Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock100mm Swivel Castor, 300kg Capacity | Cast Iron Wheel, Roller Bearing (KSMG100CIB)
£28.41100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. The wheel is a solid Cast Iron Wheel with a Needle Roller Bearing. Load Capacity = 300kg using manual propulsion at 4km/h (walking speed).Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Offset: 35mm
- Bearing Type: Roller Bearing
- Load Capacity: 300kg (manual propulsion at 4km/h)
- Cast iron castor wheels have a very hard tread making them the easiest of wheels to move (low tractive resistance). They have a very high load capacity, extremely wear resistant and not affected by swarf or aggressive materials.
- In Stock
150mm Swivel Castor with Brake, 700kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HBT150PC2B)
£116.48150mm Top Plate Swivel Castor with Total Stop Brak... Read Moree (Locking both the swivel head and the wheel). This fabricated castor is coated in Black paint and the top plate has 120x60mm or 105x80mm Slotted Hole Centres. The wheel has a Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearings and the load capacity is 700kg at 4km/h (walking speed) using manual propulsion - Out of Stock - On the Way
80mm Stainless Steel Swivel Castor, 120kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS080RNB)
£20.2880mm Top Plate Swivel Castor (Stainless Steel Cast... Read Moreor) with 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 120kg - Out of Stock - On the Way
125mm Swivel Castor, 1500kg Capacity | Cast Nylon Wheel, Ball bearing (GXT125ASFMCD)
Original price was: £376.72.£236.60Current price is: £236.60.Sale!125mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes cover the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1500kg at 4km/h
This high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
- In Stock
100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel with Single Ball Bearing (MSVH100RN2B)
£10.35100mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has an Elastic Blue Rubber Tyred Wheel on a Nylon Centred Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. - In Stock
100mm Swivel Castor, 340kg Capacity | Cast Iron Wheel, Roller Bearing (461CIB)
£25.33100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80mm Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 340kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
- In Stock
80mm High Temperature Swivel Castor, 100kg Capacity | Phenolic Resin Wheel, Plain Bore (MSX080HT)
£17.2880mm Swivel Castor (Pressed Steel) with 80x60mm Bo... Read Morelt Hole Centres, 108mm Overall Height and High Temperature Black Phenolic Wheel with 35m Tread Width and Smooth Plain Bore. This castor is Rated to +280 degrees C. and has a Load Capacity of 100kg - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (MSV100NY2B)
£8.75100mm White Nylon Wheel with a ball bearing fit... Read Moreted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.</p>
- In Stock
200mm Swivel Castor, 500kg Capacity | Nylon Wheel, Plain Bore (MSK200NY)
£31.31200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. White Nylon Wheel with Plain Bore. Load Capacity = 500kg. - In Stock
125mm Swivel Castor, 250kg Capacity | Nylon Wheel, Roller Bearing (522NYB)
£23.84125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 250kg - In Stock
150mm Swivel Castor, 400kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG150RUB)
£52.33150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Fixing Bolt Hole Centres. Black Rubber Tyre on a Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 400kg - In Stock
125mm Swivel Castor, 400kg Capacity| Nylon Wheel, Ball Bearing (KS125NYBJ400)
£41.00125mm Swivel Castor (Heavy Duty Pressed Steel) wit... Read Moreh a 135mm x 110mm Top Plate with 105x80mm Fixing Hole spacings. The castor wheel is a Solid White Nylon Castor Wheel with two ball bearings. Load Capacity = 400kg - In Stock
80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV080RN2B)
£8.9880mm Blue Elastic Rubber Tyre wheel on a nylon cen... Read Moretre with a ball bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 130kg using manual propulsion at 4km/h (walking speed)The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors. The rubber absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castors a truly great performer.</p> - In Stock
100mm Heavy Duty Swivel Castor, 500kg Capacity | White Nylon Wheel, Ball Bearing (HSV100NY2B)
£27.06This 100mm heavy-duty swivel castor is designed fo... Read Morer demanding applications in both industrial and domestic settings. Featuring a top plate made from heavy gauge pressed steel, it offers exceptional durability and strength. The swivel head includes a double ball race with a hardened ball race track, ensuring smooth and reliable movement.Key Features:- Load Capacity: Supports up to 500kg, making it ideal for heavy loads.
- Top Plate Dimensions: Measures 105x80mm, with fixing bolt hole centres at 80x60mm. The slotted bolt holes (80/75×60/55mm) accommodate 8mm bolts for easy installation.
- Wheel Material: The castor features a white nylon (polyamide) wheel with a 37mm tread width, designed to provide non-marking performance.
- Precision Bearings: Fitted with two precision ball bearings, this castor offers the lowest rolling and swivel resistance in its class, ensuring effortless movement even under heavy loads.
- In Stock
125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Roller Bearing (522RNB)
£30.43125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 180kg
