Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock80mm Swivel Castor, 130kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSVH080RN2B)
£9.8680mm Single Bolt Hole (12mm) Pressed Steel Swivel ... Read MoreCastor. This castors has an Elastic Blue Rubber Tyred wheel on a Nylon Wheel with a Single Ball Bearing. The Load Capacity is 140kg using manual propulsion at 4km/h.- In Stock
50mm Swivel Castor, 50kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV050RPBH)
£2.3850mm Single Bolt Hole Swivel Castor with a non mar... Read Moreking Grey Rubber Tyre Wheel with a nylon centre. This castor has a 10mm Single Bolt Hole Swivel Castor and has a Pressed Steel frame. The load capacity is 50kg using manual propulsion at 4km/hThe a grey rubber tyre that will not mark the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings - In Stock
125mm Swivel Castor, 325kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (561SUB)
£53.61125mm Top Plate Swivel Castor made from Pressed St... Read Moreeel (Flexello Brand) and has a ball bearing swivel race. The Top Plate has four fixing holes to suit 10mm bolts and are slotted to 140/120mm x 105/95mm Bolt Hole Centres. The caster wheel has a Red Polyurethane Tyre on a Cast Iron Centre Wheel with with A 35mm Tread Width and a Needle Roller Bearing. Load Capacity = 325kg - In Stock
50mm Swivel Castor, 27kg Capacity | Rubber Tyre Wheel, Plain Bore (961RN)
£5.2850mm Top Plate Swivel Castor (Pressed Steel) with ... Read More54x25mm Fixing Bolt Hole Centres and 64mm Overall Height. The wheel is a Blue Rubber Tyre on a Black Nylon Centre Wheel with a Smooth Plain Bore and a 22mm Tread Width. Load Capacity = 27kg.The blue rubber tyre wheel has a soft tread and is both gentle on floors and non-marking. It also absorbs fine vibrations whilst moving which provides user comfort and limits noise. - In Stock
150mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (622SUB)
£64.21150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 500kg - In Stock
100mm Swivel Castor, 75kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV100BRP1B)
£5.93100mm Black Rubber Tyre wheel on a plastic centre ... Read Morewith a roller bearing fitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 75kg using manual propulsion at 4km/h (walking speed)The Black Rubber Tyre is softer wheel compared to hard tread wheels like nylon and the rubber absorbs vibrations whilst in motion making this a low noise option and will not scratch the floor. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great choice for many industrial or domestic applications.The wheel might leave marks on the floor and if you want a non-marking version of this castor please order our MSV100GRP1B - In Stock
150mm Swivel Castor, 500kg | Polyurethane Tyre Wheel, Roller Bearing (622PNB)
£38.51150mm Top Plate Swivel Castor (Flexello) with 105X... Read More80mm Fixing Bolt Hole Centres and a 188mm Overall Height. The Castor Wheel has a Red Polyurethane Tyre on a White Nylon Centre Wheel With a 45mm Tread Width and a needle Roller Bearing. Load Capacity = 500Kg using manual propulsion at 4km/h. - In Stock
125mm Swivel Castor, 250kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSK125RN1B)
£21.18125mm Top Plate Fixed Castor (Pressed Steel) with ... Read More80x60mm Hole Centres and 157mm overall height. The Blue Elastic Rubber Tyre wheel on a Nylon Centre contains a roller bearing and has a 40mm Tread Width. Load Capacity = 250kg.This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications.Blue elastic rubber tyres provide the benefits of a rubber tyre wheel such as being gentle on floors and absorbing fine vibrations but they can hold more weight and are non-marking. They are a great solution if you need a rubber tyre wheel but the load being carried is too much for a castor with a standard rubber tyre wheel. - In Stock
50mm Footmaster Levelling Castor, Plate Fitting, 280kg Capacity | Nylon Wheel (KGD-60F)
£32.5650mm Foot Master Levelling Castor with an ivory co... Read Moreloured powder coating finish. This product has a 4-hole top plate with 58mm x 58mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 25mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 280kg Static Load and 140kg Dynamic Load.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel with Roller Bearing (1321786)
£12.96100mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Single Bolt Fixing Hole. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
150mm Swivel Castor, 500kg Capacity | Nylon Wheel, Plain Bore (622NY)
£28.30150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 500kg - Out of Stock - On the Way
250mm Shock Absorbing Swivel Castor, 1000kg Capacity | Polyurethane Tyre Wheel, Ball bearing (GSST250SF)
Original price was: £637.82.£246.51Current price is: £246.51.Sale!250mm Swivel Castor with shock absorption and 30mm... Read More compression. 175x1140mm Top Plate with 149/132x111/99mm slotted fixing bolt holes. Polyurethane Tyre on an Aluminium Centre Wheel fitted with Ball Bearings.Power Towable:- Max. Load at 10km/h = 1,350kg
- Max. Load at 20km/h = 1,000kg
- In Stock
75mm Black Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100FBLACK)
£62.7575mm Foot Master Levelling Castor with an Black po... Read Morewder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
75mm AGV Swivel Castor, 100kg Capacity | Polyurethane Wheel, Ball bearing (GAPL75ASFHUD)
Original price was: £66.49.£25.70Current price is: £25.70.Sale!75mm Automate... Read Mored Guided Vehicle (AGV) Castor has a bracket made from strong pressed steel with precision ball bearings in the swivel head for smooth swivelling action and durability. The load capacity of this castor is 100kg
The bolt holes are slotted to 78mm x 45mm / 72mm x 45mm with a 9mm hole diameter,
This castors is fitted a Polyurethane tyre (Shore A 90) on an Aluminium centre containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor.
Many AGV applications require the castor to run 24 hours a day and the durability of the castor is important to reduce costs associated with stoppage. By using bearing steel with a higher strength than general steel in the swivel head, this castor has an exceptional performance.
- In Stock
100mm Swivel Castor, 300kg Capacity | Nylon Wheel, Ball bearing (MSK100NY2B)
£17.60100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 300kg
