- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock125mm Swivel Castor, 400kg Capacity| Nylon Wheel, Ball Bearing (KS125NYBJ400)
£41.00125mm Swivel Castor (Heavy Duty Pressed Steel) wit... Read Moreh a 135mm x 110mm Top Plate with 105x80mm Fixing Hole spacings. The castor wheel is a Solid White Nylon Castor Wheel with two ball bearings. Load Capacity = 400kg -
In Stock100mm Swivel Castor, 225kg Capacity | Nylon Wheel, Plain Bore (TS4100NY04)
£20.19100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 225kg -
In Stock50mm Black Footmaster Levelling Castor, Plate Fitting, 280kg Capacity | Nylon Wheel (KGD-60FBLACK)
£32.5650mm Foot Master Levelling Castor with a black pow... Read Moreder coating finish. This product has a 4-hole top plate with 58mm x 58mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 25mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation This product's load capacity has increased to 280kg Static Load and 140kg Dynamic Load (GD-60-F-NYN-BLK) Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity. This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock240mm Swivel Castor 150kg Load Capacity, Puncture Proof, Pressed Steel Bracket (KS260EVA)
£96.35240mm Puncture Proof Swivel Castor (Pressed Steel)... Read More with 200X160mm Top Plate Dimensions and 150X115mm Fixing Bolt Hole Centres. This Castors has an Overall Height of 297mm. The wheel has an 85mm Tread Width and Roller Bearing. Load Capacity = 150kg. -
Out of Stock - On the Way125mm High Temperature Swivel Castor, 150kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX125HTBH)
£32.66125mm Single Bolt Hole Swivel Castor (Pressed Stee... Read Morel) with High Temperature Phenolic Wheel (Plain Bore) - Rated to +280 degrees C. Load capacity = 125kg -
In Stock100mm Swivel Castor, 300kg Capacity | Nylon Wheel, Ball bearing (MSK100NY2B)
£17.60100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 300kg -
In Stock150mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS150PNB)
£39.23150mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock200mm Swivel Castor, 1400kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (2HKSE20020241)
£251.38200mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor - Twin Wheel). The Top Plate measures 149x110mm with 105x80mm Fixing Hole Centres. A grease nipple is fitted to the swivel head to enable easy maintenance. The load capacity of this dual wheel castor is 1400kg. This castor has directional lock slots in the swivel head to enable the attachment of a retro fit directional lock (HKDL). The overall height of this castor is 283mm. The Wheel has a Polyurethane Tyre (92 Shore A) on a Cast Iron Centre Wheel with Ball Bearings. The polyurethane tyre is abrasion resistant with a low rolling resistance. The elasticity of the polyurethane allows the wheel absorb some of the rolling vibrations. This provides the user with a smoother and quieter operation yet is gentler on concrete floors compared to hard treads such as Cast Iron. -
In Stock150mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Ball bearing (GXT150ASFHUD)
Original price was: £476.39.£299.19Current price is: £299.19. Sale!150mm Polyure... Read Morethane tyre Wheel with an aluminium centre fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes incorporate the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1500kg at 4km/h
This high performance castor is fitted with a quality polyurethane tyre wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
-
In Stock63mm Swivel Castor, 60kg Capacity | 63mm Rubber Tyre Wheel, Plain Bore (261RN)
£8.8063mm Swivel Castor (Pressed Steel) with 4-hole top... Read More plate and 76x44.5mm Fixing Bolt Hole Centres and an overall height of 81mm. The wheel has a Blue Elastic Rubber Tyre with a black Nylon Centre, 25mm Tread Width and a smooth Plain Bore. Load Capacity = 60kg. Elastic Blue Rubber tyres are stronger than standard natural rubber. It has a soft tread and is both gentle on floors and non-marking while absorbing fine vibrations when moving which provides user comfort and limits noise. -
In Stock125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Roller Bearing (522RNB)
£30.43125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 180kg -
In Stock100mm Swivel Castor, 900kg Capacity | Nylon Wheel, Ball bearing (GXT100ASFMCD)
Original price was: £204.12.£128.20Current price is: £128.20. Sale!100mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with a double thrust bearing in the swivel head to optimise the load capacity. The fixing bolt spacings are the European Standard size of 80x60mm. The load capacity of this castor is 900kg at 4km/h
This high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. The extra strong welded castor frame is powder coated to protect the frame and top plate and it is fitted with a high performance castor wheel containing two ball bearings. The bearings turn on a specially designed integrated axle shaft arrangement making this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical.
The double thrust bearing in the swivel head optimise heavy loads
-
In Stock75mm Swivel Castor, 50kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV075RMB)
£4.2675mm Top plate Swivel Castor with a Black Rubber T... Read Moreyre Wheel on a pressed steel centre. It has 55x42mm bolt hole centres and a load capacity of 50kg using manual propulsion at 4km/h. This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. -
In Stock200mm Swivel Castor, 800kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS200APCB800BR)
£105.67200mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (Heavy Gauge Pressed Steel Bracket) with 105x80mm Bolt Hole Centres. Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 800kg -
In Stock160mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSZ160PN1B)
£27.19160mm Swivel Castor (Pressed Steel). This castor's... Read More Wheel has a Red Polyurethane Tyre on a White Nylon Centre with a Roller Bearing. The Load Capacity is 300kg using manual propulsion at 4 km/h. Key Specifications:- Top Plate Dimensions: 130x110mm
- Fixing Bolt Hole Spacings: 105x80mm drilled to suit 10mm fixing bolts
- Overall Height: 190mm
- Offset: 52mm
- Swivel Radius: 134mm
- Tread Width: 40mm
- Shore Hardness: Shore A 92+3
