Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
- Out of Stock - On the Way
Swivel Castor (Twin Wheel), 250mm, 2800kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST250PC2BD)
£598.46250mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor Fitted with A Directional Lock To Lock Swivel Head In A Fixed Direction. The Swivel Head Turns On Thrust and Taper Roller Bearings For Extra Strength and The Bracket Is Finished In Black Epoxy Paint.
This Castor Has A Top Plate Measuring 250mm X 250mm with Bolt Hole Spacings Of 190mm X 190mm Drilled To 19mm Diameter. The Two Polyurethane Tyre on a Cast Iron Centre Wheels Each Have Ball Bearings Fitted To Reduce The Rolling Resistance.
The Castor Has A 2800kg Load Rating At 4Km/H
- Out of Stock - On the Way
300mm Swivel Castor, 680kg Capacity | Rubber Tyre Wheel, Ball bearing (HKS30025341)
£159.79300mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 680kg - In Stock
150mm Swivel Castor, 1020kg Capacity | Cast Iron Wheel, Plain Bore (655CI)
£77.28150mm Top Plate Swivel Castor. The 4 hole top p... Read Morelate measures 162mm x 140mm with 140mm x 105mm Bolt Hole Centres. to suit a 10mm Fixing Bolt. The Wheel is a solid Cast Iron with a smooth plain bore. Load Capacity = 1020kg.
The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head.
- In Stock
150mm Swivel Castor, 520kg Capacity | Nylon Wheel, Roller Bearing (661NYB)
£40.31150mm Flexello Top Plate Swivel Castor (Pressed St... Read Moreeel) with 140x105 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 520kg - In Stock
75mm Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100FBLACK)
£60.6275mm Foot Master Levelling Castor with an Black... Read More powder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation
This product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
- Out of Stock - On the Way
125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321070)
£8.30125mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg - In Stock
125mm Heavy Duty Swivel Castor, 700kg Capacity | White Nylon Wheel, Ball Bearing (HSV125NY2B)
£29.49125mm Heavy Duty Top Plate Swivel Castor with Heav... Read Morey Gauge Pressed Steel and a load capacity of 700kg. The swivel head has a double ball race with hardened ball race track.- The Top Plate measure 105x80mm with 80x60mm Fixing Bolt Hole Centres. The bolt holes are slotted to 80/75x60/55mm and suits 8mm Bolts.
- The castor wheel is a white nylon wheel (polyamide) with a 40mm tread width and fitted with two precision ball bearings. The hard wheel is non-marking and has the lowest rolling and swivel resistance.
- This castor is an excellent all purpose heavy duty castor. It is often used with high load mobile storage and transportation equipment in domestic, mechanical and industrial applications.
- In Stock
150mm Swivel Castor, 700kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HST150PC2B)
£102.65150mm Top Plate Swivel Castor (Black Painted Fabri... Read Morecated Steel) with 120mm x 60mm or 105x80mm Fixing Bolt Hole Centres. The wheel has a Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearings and the load capacity is 700kg and 4km/h (walking speed) using manual propulsion. - In Stock
125mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH125RN1B)
£11.65125mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Blue Elastic Rubber Tyre / Nylon Centred Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
75mm Black Low Level High Load Swivel Castor, 540kg Capacity | Nylon Wheel, Roller Bearing (BMCS75E)
Original price was: £26.89.£16.72Current price is: £16.72. Sale!This High Load / Low Level Swivel Castor is made t... Read Moreo take a heavy load with a low overall height of 104mm. It has a 4 hole top plate measuring 105x79.5mm with 85.4x60.35mm bolt hole centres and the swivel head is fitted with a grease nipple.To enable the castor to operate under heavy loads of up to 540kg each castor (1,620kg total load capacity with 4 castors fitted), the swivel head has a heavy duty double ball bearing race.The caster wheel is heavy duty nylon with a 46mm tread width and needle roller bearing to reduce the rolling resistance and is an ideal castor for heavy duty applications, such as business machines, where there is an height restriction. The black nylon castor wheel will not damage concrete floors. - In Stock
100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (TSH100RU1H)
£85.72100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 150kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
50mm Swivel Castor, 27kg Capacity | Rubber Tyre Wheel, Plain Bore (961RN)
£5.1050mm Top Plate Swivel Castor (Pressed Steel) with ... Read More54x25mm Fixing Bolt Hole Centres and 64mm Overall Height. The wheel is a Blue Rubber Tyre on a Black Nylon Centre Wheel with a Smooth Plain Bore and a 22mm Tread Width. Load Capacity = 27kg.The blue rubber tyre wheel has a soft tread and is both gentle on floors and non-marking. It also absorbs fine vibrations whilst moving which provides user comfort and limits noise. - In Stock
75mm Stainless Steel Swivel Castor, 75kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKATS075TPR)
£8.63This Stainless Steel apparatus / institutional cas... Read Moretor comes with a 75mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has a 60x60mm 4 hole Top Plate with slotted fixing bolt holes at 48/39x48/39mm. The load capacity of this castor is 75kg using manual propulsion at 4km/hThe grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors.Download Series Data Sheet here - In Stock
50mm Swivel Castor, 55kg Capacity | Rubber Tyre Wheel, Plain Bore (2KS050TPRBH)
£8.8250mm Twin Wheel Single Bolt Hole Swivel Castor (Pr... Read Moreessed Steel) with 10mm Fixing Hole. Grey Thermoplastic Rubber Tyre / Polypropylene Centre Wheel with Plain Bore. Load Capacity = 55kg