- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Plain Bore (461PN)
£20.54100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80mm Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 250kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
-
In Stock125mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (522SUB)
£47.77125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 250kg -
In Stock50mm Footmaster Levelling Castor, 250kg Capacity | Nylon Wheel (KGDR-60F)
£47.5550mm Foot Master Levelling Castor with an ivory co... Read Moreloured powder coating finish. This product has a 4-hole top plate with 58mm x 58mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 25mm Tread width and the Die Cast Aluminium Foot Pad has a rubber pad vibration damping rubber pad. This foot pad has a Retractable Ratchet operation. This product's load capacity has been increased to 280kg Static Load and 140kg Dynamic Load. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. -
In Stock125mm Swivel Castor, 100kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV125RMB)
£8.81125mm Top Plate Swivel Castor with a Black Rubber ... Read MoreTyre Wheel on a Pressed Steel centre complete with Thread Guards. It has 80x60mm bolt hole centres and a load capacity of 100kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. -
In Stock150mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG150PCB)
£59.95150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a Polyurethane Tyre wheel with a Cast Iron Centre and Ball Bearings. Load Capacity = 500kg using manual propulsion at 4 km/h. Key Specifications:- Top Plate Size: 140mm x 110mm
- Bolt Hole Centres: Slotted to 114x87mm / 97.5x71.5mm
- Overall Height: 190mm
- Tread Width: 45mm
-
In Stock100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Plain Bore (Flexello 422RN)
£27.16100mm Top Plate Swivel Castor (Heavy Duty Pressed ... Read MoreSteel Frame) with 80X60mm Bolt Hole Centres to suit an 8mm Bolt. The wheel is an Elastic Blue Rubber Tyre on a Nylon Centre with a smooth Plain Bore. The load capacity is 160kg using manual propulsion at 4km/h (walking speed). The Blue Elastic Rubber Tyre is a soft tread and is gentle on floors and non-marking.
-
In Stock200mm Swivel Castor, 550kg Capacity | Nylon Wheel, Ball Bearing (KS200NYB550)
£51.56200mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 105x80 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 550kg -
In Stock100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH100PN1B)
£8.28100mm Red Polyurethane Tyre Wheel on a Nylon Ce... Read Morentre with a roller bearing fitted into a single bolt hole pressed steel swivel castor bracket. The Swivel Bracket has 12mm single bolt hole. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.
-
In Stock125mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (DSRN12511030)
Original price was: £17.01.£8.51Current price is: £8.51. Sale!125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg Key Specifications:- Wheel Diameter: 125mm
- Wheel Tread Width: 28mm
- Top Plate Dimensions: 105x85mm
- Bolt Hole Centre: 80/77x60mm
- Fixing Bolt Hole Size: 9mm (suits 8mm bolts)
- Swivel Radius: 103.5mm
- Overall Height 155mm
- Wheel Material: Blue Elastic Rubber Wheel / Black Nylon Centre
- Bearing Type: Roller Bearing
- Load Capacity: 200kg (using manual propulsion at 4km/h - walking speed)
-
In Stock100mm Swivel Castor, 80kg Capacity | Polypropylene Wheel, Plain Bore (LSV100PPBH)
£7.27100mm White Polypropylene wheel with a smooth p... Read Morelain bore fitted into a 12mm Single Bolt Hole Swivel Castor (Pressed Steel castor frame). This castor has a 80kg load capacity using manual propulsion at 4 km/h.
This castor is fitted with a White Polypropylene wheel that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
-
In Stock63mm Black Footmaster Levelling Castor, Stem Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80SBLACK)
£48.0963mm Footmaster Levelling Castor with an M12 x 18m... Read Morem Threaded Stem finished in Finished with a Black powder coating. This product has a black Nylon Wheel with a 28mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation. This product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load (GD-80-S-NYN-BLK) Because of the lifting and lowering function of the Footmaster Levelling castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock100mm Swivel Castor, 250kg Capacity | Nylon Wheel, Roller Bearing (MSK100NY1B)
£13.59100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 250kg -
In Stock200mm Swivel Castor, 1090kg Capacity | Cast Iron Wheel, Roller Bearing (855CIB)
£101.91200mm Top Plate Swivel Castor with 140x105mm Bolt ... Read MoreHole Centres each suiting an M10 fixing bolt. The heavy duty bracket has a swivel head with roller ball bearings and has a grease nipple. The pressed steel frame has a bright zinc finish. This castor houses a quality Flexello Cast Iron Wheel that has a Roller Bearing fitted into the central bore to reducing rolling resistance. The Load Capacity of this castor is 1090kg. -
In Stock80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH080RN1B)
£8.0180mm Single Bolt Hole (12mm) Swivel Castor with Bl... Read Moreue Rubber Tyre Wheel / Nylon Centre and Roller Bearing. Load Capacity = 130kg -
In Stock125mm Swivel Castor, 360kg Capacity | Nylon Wheel, Roller Bearing (561NYB)
£30.84125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 360kg
