- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (461PAB)
£32.75100mm Top Plate Swivel Castor with 105x80mm Bolt H... Read Moreole Centres. Polyurethane Tyre / Aluminium Centre Wheel with Ball Bearings. The Load Capacity is 300kg using manual propulsion at 4km/h. Key Specifications:- Top Plate Size: 128x102mm
- Bolt Hole Centres: 100/105mm x 76/60mm
- Overall Height: 125mm
- Offset: 26mm
- Wheel Material: Polyurethane Tyre (94 Shore A) / Aluminium Centre
- Bearing Type: Ball Bearings
-
In Stock75mm Swivel Castor, 50kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV075RP)
£3.5075mm Grey Rubber Tyre Wheel on a Nylon centre fitt... Read Moreed into a Top Plate Swivel Castor with 55x42mm bolt hole centres. The load capacity of this castor is 50kg using manual propulsion at 4km/h. This popular general, light duty general purpose castor is fitted with a grey rubber tyre that is non-marking and gentle on floors. This castor is ideal for most domestic or industrial castor uses where a small yet sturdy swivel castor in needed. -
In Stock125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Single Ball Bearing (MSVH125NY2B)
£12.53125mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has a Nylon Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. -
In Stock125mm Swivel Castor, 100kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHS125TPR)
£12.15This apparatus /... Read More institutional castor comes with a 125mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with a double ball race swivel head. The load capacity of this castor is 100kg using manual propulsion at 4km/h This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings -
In Stock200mm Swivel Castor, 350kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV200RN2B)
£36.57200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel with ball bearings. Load Capacity = 350kg Blue elastic rubber tyres are gentle on floors and non-marking. They are a popular choice when a castor with a rubber tyre is needed but the weight to be carried is heavier than what a castor with a standard rubber tyre wheel can hold. -
In Stock125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1321028)
£10.58125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
-
In Stock80mm Swivel Castor, 70kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV080GRP1B)
£6.3680mm Grey Rubber Tyre wheel on a plastic centre... Read More with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 70kg using manual propulsion at 4km/h (walking speed)
The Grey Rubber Tyre is a softer wheel compared to hard tread wheels like nylon and the rubber absorbs vibrations whilst in motion making this a low noise option and will not mark or scratch the floor. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castor a great choice for many industrial or domestic applications.
-
In Stock100mm Spring Loaded Gate Castor with non-marking wheel, 57kg Load Capacity (GCLD100)
Original price was: £13.09.£10.11Current price is: £10.11. Sale!Standard Gate Castor spring loaded for use on unev... Read Moreen surfaces. This gate castor comes with a swivel castor bracket with a 100mm non-marking wheel. It comes pre-drilled with two 10mm fixing holes spaced 60mm apart. Spring loaded gate castors help with opening and closing heavy gates (57kg) and because the spring allows the height to adjust with when it moves, it is suitable for use on uneven surfaces. The gate castor will help support the gate to help prevent it from dragging on the floor and hinge damage -
Out of Stock - On the Way125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321070)
£8.60125mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg -
In Stock200mm Swivel Castor, 500kg Capacity | Nylon Wheel, Ball Bearing (MSK200NY2B)
£36.34200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. White Nylon Wheel with Ball Bearings. Load Capacity = 500kg.
-
In Stock150mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (661PNB)
£49.78150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 600kg -
In Stock100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSV100NY1B)
£7.61100mm White Nylon Wheel with a roller bearing f... Read Moreitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.
-
In Stock260mm Swivel Castor, 150kg Capacity | Pneumatic Wheel, Roller Bearing (KS260APNB)
£70.28260mm Pneumatic Top Plate Swivel Castor (Pressed S... Read Moreteel) with 150x115mm Fixing Bolt Hole Centres. Pneumatic Tyre / Metal Centre Wheel with Roller Bearing. Load Capacity = 150kg. This wheel is sized 3.00-8 with a 2 ply tyre thickness making it a strong Light-Medium duty wheel and though it has a 10" diameter, it is also commonly referred to as a 260mm wheel. -
In Stock50mm Compact Swivel Castor, 150kg Capacity | 50mm Polyurethane Tyre Wheel, Ball bearing (KS050PT2B)
£15.6550mm Low Level swivel castor with 90x66mm Top Plat... Read Moree and 75/61x51/45mm Fixing Bolt Hole Centres. This Low Level compact castor has an overall height of 73mm and an Orange Polyurethane Wheel on a steel centre with a 33mm Tread Width and Ball bearings. Load Capacity = 150kg -
In Stock100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (XS100NYB130)
Original price was: £6.36.£5.97Current price is: £5.97. Sale!100mm Top Plate Swivel Castor with 80mm x 60mm Bol... Read Moret Hole Centres and a White Nylon Wheel with Needle Roller Bearing. The castor is made from Pressed Steel and the bolt holes are slotted to 80/77mm x 60mm and each of the 4 holes suit an 8mm fixing bolt. The load capacity is 150kg using manual propulsion at 4km/h (walking speed)
