Tyres have a soft tread and are both gentle on floors and non-marking. They are an excellent choice when a rubber tyre is needed and the weight to be carried is more than what a castor with a standard rubber tyre can hold.
-
In Stock125mm Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV125PN2B)
£16.84125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Red Polyurethane Tyre on a Grey Nylon Centre Wheel with ball bearing. Load Capacity = 200kg -
Out of Stock - On the Way75mm Swivel Castor, 80kg Capacity | Nylon Wheel, Plain Bore (2KS075PPBH)
£7.6875mm Twin Wheel Single Bolt Hole Swivel Castor (Pr... Read Moreessed Steel) with 10mm Fixing Hole and 99mm overall height. Black Polypropylene Wheel with Plain Bore and a Load Capacity of 80kg -
In Stock75mm AGV Swivel Castor, 100kg Capacity | Polyurethane Wheel, Ball bearing (GAPL75ASFHUD)
Original price was: £66.49.£25.70Current price is: £25.70. Sale!75mm Automate... Read Mored Guided Vehicle (AGV) Castor has a bracket made from strong pressed steel with precision ball bearings in the swivel head for smooth swivelling action and durability. The load capacity of this castor is 100kg
The bolt holes are slotted to 78mm x 45mm / 72mm x 45mm with a 9mm hole diameter,
This castors is fitted a Polyurethane tyre (Shore A 90) on an Aluminium centre containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor.
Many AGV applications require the castor to run 24 hours a day and the durability of the castor is important to reduce costs associated with stoppage. By using bearing steel with a higher strength than general steel in the swivel head, this castor has an exceptional performance.
-
In Stock50mm Swivel Castor, 27kg Capacity | Rubber Tyre Wheel, Plain Bore (961RN)
£5.2850mm Top Plate Swivel Castor (Pressed Steel) with ... Read More54x25mm Fixing Bolt Hole Centres and 64mm Overall Height. The wheel is a Blue Rubber Tyre on a Black Nylon Centre Wheel with a Smooth Plain Bore and a 22mm Tread Width. Load Capacity = 27kg. The blue rubber tyre wheel has a soft tread and is both gentle on floors and non-marking. It also absorbs fine vibrations whilst moving which provides user comfort and limits noise. -
In Stock150mm Swivel Castor, 1020kg Capacity | Cast Iron Wheel, Plain Bore (655CI)
£82.79150mm Top Plate Swivel Castor. The 4 hole top p... Read Morelate measures 162mm x 140mm with 140mm x 105mm Bolt Hole Centres. to suit a 10mm Fixing Bolt. The Wheel is a solid Cast Iron with a smooth plain bore. Load Capacity = 1020kg.
The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head.
-
In Stock50mm Low Level Swivel Castor, 160kg Capacity | Polyurethane Tyre Wheel, Plain Bore (2SL050PT0L)
Original price was: £26.21.£24.59Current price is: £24.59. Sale!50mm Low Level Twin Wheel Swivel Castor (REVVO Bra... Read Morend). The Polyurethane tyre wheels have a tread width of 14mm each and turn on a smooth Plain Bore. The Load Capacity of 160kg. This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation. This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes)
-
In Stock50mm Low Level Swivel Castor, 160kg Capacity | Nylon Wheel, Plain Bore (MSTW050NY)
Original price was: £14.20.£9.94Current price is: £9.94. Sale!50mm Twin Wheel Swivel Castor with Round Top Plate... Read More (Keystone) with a 64mm overall height and 160kg load rating. The Nylon Wheels have a tread width of 14mm each and with a smooth Plain Bore. The round top plate has a diameter of 95mm and 4 fixing holes to suit 6mm bolts. Each fixing hole is spaced 51mm from the fixing hole diagonally opposite (the largest distance between the fixing holes) This castor offers an exceptional load capacity in relation to its low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.
-
Out of Stock - On the Way150mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (661PNB)
£49.78150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 600kg -
In Stock
150mm Swivel Castor, 1020kg Capacity | Cast Iron Wheel, Roller Bearing (655CIB)
£87.69150mm Top Plate Swivel Castor. The 4 hole top p... Read Morelate measures 162mm x 140mm with 140mm x 105mm Bolt Hole Centres. to suit a 10mm Fixing Bolt. The wheel is a solid Cast Iron with a needle roller bearing. Load Capacity = 1020kg.
The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head.
-
In Stock
63mm Swivel Castor, 60kg Capacity | 63mm Rubber Tyre Wheel, Plain Bore (261RN)
£8.8063mm Swivel Castor (Pressed Steel) with 4-hole top... Read More plate and 76x44.5mm Fixing Bolt Hole Centres and an overall height of 81mm. The wheel has a Blue Elastic Rubber Tyre with a black Nylon Centre, 25mm Tread Width and a smooth Plain Bore. Load Capacity = 60kg. Elastic Blue Rubber tyres are stronger than standard natural rubber. It has a soft tread and is both gentle on floors and non-marking while absorbing fine vibrations when moving which provides user comfort and limits noise. -
In Stock100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSMG100CRPCB)
£42.61100mm Swivel Castor (Fabricated Steel) with 4 hole... Read More top plate and 105X80mm bolt hole centres. This castor comes with a Crown Tread Polyurethane Tyre on a cast iron centre wheel complete with Ball Bearing. Load Capacity = 300kg using manual propulsion at 4km/h (walking speed). Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Offset: 35mm
- Tread Hardness: 92 +/-3 Shore A
- Bearing Type: Ball Bearing
- Load Capacity: 300kg (manual propulsion at 4km/h)
- Crowned Tread for easy manoeuvrability
-
In StockSwivel Castor (Twin Wheel), 200mm, 2000kg Capacity, Polyurethane Tyre Wheel, Ball Bearing, (K2ST200PC2BD)
£619.41200mm Twin Wheel Extra Heavy Duty Fabricated Swive... Read Morel Castor with A Directional Lock Fitted To Fix The Swivel Head Into Position. The Swivel Head Turns On Thrust and Taper Roller Bearings For Extra Strength and The Bracket Is Finished In Black Epoxy Paint. This Castor Has A Top Plate Measuring 230mm X 230mm with Bolt Hole Spacings Of 190mm X 190mm Drilled To 17mm Diameter. The Two Polyurethane Tyre on a Cast Iron Centre Wheels Each Have Ball Bearings Fitted To Reduce The Rolling Resistance. The Castor Has A 2000kg Load Rating At 4Km/H
