- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor, 300kg Capacity | Nylon Wheel, Ball bearing (MSK100NY2B)
£17.60100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 300kg -
In Stock60mm Compact Swivel Brake Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS060PT2BBHBR)
£22.0560mm Low Level swivel with brake castor and 12mm S... Read Moreingle Bolt Hole Fixing. This Low Level compact castor has an overall height of 80mm and an Orange Polyurethane Wheel on a steel centre with a 35mm Tread Width and Ball bearings. Load Capacity = 150kg -
In Stock200mm Swivel Castor, 1000kg Capacity | Cast Iron Wheel, Ball bearing (HKS20020441)
£89.75200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball bearing. Load Capacity = 1000kg -
In Stock75mm Swivel Castor, 170kg Capacity | Nylon Wheel, Plain Bore (361NYST)
£14.0675mm Stem Fitting Swivel Castor (Flexello Pressed ... Read MoreSteel) with M12x25mm Threaded Stem. The castor houses a white Nylon Wheel with Plain Bore. Load Capacity = 170kg. The Nylon castor wheel is a hard tread made from quality nylon. It will not damage or mark concrete floors and is not susceptible to picking up floor debris and swarf. Nylon is a popular wheel choice because it is light weight and has a high load capacity relative to other wheel materials of the same size. It is not affected by water and is insensitive to many chemicals apart from acids. -
In Stock200mm Swivel Castor, 605kg Capacity | Nylon Wheel, Roller Bearing (855NYB)
£93.09200mm Top Plate Swivel Castor (Heavy Duty Pressed ... Read MoreSteel) with 140X105mm Hole Centres. This castor has a White Nylon Wheel with a Needle Roller Bearing. Load Capacity = 605kg -
In Stock150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Plain Bore (661RN)
£41.06150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 300kg -
In Stock200mm Swivel Castor, 800kg Capacity, Nylon Wheel, Ball Bearing (KS200NYBJ800)
£81.48200mm Swivel Castor (Heavy Duty Pressed Steel) wit... Read Moreh a 135mm x 110mm Top Plate and 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon with two shielded ball bearings. Load Capacity = 800kg- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- Being a hard tread it offers the lowest rolling resistance and easiest mobility.
- This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors
- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
-
In StockSwivel Castor (Twin Wheel), 300mm, 4000kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST300PC2B)
£770.74300mm Twin Wheel Extra Heavy Duty Swivel Castor. T... Read Morehe Castor Comes with 2 Heavy Duty Wheels with Polyurethane Tyres on a Cast Iron Centre. Each wheel runs on quality ball bearings. The load rating of this product is 4,000kg. -
In Stock200mm Swivel Castor, 250kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH200RN1B)
£30.89200mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Blue Rubber Tyred / Nylon Centred Wheel with Roller Bearing. Load Capacity = 250kg -
In Stock110mm AGV Swivel Castor, 400kg Capacity | 110mm Polyurethane Wheel, Ball bearing (GSAD110ASF)
Original price was: £866.95.£335.06Current price is: £335.06. Sale!110mm Automated ... Read MoreGuided Vehicle (AGV) Castor with a dual swivel head fitted with double precision ball bearings to optimise heavy loads. This provides a self-aligning function with two swivelling axes (axis) with different swivelling radii so that the castor aligns on its own according to the moving direction which reduces the turning circle of the castor. The load capacity of this castor is 400kg The AGV castor comes with twin polyurethane tyre wheels fitted with precision ball bearings which are fitted to a strong welded steel frame that is powder coated with a bolted wheel axle. -
In Stock125mm AGV Swivel Castor, Twin Wheel, 440kg Capacity | Polyurethane Wheel, Ball bearing (GASD125ASFHUD)
Original price was: £700.30.£270.65Current price is: £270.65. Sale!This Twin wheel ... Read MoreAutomated Guided Vehicle (AGV) Castor with 125m diameter wheels has a shock absorbing function and a bracket made from strong Forged steel that is zinc plated. There is double thrust bearing in the swivel head to achieve a high load capacity and maintain castor performance and durability. The role of the spring in an AGV castor is different to that of a standard shock absorbing castor. In a standard shock absorbing castor, the spring absorbs shock and noise whereas, it's role in a AGV castor is primarily to keep the wheels in contact with the floor. When determining the overall height requirement of a shock absorbing AVG, it should be designed based on the spring cushion being fully compressed. The shock absorbing pad made from a special rubber compound absorbs minor shocks and vibrations to protect the AGV unit. There is a 10mm range of compression which helps prevent the castors from losing contact with the floor which may be caused by small floor imperfections. An AGV's castor leaving the floor when changing directions is often the cause of the AGV becoming unbalanced and coming to a stop by straying off its designated path. The Top Plate is 145mm x 145mm and has 4 bolt holes that are spaced 120mm x 120mm, each with a 11mm hole diameter This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, Having a twin wheel castor is great for reducing the effort required to swivel the castor and most efficient by reducing the amount of room the castor needs to turn the AGV Cart. The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. -
In Stock125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Roller Bearing (KS125RNB180)
£43.98125mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 180kg -
In Stock200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (822PNB)
£59.07200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 500kg -
In Stock
125mm Swivel Castor, 500kg Capacity | Cast Iron Wheel, Ball bearing (HKS12520441)
£69.55125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball bearing. Load Capacity = 500kg -
In Stock125mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (522SUB)
£47.77125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 250kg
