- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock75mm Swivel Castor, 170kg Capacity | Nylon Wheel, Plain Bore (361NY)
£7.0975mm Top Plate Swivel Castor (Pressed Steel) with ... Read Morea top plate measuring 105x80mm with 8mm slotted fixing holes with 80/86mm x 60mm Bolt Hole centres. The castor houses a white Nylon Wheel with Plain Bore. Load Capacity = 170kg. The Nylon castor wheel is a hard tread made from quality nylon. It will not damage or mark concrete floors and is not susceptible to picking up floor debris and swarf. Nylon is a popular wheel choice because it is light weight and has a high load capacity relative to other wheel materials of the same size. It is not affected by water and is insensitive to many chemicals apart from acids. -
In Stock75mm Swivel Castor, 170kg Capacity | Cast Iron Wheel, Plain Bore (361CI)
£11.8075mm Top Plate Swivel Castor (Flexello 61 Serie... Read Mores) with 80x60mm Hole Centres. Cast Iron Wheel with Plain Bore. Load Capacity = 170kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating.
-
In Stock50mm Compact Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS050PT2BBH)
£14.5950mm Low Level swivel castor with 12mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 70mm and an Orange Polyurethane Wheel on a steel centre with a 33mm Tread Width and Ball bearings. Load Capacity = 150kg -
In Stock200mm Swivel Castor, 400kg Capacity | Black Rubber Tyre Wheel, Ball bearing (MSK200EA2B)
£46.13200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Hole Centres. Black Elastic Rubber Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 400kg. Elastic Rubber Tyres have a soft tread and are gentle on floors. They are an excellent choice when a rubber tyre is needed and the weight to be carried is more than what a castor with a standard rubber tyre can hold.
-
In Stock100mm Swivel Castor, 75kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV100GRP1B)
£6.66100mm Grey Rubber Tyre wheel on a plastic centr... Read Moree with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 75kg using manual propulsion at 4km/h (walking speed)
The Grey Rubber Tyre is a softer wheel compared to hard tread wheels like nylon and the rubber absorbs vibrations whilst in motion making this a low noise option and will not mark or scratch the floor. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castor a great choice for many industrial or domestic applications.
-
In Stock150mm Swivel Castor, 700kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HKS15020241)
£102.45150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 700kg -
In Stock125mm Stainless Steel Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS125RNBBH)
£38.43125mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock100mm Swivel Castor, 250kg Capacity | Nylon Wheel, Plain Bore (422NY)
Original price was: £15.92.£13.16Current price is: £13.16. Sale!100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Bolt Hole Centres and 128mm Overall Height. The Nylon Wheel has a Plain Bore and 32mm Tread Width. Load Capacity = 250kg Nylon is a high quality, low maintenance, impact resistant wheel that has a high load capacity. The nylon material is extremely resistant to salts, greases, acids and alkalis and will not mark or damage concrete floors. This makes Nylon probably the most castor wheel material.
-
In Stock150mm Swivel Castor, 600kg Capacity | Nylon Wheel, Ball bearing (HKS15020111)
£101.63150mm Top Plate Swivel Castor (Fabricated Steel Br... Read Moreacket) with 105x80mm Bolt Hole Centres. Solid White Nylon Wheel with Ball bearing. Load Capacity = 600kg -
In Stock75mm Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100F-105X80)
Original price was: £57.04.£53.50Current price is: £53.50. Sale!75mm Foot Master Levelling Castor with an Ivory Co... Read Morelour powder coating finish. This product has a 4-hole top plate with 105mm x 80mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation This product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load (GD-100F-NYN-PEU) Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock
80mm Swivel Castor, 70kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV080GRP1B)
£6.3680mm Grey Rubber Tyre wheel on a plastic centre... Read More with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 70kg using manual propulsion at 4km/h (walking speed)
The Grey Rubber Tyre is a softer wheel compared to hard tread wheels like nylon and the rubber absorbs vibrations whilst in motion making this a low noise option and will not mark or scratch the floor. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castor a great choice for many industrial or domestic applications.
-
In Stock200mm Swivel Castor, 600kg Capacity | Cast Iron Wheel, Ball Bearing (KSMG200CIB)
£57.34200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball Bearing. Load Capacity = 600kg -
In Stock125mm Swivel Castor, 100kg Capacity | Thermoplastic Rubber Wheel, Ball Bearing (KATS125TPR)
£7.87Keystone Appa... Read Moreratus / Institutional Castor with 125mm Grey Thermoplastic Wheel fitted into a Pressed Steel Top Plate Swivel Castor with slotted bolt hole centres measuring 61.5/56 x 51.5/46.5 mm. The load capacity of this castor is 100kg using manual propulsion at 4km/h
Running on a quality ball bearing the wheel offers excellent rolling performance. This popular apparatus castor is a great choice for a wide range of industrial and domestic applications such as trolley and garment rails, medical devices and hospitality equipment. Fitted with a grey thermoplastic wheel on a polypropylene centre this wheel is non-marking and gentle on floors and has a large plastic thread guard to protect the ball bearing from dirt ingress
-
Out of Stock - On the Way60mm Low Level Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS060PTB200)
£54.6560mm Low Level Swivel Castor with 80x60mm Hole Cen... Read Moretres. Polyurethane Wheel with Ball bearing. Load Capacity = 200kg -
In Stock125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1321028)
£10.58125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
