- Sorry, this product cannot be purchased.
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
-
In Stock125mm Swivel Castor, 325kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (561SUB)
£53.61125mm Top Plate Swivel Castor made from Pressed St... Read Moreeel (Flexello Brand) and has a ball bearing swivel race. The Top Plate has four fixing holes to suit 10mm bolts and are slotted to 140/120mm x 105/95mm Bolt Hole Centres. The caster wheel has a Red Polyurethane Tyre on a Cast Iron Centre Wheel with with A 35mm Tread Width and a Needle Roller Bearing. Load Capacity = 325kg -
In Stock100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (XS100NYB130)
Original price was: £6.36.£5.97Current price is: £5.97. Sale!100mm Top Plate Swivel Castor with 80mm x 60mm Bol... Read Moret Hole Centres and a White Nylon Wheel with Needle Roller Bearing. The castor is made from Pressed Steel and the bolt holes are slotted to 80/77mm x 60mm and each of the 4 holes suit an 8mm fixing bolt. The load capacity is 150kg using manual propulsion at 4km/h (walking speed) -
In Stock100mm Swivel Castor, 340kg Capacity | Cast Iron Wheel, Plain Bore (461CI)
£24.40100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80 Hole Centres. Cast Iron Wheel with Plain Bore. Load Capacity = 340kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
-
In StockSwivel Castor, 1000kg Capacity | 150mm Polyurethane Tyre Wheel, Ball bearing, (K2ST150PC2B)
£301.24150mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor. The swivel head turns on thrust and taper roller bearings for extra strength and the bracket is finished in black epoxy paint.
This castor has a top plate measuring 170mm x 170mm with bolt hole spacings of 130mm x 130mm drilled to 13mm diameter. The two Polyurethane Tyre on a Cast Iron Centre wheels each have ball bearings fitted to reduce the rolling resistance.
The castor has a 1000kg Load Rating at 4km/h
-
In Stock75mm Footmaster Levelling Castor, Stem Fitting, 100kg Capacity | Nylon Wheel (KGD-120S)
£67.7775mm Footmaster Levelling Castor with M16x 24mm St... Read Moreem Fitting (GD-120-S-NYN). 1000kg Static and 500kg Dynamic Load Capacity. Die Cast Aluminium Foot Pad. Hex Adjuster with M16 Leveler (Spanner not included) The Foot Master levelling castor is a multi-functional swivel castor that provides mobility and levelling functions. This allows users to move and position large equipment into place with added stability using the levelling feature. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity. -
In Stock50mm Footmaster Castor with Levelling Foot, 150kg Capacity | Nylon Wheel, Plain Bore (KGDH50ASFNYN)
Original price was: £35.45.£27.35Current price is: £27.35. Sale!This 50mm Swivel Castor has Black Nylon wheel (pla... Read Morein bore) with an extra long adjustable foot (GDH-50-ASF-NYN). The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear. The Threaded section of the Adjustable Foot extends a maximum of 56mm above the top of the top plate (64mm including the hex head). The Hex Head can be operated by a drill for quick operation. The overall height of the castor is 73mm and the adjustable foot can extend by up to 35mm to enable precise levelling. The load capacity of this product is 150kg and the recommended maximum total load over 4 castors is 450kg. -
In Stock200mm Swivel Castor, 500kg Capacity | Nylon Wheel, Ball Bearing (MSK200NY2B)
£36.34200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. White Nylon Wheel with Ball Bearings. Load Capacity = 500kg.
-
In Stock125mm Swivel Castor, 100kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHS125TPR)
£12.15This apparatus /... Read More institutional castor comes with a 125mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with a double ball race swivel head. The load capacity of this castor is 100kg using manual propulsion at 4km/h This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings -
In Stock
100mm Swivel Castor, 250kg Capacity | Nylon Wheel, Roller Bearing (MSK100NY1B)
£13.59100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 250kg -
In Stock100mm Swivel Castor (10mm Bolt Hole), 180kg Capacity | Rubber Tyre Wheel (MSZH100RN1B10)
Original price was: £12.57.£9.10Current price is: £9.10. Sale!100mm Single Bolt Hole (10mm) Swi... Read Morevel Castor with a Blue Elastic Rubber Tyre (Shore A 68) on a Black Nylon Centre Wheel with a Roller Bearing. Load Capacity = 180kg using manual propulsion at 4km/h. Key Specification:- Bolt Hole Size: 10.5mm (to suit M10 Fixing Bolts)
- Overall Height: 125mm
- Offset: 36mm
- Swivel Radius: 86mm
- Tread width: 36mm
- Bearing Type: Roller Bearing
- Tyre Hardness: Shore A 68
- Key Features:
- High Load Capacity
- Low Rolling Resistance
- Reduce Vibration
- Low noise Operation
-
Out of Stock - On the Way125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1321108)
£10.52125mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Ball Bearing. Load Capacity = 150kg -
Out of Stock - On the Way97mm Footmaster Levelling Castor, Plate Fitting, 1500kg Capacity | 97mm Nylon Wheel (KGD-150F)
£95.5997mm Footmaster Levelling Castor with Top Plate Fi... Read Moretting (GD-150-F-MCN). 1500kg Static and 750kg Dynamic Load Capacity. The Die Cast Aluminium Foot Pad is operated by a Hex Adjuster with M20 Leveler (Spanner not included) The Foot Master levelling castor is a multi-functional swivel castor that provides mobility and levelling functions. This allows users to move and position large equipment into place with added stability using the levelling feature. Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and levelled is given by the Dynamic Load Capacity.
-
In Stock125mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (DSRN12511030)
Original price was: £14.80.£9.95Current price is: £9.95. Sale!125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg The Blue Elastic Rubber offers a higher load capacity over standard grey or black rubber tyres and will not mark floors. It is a great choice where you need a softer yet resilient wheel that will not mark or damage floors. The wheel is fitted with a roller bearing which consists of steel rollers housed in a plastic cage that lowers rolling resistance even when under load. -
In Stock125mm Fabricated Steel Swivel Castor, 350kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSMG125CRPCB)
£55.12125mm Swivel Castor (Fabricated Steel) with 105x80... Read Moremm Fixing Bolt Hole Centres. The wheel has a Crown Tread Polyurethane Tyred on Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 350kg Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Bearing Type: Ball Bearing
- Tread Hardness: 92 +/-3 Shore A
- Load Capacity: 350kg (manual propulsion at 4km/h)
- Crowned Polyurethane Tread for easy manoeuvrability.
-
Out of Stock - On the Way150mm Stainless Steel Swivel Castor, 200kg Capacity | Nylon Wheel, Plain Bore (MSS150NYBH)
£36.23150mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 200kg
