- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSVH100PN2B)
£9.41100mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has a Polyurethane Tyred Wheel on a Nylon Centred Wheel with a single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. -
In Stock200mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH200PN1B)
£31.14200mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Red Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 250kg -
In Stock125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321010)
£8.75125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
-
In Stock100mm Swivel Castor, 250kg Capacity | Nylon Wheel, Plain Bore (MSK100NY)
£10.54100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 250kg -
In Stock50mm Black Footmaster Levelling Castor, Stem Fitting, 280kg Capacity | Nylon Wheel (KGD-60SBLACK)
£32.56M12 x 18mm Threaded Stem Levelling Castor with a 5... Read More0mm Black Nylon wheel and Black Powder Coating Finish Enhance your equipment's mobility and stability with our M12 x 18mm Threaded Stem Levelling Castor. This high-performance castor features a durable 50mm black Nylon wheel with a 25mm tread width and a robust Die Cast Aluminium foot pad. The foot pad is equipped with a vibration-damping rubber pad and a convenient Nylon hand-wheel for easy operation. Key Features:- Load Capacity: 280kg Static Load, 140kg Dynamic Load
- Versatile Functionality: Provides mobility, levelling, and anti-vibration functions
- Durable Construction: Black powder coating finish for long-lasting use
- Precise Levelling: Jacking castor design for smooth lifting and lowering
-
In Stock125mm Stainless Steel Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS125RNBBH)
£38.43125mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock125mm Swivel Castor, 325kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (561SUB)
£53.61125mm Top Plate Swivel Castor made from Pressed St... Read Moreeel (Flexello Brand) and has a ball bearing swivel race. The Top Plate has four fixing holes to suit 10mm bolts and are slotted to 140/120mm x 105/95mm Bolt Hole Centres. The caster wheel has a Red Polyurethane Tyre on a Cast Iron Centre Wheel with with A 35mm Tread Width and a Needle Roller Bearing. Load Capacity = 325kg -
In Stock250mm Swivel Castor, 1100kg Capacity | Nylon Wheel, Ball bearing (HKS25025111)
£184.08250mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 1100kg -
In Stock100mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Plain Bore (422PN)
£24.96100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Hole Centres. Polyurethane Tyre on a Nylon Centre Wheel with a Smooth Plain Bore. Load Capacity = 250kg.
-
In Stock125mm Swivel Castor, 100kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHS125TPR)
£12.15This apparatus /... Read More institutional castor comes with a 125mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with a double ball race swivel head. The load capacity of this castor is 100kg using manual propulsion at 4km/h This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings -
Out of Stock - On the Way75mm Swivel Castor, 80kg Capacity | Nylon Wheel, Plain Bore (2KS075PPBH)
£7.6875mm Twin Wheel Single Bolt Hole Swivel Castor (Pr... Read Moreessed Steel) with 10mm Fixing Hole and 99mm overall height. Black Polypropylene Wheel with Plain Bore and a Load Capacity of 80kg -
In Stock100mm High Temperature Swivel Castor, 120kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX100HT)
£17.99100mm Swivel Castor (Pressed Steel) with 80x60mm B... Read Moreolt Hole centres and 128mm Overall Height. This castor houses a High Temperature Black Phenolic Wheel with a 35mm Tread Width and Smooth Plain Bore. It is Rated to +280 degrees C and has a Load Capacity = 120kg -
In Stock160mm Swivel Castor, 450kg Capacity | Nylon Wheel, Ball Bearing (KSMG160NYB)
£38.86160mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 450kg -
In Stock150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Plain Bore (661RN)
£41.06150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 300kg -
In Stock100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSK100RN1B)
£16.35100mm Top Plate Swivel Castor (Heavy Gauge Pressed... Read More Steel) with 80x60 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 160kg
