- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor, 80kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV100RPBH)
£6.10100mm Grey Rubber Tyre wheel with a polypropyle... Read Morene centre fitted into a 12mm Single Bolt Hole Swivel Castor (Pressed Steel castor frame). This castor has a 80kg load capacity using manual propulsion at 4 km/h.
This castor is fitted with a grey rubber tyre that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In Stock100mm Swivel Castor, 225kg Capacity | Polyurethane Tyre Wheel, Plain Bore (TS4100PT04)
£36.95100mm Top Plate Swivel Castor (Pressed Steel). Wit... Read Moreh a top plate of 135x110mm and 105x80mm bolt hole centres, this castor has a larger top plate than most 100mm castors. The wheel is a Revvo 100PT14 which is a Polyurethane Tyre on a Cast Iron Wheel with smooth Plain Bore. Load Capacity = 225Kg -
In Stock200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK200PN2B)
£48.52200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Polyurethane Tyre on a Nylon Centre Wheel with Ball Bearings. Load Capacity = 500kg.
-
In Stock100mm Heavy Duty Swivel Castor, 500kg Capacity | White Nylon Wheel, Ball Bearing (HSV100NY2B)
£27.06This 100mm heavy-duty swivel castor is designed fo... Read Morer demanding applications in both industrial and domestic settings. Featuring a top plate made from heavy gauge pressed steel, it offers exceptional durability and strength. The swivel head includes a double ball race with a hardened ball race track, ensuring smooth and reliable movement. Key Features:- Load Capacity: Supports up to 500kg, making it ideal for heavy loads.
- Top Plate Dimensions: Measures 105x80mm, with fixing bolt hole centres at 80x60mm. The slotted bolt holes (80/75×60/55mm) accommodate 8mm bolts for easy installation.
- Wheel Material: The castor features a white nylon (polyamide) wheel with a 37mm tread width, designed to provide non-marking performance.
- Precision Bearings: Fitted with two precision ball bearings, this castor offers the lowest rolling and swivel resistance in its class, ensuring effortless movement even under heavy loads.
-
In Stock50mm Compact Swivel Brake Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS050PT2BBHBR)
£16.9450mm Low Level swivel with brake castor and 12mm S... Read Moreingle Bolt Hole Fixing. This Low Level compact castor has an overall height of 70mm and an Orange Polyurethane Wheel on a steel centre with a 33mm Tread Width and Ball bearings. Load Capacity = 150kg -
In StockSwivel Castor (Twin Wheel), 250mm, 2800kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST250PC2B)
£614.98250mm Twin Wheel Extra Heavy Duty Fabricated Swive... Read Morel Castor. The Swivel Head Turns On Thrust and Taper Roller Bearings For Extra Strength and The Bracket Is Finished In Black Epoxy Paint. This Castor Has A Top Plate Measuring 250mm X 250mm with Bolt Hole Spacings Of 190mm X 190mm Drilled To 19mm Diameter. The Two Polyurethane Tyre on a Cast Iron Centre Wheels Each Have Ball Bearings Fitted To Reduce The Rolling Resistance. The Castor Has A 2800kg Load Rating At 4Km/H -
In Stock125mm Swivel Castor, 170kg Capacity | Rubber Tyre Wheel, Roller Bearing (KS125UERBLACK)
£16.44125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80X60mm Hole Centres.Black Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 170kg -
In Stock125mm Swivel Castor, 400kg Capacity| Nylon Wheel, Ball Bearing (KS125NYBJ400)
£41.00125mm Swivel Castor (Heavy Duty Pressed Steel) wit... Read Moreh a 135mm x 110mm Top Plate with 105x80mm Fixing Hole spacings. The castor wheel is a Solid White Nylon Castor Wheel with two ball bearings. Load Capacity = 400kg -
In Stock125mm Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSV125PN1B)
£15.31125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg -
In Stock125mm Stainless Steel Swivel Castor, 600kg Capacity | Nylon Wheel, Plain Bore (33661)
£135.78125mm Heavy Duty Top Plate Swivel Castor and nylon... Read More wheel with a 600kg load capacity. The top plate and frames are made from AISI 304 Stainless Steel Castor and the Stainless Steel balls from AISI 420. This castor has a 172mm overall height. Upgrade your equipment with our 125mm Heavy Duty Stainless Steel Swivel Castor, designed for superior performance in demanding environments. Ideal for both industrial and domestic applications, this castor is built to resist corrosion and heavy use. The swivel head includes a double ball race with a hardened ball race track, ensuring smooth and reliable movement. Key Features:- Load Capacity: Supports up to 600kg, making it ideal for heavy loads.
- Top Plate Dimensions: Measures 135x110mm, with fixing bolt hole centres at 105x80mm and accommodates 12mm bolts for easy installation.
- Wheel Material: The castor features a white nylon (polyamide) wheel with a 45mm tread width, designed to provide non-marking performance.
-
In Stock63mm Swivel Castor, 122kg Capacity | 63mm Nylon Wheel, Plain Bore (261NY)
£6.2163mm Top Plate Swivel Castor (Pressed Steel) with ... Read More76x44.5mm Bolt Hole Centres and 81mm Overall Height. White Nylon caster wheel with 22mm Tread Width and Smooth Plain Bore. Load Capacity = 122kg -
In Stock125mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Single Ball Bearing (MSVH125PN2B)
£14.70125mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has a Polyurethane Tyred Wheel on a Nylon Centred Wheel with a single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. -
In Stock125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSVH125NY1B)
£9.43125mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Nylon Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock125mm Swivel Castor, 1100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (GXT125ASFHUD)
Original price was: £443.94.£278.80Current price is: £278.80. Sale!125mm Polyure... Read Morethane tyre Wheel with an aluminium centre fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes cover the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1100kg at 4km/h
This high performance castor is fitted with a quality polyurethane tyre wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
-
In Stock
125mm Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV125PN2B)
£13.05125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 200kg
