- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock50mm Footmaster Levelling Castor, 250kg Capacity | Nylon Wheel (KGDR-60S)
£46.47M12 x 18mm Threaded Stem Fitting Foot Master Le... Read Morevelling Castor with an ivory coloured powder coating finish. This product has a black Nylon Wheel with a 25mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Retractable Ratchet operation.
.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
-
In Stock150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (622RNB)
£40.29150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg -
In Stock125mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KS125PCB300)
£63.15125mm Top Plate Swivel Castor (Industrial Castor -... Read More Pressed Steel Frame). This castor has a 4 hole top plate with 80x60mm Fixing Bolt Hole Centres and an overall height of 159mm. The wheel has an orange Polyurethane Tyre with a Cast Iron Centre and Ball Bearings. Load Capacity = 300kg -
In Stock100mm Swivel Castor, 225kg Capacity | Nylon Wheel, Roller Bearing (TS4100NY14)
£22.34100mm Swivel Castor (REVVO Brand) with a White Nyl... Read Moreon Wheel. The top plate measures 135mm x 110mm and the Fixing Bolt Hole Centres are 105x80mm. The castor wheel has a 35mm Tread Width with a Needle Roller Bearing and the Load Capacity is 225kg using manual propulsion at 4km/h (walking speed). The white nylon wheel is a hard tread which provides the lowest rolling resistance and maximum mobility. Being nylon the wheel is non-marking and will not damage concrete floors.
-
Out of Stock - On the Way
250mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KS250PCB1500A)
£231.00250mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 160x120 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1500kg -
In Stock75mm Swivel Castor, 160kg Capacity | Nylon Wheel, Plain Bore (TS4075NY04)
£19.8075mm Top Plate Swivel Castor (Pressed Steel) wi... Read Moreth a 135x110mm top plate and 105X80mm Bolt Hole Centres. This castor is fitted with a Nylon Wheel with a smooth Plain Bore. Load Capacity = 160kg
This castor's feature is that it has a higher load capacity and larger top plate than most 75mm swivel castors.
-
In Stock200mm Swivel Castor, 250kg Capacity | Polypropylene Wheel, Plain Bore (LSV200PP)
£19.09200mm Top Plate swivel Castor with a White Polypro... Read Morepylene wheel. It has 105x80mm fixing bolt hole centres, 235mm overall height and the load capacity is 250kg using manual propulsion at 4km/h. This is one of our most popular castors and the White Polypropylene wheel is non-marking and won’t damage concrete floors. Because it is a hard tread it has the lowest rolling and swivelling resistance. It is ideal as a new component or a replacement caster for most general purpose domestic or industrial castor where the travel speed of the castor generally does not exceed walking speed. -
In Stock100mm Swivel Castor (12mm Bolt Hole), 180kg Capacity | Rubber Tyre Wheel (MSZH100RN1B)
Original price was: £12.57.£9.10Current price is: £9.10. Sale!100mm Single Bolt Hole (12mm) Swi... Read Morevel Castor with a Blue Elastic Rubber Tyre (Shore A 68) on a Black Nylon Centre Wheel with a Roller Bearing. Load Capacity = 180kg using manual propulsion at 4km/h. Key Specification:- Bolt Hole Size: 13mm (to suit M12 Fixing Bolts)
- Overall Height: 125mm
- Offset: 36mm
- Swivel Radius: 86mm
- Tread width: 36mm
- Bearing Type: Roller Bearing
- Tyre Hardness: Shore A 68
- High Load Capacity
- Low Rolling Resistance
- Reduce Vibration
- Low noise Operation
-
In Stock100mm Swivel Castor | Polyurethane Tyre Wheel, Roller Bearing, 180kg Capacity (MSZ100PN1B)
Original price was: £12.82.£9.29Current price is: £9.29. Sale!100mm Red Polyurethane Tyre Wheel on a Nylon Centr... Read Moree with a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 180kg using manual propulsion at 4km/h (walking speed) Key Specification:- Top Plate Size: 105x80mm
- Bolt Hole Centres: 80/76X60mm
- Bolt Hole Size: 9mm (to suit M8 Fixing Bolts)
- Overall Height: 125mm
- Offset: 36mm
- Swivel Radius: 86mm
- Tread width: 34mm
- Bearing Type: Roller Bearing
- Tyre Hardness: Shore A 92
- Key Features:
- High Load Capacity
- Low Rolling Resistance
- High Wear Resistance
- Reduce Vibration
- Low noise Operation
-
In Stock125mm Stainless Steel Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS125RNBBH)
£38.43125mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg -
In Stock200mm Swivel Castor, 500kg Capacity | Nylon Wheel, Roller Bearing (822NYB)
£51.97200mm Flexello Top Plate Swivel Castor (Pressed St... Read Moreeel) With 105X80mm Bolt Hole Centres. White Nylon Wheel With Roller Bearing. Load Capacity = 500Kg -
In Stock150mm Swivel Castor, 520kg Capacity | Nylon Wheel, Plain Bore (661NY)
£35.65150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105mm Bolt Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 520kg -
In Stock160mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV160RN1B)
£29.21160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg -
In Stock100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing, (1321788)
£9.55100mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Ball Bearing. Load Capacity = 150kg -
In Stock50mm Swivel Castor, 50kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV050RP)
£2.3250mm Swivel Castor with a non-marking Grey Rubber ... Read MoreTyre Wheel on a nylon centre. This castor is made from Pressed Steel and has a Top Plate with 36x36mm bolt hole centres which suit a 6mm fixing bolt. The load capacity of this castor is 50kg using manual propulsion at 4km/h This popular general purpose castor is fitted with a grey rubber tyre wheel that will not mark or damage the floor. It is ideal for most domestic and industrial castor uses where a small yet sturdy castor in needed. For example, on a trolley or dolly.
