- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock200mm Swivel Castor, 1150kg Capacity | Cast Iron Wheel, Roller Bearing (TSH200CI15)
£102.71200mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Fixing Bolt Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 1150kg. The Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm.- Use 12mm diameter bolts when fitting at 120 x 60mm
- Use 10mm diameter bolts when fitting at 105x80/75mm
- The Genuine Revvo H Series castor is made from heavy gauge forged steel
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
-
In Stock200mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (2SH200PT15)
£307.52200mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor - Twin Wheel) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1500kg -
In Stock125mm Swivel Castor, 250kg Capacity | Rubber Tyre Wheel, Ball Bearing, (KSMG125EAB)
£38.31125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith with 105x80mm Fixing Bolt Hole Centres. This castor is fitted with a Black Elastic Rubber Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 250kg using manual propulsion at 4km/h (walking speed). Key Specifications & Features- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Bearing Type: Ball Bearing
- Load Capacity: 250kg (manual propulsion at 4km/h)
- Elastic rubber tyre castor wheels have a higher load capacity and lower rolling resistance (easier to get moving) than normal rubber tyre. They have a high resistance to wear and offer excellent running and operating comfort.
-
In Stock150mm AGV Swivel Castor, Twin Wheel, 630kg Capacity | Polyurethane Wheel, Ball bearing (GASD150ASFHUD)
Original price was: £828.35.£320.14Current price is: £320.14. Sale!This Twin wheel ... Read MoreAutomated Guided Vehicle (AGV) Castor with 150m diameter wheels has shock absorbing function and a bracket made from strong Forged steel that is zinc plated. There is double thrust bearing in the swivel head to achieve a high load capacity and maintain castor performance and durability. The role of the spring in an AGV castor is different to that of a standard shock absorbing castor. In a standard shock absorbing castor, the spring absorbs shock and noise whereas, it's role in a AGV castor is primarily to keep the wheels in contact with the floor. When determining the overall height requirement of a shock absorbing AVG, it should be designed based on the spring cushion being fully compressed. The shock absorbing pad made from a special rubber compound absorbs minor shocks and vibrations to protect the AGV unit. There is a 10mm range of compression which helps prevent the castors from losing contact with the floor which may be caused by small floor imperfections. An AGV's castor leaving the floor when changing directions is often the cause of the AGV becoming unbalanced and coming to a stop by straying off its designated path. The Top Plate is 145mm x 145mm and has 4 bolt holes that are spaced 120mm x 120mm, each with a 11mm hole diameter This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, Having a twin wheel castor is great for reducing the effort required to swivel the castor and most efficient by reducing the amount of room the castor needs to turn the AGV Cart. The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. -
In Stock100mm Swivel Castor, 340kg Capacity | Cast Iron Wheel, Roller Bearing (461CIB)
£25.33100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80mm Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 340kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
-
In Stock125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321010)
£8.75125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
-
In Stock100mm High Temperature Swivel Castor, 120kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX100HT)
£17.99100mm Swivel Castor (Pressed Steel) with 80x60mm B... Read Moreolt Hole centres and 128mm Overall Height. This castor houses a High Temperature Black Phenolic Wheel with a 35mm Tread Width and Smooth Plain Bore. It is Rated to +280 degrees C and has a Load Capacity = 120kg -
In Stock100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH100RN1B)
£9.53100mm Blue Elastic Rubber Tyre wheel on a nylon... Read More centre with a roller bearing fitted into a pressed steel single bolt hole swivel castor bracket to suit a 12mm bolt. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a truly great performer.
-
In Stock200mm Swivel Castor, 350kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV200RN2B)
£36.57200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel with ball bearings. Load Capacity = 350kg Blue elastic rubber tyres are gentle on floors and non-marking. They are a popular choice when a castor with a rubber tyre is needed but the weight to be carried is heavier than what a castor with a standard rubber tyre wheel can hold. -
In Stock160mm Swivel Castor, 135kg Capacity | Rubber Tyre Wheel, Roller Bearing (LI160RMBNOTG)
Original price was: £10.58.£9.92Current price is: £9.92. Sale!160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Black Rubber Tyre / Metal Centre Centre Wheel with Roller Bearing. Load Capacity = 135kg -
In Stock100mm AGV Swivel Castor, Twin Wheel, 310kg Load | Polyurethane Wheel, Ball bearing (GATD100ASFHUD)
Original price was: £569.41.£220.07Current price is: £220.07. Sale!This Twin wheel ... Read More100mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The Top Plate is 112mm x 112mm and has 4 bolt holes that are spaced 92mm x 92mm, each with a 9mm hole diameter. The castor is able to tilt +/- 5o from its central axis according to the flatness of the floor. This ensures that this castor's wheels keep contact with the floor allowing smooth AGV movement and protection of the loaded cargo when changing directions (See illustration below)
The wheels are more widely separated from each other than most Twin Wheel Castors. When changing direction, the two wheels spin in opposite directions to each other which reduces the castor offset. The smaller the offset the less chance that the AGV will deviate from its designated line.
This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. -
In Stock125mm Swivel Castor, 250kg Capacity | Nylon Wheel, Ball Bearing (KS125NYB250)
£34.17125mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 80x60 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 250kg -
In Stock63mm Footmaster Levelling Castor, Plate Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80F)
£51.3663mm Foot Master Levelling Castor with an Ivory Co... Read Morelour powder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 28mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation This product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
Out of Stock - On the Way125mm Swivel Castor, 85kg Capacity | Rubber Tyre Wheel, Ball Bearing (1321104)
£14.71125mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Grey Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 85kg -
In Stock125mm Swivel Castor, 100kg Capacity | Grey Rubber Tyre Wheel, Roller Bearing (MSV125GRP1B)
£8.85125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Grey Non-Marking Rubber Tyre / Plastic Centre Wheel with Roller Bearing. Load Capacity = 100kg
