- You cannot add that amount to the basket — we have 1 in stock and you already have 1 in your basket. View basket
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock50mm Compact Swivel Castor, 150kg Capacity | 50mm Polyurethane Tyre Wheel, Ball bearing (KS050PT2B)
£15.6550mm Low Level swivel castor with 90x66mm Top Plat... Read Moree and 75/61x51/45mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 73mm and an Orange Polyurethane Wheel on a steel centre with a 33mm Tread Width and Ball bearings. Load Capacity = 150kg -
In Stock75mm Stainless Steel Swivel Castor (BH), 75kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKABS075TPR)
£9.34This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has a 10mm Single Bolt Hole. The load capacity of this castor is 75kg using manual propulsion at 4km/h The grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Download Series Data Sheet here -
In Stock160mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSZH160PN1B)
£24.27160mm Single Bolt Hole (16mm) Swivel Castor (Press... Read Moreed Steel). The wheel has a Red Polyurethane Tyre (Shore A 92) on a White Nylon Centre with a Roller Bearing. The Load Capacity is 300kg using manual propulsion at 4km/h (walking speed). Key Specifications:- Bolt Hole Size: 16mm (To reduce the bolt hole to suit a 12mm fixing bolt, a reducing washer can be used. Click here for the ACZ600.)
- Overall Height: 185mm
- Tread Width: 40mm
- Bearing Type: Roller Bearing
- Swivel Radius: 140mm
- Tyre Hardness: Shore A 92
- Key Features:
- High Load Capacity
- Low Rolling Resistance
- High Wear Resistance
- Reduce Vibration
- Low noise Operation
-
In Stock160mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV160RMB)
£13.52160mm Top Plate Swivel Castor with a Black Rubber ... Read MoreTyre Wheel on a Pressed Steel centre complete with Thread Guards. It has 105x80mm bolt hole centres and a load capacity of 160kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. -
In Stock80mm High Temperature Swivel Castor, 100kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX080HTBH)
£19.6880mm Single Bolt Hole Swivel Castor (Pressed Steel... Read More) with High Temperature Phenolic Wheel (Plain Bore) - Rated to +280 degrees C. Load capacity = 100kg -
In Stock125mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV125RN1B)
£13.13125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg -
In Stock125mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS125PNB)
£30.57125mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock100mm Swivel Castor with 24mm to 27mm Round Expander Fitting, 80kg Capacity | Rubber Tyre Wheel (194557)
£13.49100mm Grey Therm... Read Moreoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) complete with a 24mm - 27mm Round Expander. The swivel head has a double ball race and the load capacity of this castor is 80kg using manual propulsion at 4km/h. The expander fitting is designed to fit into an round hollow tube with an internal diameter of 24mm to 27mm. This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance. -
In Stock125mm Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSV125PN1B)
£15.31125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg -
In Stock125mm Swivel Castor, 350kg Capacity | Cast Iron Wheel, Ball Bearing (KSMG125CIB)
£36.41125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Fixing Bolt Hole Centres. Cast Iron Wheel with Ball Bearings. Load Capacity = 350kg Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Bearing Type: Ball Bearing
- Load Capacity: 350kg (manual propulsion at 4km/h)
- Cast iron castor wheels have a very hard tread making them the easiest of wheels to move (low tractive resistance). They have a very high load capacity, extremely wear resistant and not affected by swarf or aggressive materials.
-
In Stock
200mm Swivel Castor, 350kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV200PN2B)
£36.66200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 350kg -
In Stock100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSVH100NY1B)
£6.57100mm White Nylon Wheel with a roller bearing f... Read Moreitted into a pressed steel single bolt hole swivel castor bracket. The Swivel Bracket has a 12mm Single Bolt Hole top plate. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel has a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. Together with the strength of nylon and because it wont damage concrete floors, this makes nylon wheel castors probably the most popular choice. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.
-
In Stock50mm Low Level Swivel Castor, 160kg Capacity | Polyurethane Tyre Wheel, Plain Bore (2SL050PT0L)
Original price was: £26.21.£24.59Current price is: £24.59. Sale!50mm Low Level Twin Wheel Swivel Castor (REVVO Bra... Read Morend). The Polyurethane tyre wheels have a tread width of 14mm each and turn on a smooth Plain Bore. The Load Capacity of 160kg. This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation. This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes)
-
In Stock125mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSK125PN1B)
£16.30125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Hole Centres and 157mm Overall Height. Polyurethane Tyre caster wheel with a nylon Centre Wheel and 34mm Tread Width with Roller Bearing. Load Capacity = 250kg. This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications.
-
In Stock160mm Swivel Castor, 135kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV160BRP1B)
£16.16160mm Top Plate Swivel Castor. The castor wheel ha... Read Mores a Black Rubber Tyre on a Black Polypropylene (Plastic) Centre Wheel with Roller Bearing. The Load Capacity is 135kg using manual propulsion at 4km/h. Key Specifications:- Plate Size: 135X110mm
- Bolt Hole Centres: 105x80/75mm
- Bolt Hole Size: 11mm (suits 10mm fixing bolts)
- Overall height: 196mm
- Offset: 55mm
- Swivel Radius: 135mm
- Bearing Type: Roller Bearing
