- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock75mm Black Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100FBLACK)
£62.7575mm Foot Master Levelling Castor with an Black po... Read Morewder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation This product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load (GD-100-F-NYN-BLK) Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV080RN2B)
£8.9880mm Blue Elastic Rubber Tyre wheel on a nylon cen... Read Moretre with a ball bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed) The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors. The rubber absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castors a truly great performer.</p> -
Out of Stock - On the Way125mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Ball Bearing (1321118)
£16.10125mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 150kg -
In Stock35mm Compact Braked Castor, 100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS035PT2BBHBR)
£11.7835mm Low Level swivel with brake castor with 10mm ... Read MoreSingle Bolt Hole Fixing. This Low Level compact castor has an overall height of 50mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg -
In Stock40mm Swivel Castor, 16kg Capacity | Rubber Tyre Wheel, Plain Bore (KS040RP)
£2.2340mm Grey Rub... Read Moreber Tyre Wheel on a nylon centre fitted into a Top Plate Swivel Castor with 36x36mm bolt hole centres. The load capacity of this castor is 16kg using manual propulsion at 4km/h
This popular general, light duty purpose castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most domestic and industrial castor uses where a small yet sturdy castor in needed.
-
In Stock200mm Swivel Castor, 500kg Capacity | Nylon Wheel, Ball Bearing (MSK200NY2B)
£36.34200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. White Nylon Wheel with Ball Bearings. Load Capacity = 500kg.
-
Out of Stock - On the Way150mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSCR15020241)
£58.95150mm Swivel Castor (Pressed Steel) and Crown Trea... Read Mored Polyurethane Tyred / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg -
In Stock150mm Swivel Castor, 1100kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (2HKS15020241)
£202.56150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor - Twin Wheel). The Top Plate measures 149x110mm with 105x80mm Fixing Hole Centres. A grease nipple is fitted to the swivel head to enable easy maintenance. The load capacity of this dual wheel castor is 1100kg. The Wheel has a Polyurethane Tyre (92 Shore A) on a Cast Iron Centre Wheel with Ball Bearings. The polyurethane tyre is abrasion resistant with a low rolling resistance. The elasticity of the polyurethane allows the wheel absorb some of the rolling vibrations. This provides the user with a smoother and quieter operation yet is gentler on concrete floors compared to hard treads such as Cast Iron. -
In Stock100mm Swivel Castor, 340kg Capacity | Cast Iron Wheel, Plain Bore (461CI)
£24.40100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80 Hole Centres. Cast Iron Wheel with Plain Bore. Load Capacity = 340kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
-
In Stock100mm Swivel Castor, 225kg Capacity | Nylon Wheel, Roller Bearing (TS4100NY14)
£22.34100mm Swivel Castor (REVVO Brand) with a White Nyl... Read Moreon Wheel. The top plate measures 135mm x 110mm and the Fixing Bolt Hole Centres are 105x80mm. The castor wheel has a 35mm Tread Width with a Needle Roller Bearing and the Load Capacity is 225kg using manual propulsion at 4km/h (walking speed). The white nylon wheel is a hard tread which provides the lowest rolling resistance and maximum mobility. Being nylon the wheel is non-marking and will not damage concrete floors.
-
In Stock50mm Stainless Steel Swivel Castor (BH), 50kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKABS050TPR)
£7.59This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 50mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has a 10mm Single Bolt Hole. The load capacity of this castor is 50kg using manual propulsion at 4km/h The grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Download Series Data Sheet here -
In Stock125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Single Ball Bearing (MSVH125NY2B)
£12.53125mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has a Nylon Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. -
In Stock150mm AGV Swivel Castor ,Twin Wheel, 630kg Load | Polyurethane Wheel, Ball bearing (GATD150ASFHUD)
Original price was: £828.35.£320.14Current price is: £320.14. Sale!This Twin wheel ... Read More150mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The Top Plate is 145mm x 145mm and has 4 bolt holes that are spaced 120mm x 120mm, each with a 11mm hole diameter. The castor is able to tilt +/- 5o from its central axis according to the flatness of the floor. This ensures that this castor's wheels keep contact with the floor allowing smooth AGV movement and protection of the loaded cargo when changing directions (See illustration below)
The wheels are more widely separated from each other than most Twin Wheel Castors. When changing direction, the two wheels spin in opposite directions to each other which reduces the castor offset. The smaller the offset the less chance that the AGV will deviate from its designated line.
This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. -
In Stock50mm Footmaster Levelling Castor, Plate Fitting, 280kg Capacity | Nylon Wheel (KGD-60F-80×60)
£32.5650mm Foot Master Levelling Castor with a black pow... Read Moreder coating finish. This product has a 4-hole top plate with European Size Top Plate Fitting with 80x60mm Bolt Hole Centres. The top plate is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 25mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation This product's load capacity has increased to 280kg Static Load and 140kg Dynamic Load (GD-60-F-NYN-80x60) Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock200mm Swivel Castor, 400kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG200EAB)
£43.29200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Black Rubber Tyre / Aluminium Centre Wheel with Ball Bearing. Load Capacity = 400kg
