![Swivel Castors](https://www.keystonecastors.co.uk/wp-content/uploads/2023/06/150mm-Swivel-Castor-with-Red-Polyurethane-Tyre-White-Nylon-Centre-Wheel-622PNB-scaled.jpg)
Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
![Swivel Castor Components Diagram](https://www.keystonecastors.co.uk/wp-content/uploads/2023/09/Swivel-Castor-Components-Drawing-293x300.jpg)
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 45 Products per page
- In Stock
150mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (622SUB)
£59.93150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 500kg - In Stock
125mm Swivel Castor, 250kg Capacity | Nylon Wheel, Ball Bearing (KS125NYB250)
£33.01125mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 80x60 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 250kg - In Stock
100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV100RN2B)
£10.14100mm Swivel Castor bracket (Pressed Steel) fitted... Read More with a Blue Elastic Rubber Tyre on a nylon centre wheel with a ball bearing. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 160kg using manual propulsion at 4km/h (walking speed)The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products.This castor is often used on flight cases as well as in many medical, industrial and domestic applications. - In Stock
100mm Swivel Castor, 250kg Capacity | Nylon Wheel, Plain Bore (MSK100NY)
£10.18100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 250kg - In Stock
63mm Footmaster Levelling Castor, 500kg Capacity | 63mm Nylon Wheel (KGDR-80F)
£62.8663mm Footmaster Levelling Castor with Top Plate... Read More Fitting. 500kg Static and 250kg Dynamic Load Capacity Die Cast Aluminium Foot Pad With Vibration Damping Rubber Pad. Nylon Handwheel with Retractable Ratchet.
The Footmaster levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This load capacity of the Footmaster Castor when being moved and positioned is given by the Dynamic Load Capacity.
- In Stock
80mm Swivel Castor, 130kg Capacity | Nylon Wheel, Roller Bearing (MSVH080NY1B)
£6.4180mm Single Bolt Hole (12mm) Swivel Castor with Ny... Read Morelon Wheel with Roller Bearing. Load Capacity = 130kg - In Stock
200mm Swivel Castor, 205kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV200RP)
£20.90200mm Top Plate Swivel Castor with a Grey Rubber T... Read Moreyre wheel on a Nylon Center. It as 105x80mm fixing bolt hole centres and a Load Capacity of 205kg using manual propulsion at 4km/h.This popular general purpose castor is fitted with a Grey rubber tyre that is both non-marking and gentle on floors. The wheel has a roller bearing that lower the rolling resistance. It makes a great new component to make your equipment mobile or as a replacement castor. It is ideal for most general purpose domestic or industrial applications such as a trolley, dolly or furniture where the travel speed of the castor generally does not exceed walking speed. - In Stock
200mm Swivel Castor, 1500kg Capacity | Nylon Wheel, Ball Bearing (TSH200NY2H)
£139.54200mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 1500kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
150mm Swivel Castor, 400kg Capacity | Rubber Tyre Wheel, Roller Bearing (655RTB)
£87.94150mm Top Plate Swivel Castor. The 4 hole top p... Read Morelate measures 162mm x 140mm with 140mm x 105mm Bolt Hole Centres. to suit a 10mm Fixing Bolt. The Wheel has a Rubber Tyre on Cast Iron Centre with a needle roller bearing. Load Capacity = 400kg.
The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head.
- In Stock
260mm Swivel Castor, 120kg Capacity | Puncture Proof Wheel, Roller Bearing (KS260PPD)
£104.57260mm Puncture Proof Swivel Castor (Pressed Steel)... Read More with 150x115mm Fixing Bolt Hole Centres. Diamond Tread Puncture Proof Wheel on a Red Polypropylene (Plastic) Centre with a Roller Bearing. Load Capacity = 120kgThe wheel is sized 3.00-4 and made from microcellular polyurethane making it a strong Light-Medium duty wheel and though it has a 10" diameter, it is also commonly referred to as a 260mm wheel. - In Stock
50mm Low Level Swivel Castor, 160kg Capacity | Polyurethane Tyre Wheel, Plain Bore (MSTW050PT)
£13.9750mm Low Level Twin Wheel Swivel Castor (Keystone)... Read More with a round top plate. The Polyurethane tyre wheels have a tread width of 14mm each and turn on a smooth Plain Bore. The Load Capacity of 160kg.This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.The round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes) - Out of Stock - On the Way
200mm Swivel Castor, 400kg Capacity | Black Rubber Tyre Wheel, Ball bearing (MSK200EA2B)
£44.57200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Hole Centres. Black Elastic Rubber Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 400kg.Elastic Rubber Tyres have a soft tread and are gentle on floors. They are an excellent choice when a rubber tyre is needed and the weight to be carried is more than what a castor with a standard rubber tyre can hold. - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321780)
£7.29100mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg - In Stock
150mm AGV Swivel Castor ,Twin Wheel, 630kg Load | Polyurethane Wheel, Ball bearing (GATD150ASFHUD)
£707.56This Twin wheel ... Read More150mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability. The Top Plate is 145mm x 145mm and has 4 bolt holes that are spaced 120mm x 120mm, each with a 11mm hole diameter.The castor is able to tilt +/- 5o from its central axis according to the flatness of the floor. This ensures that this castor's wheels keep contact with the floor allowing smooth AGV movement and protection of the loaded cargo when changing directions (See illustration below)The wheels are more widely separated from each other than most Twin Wheel Castors. When changing direction, the two wheels spin in opposite directions to each other which reduces the castor offset. The smaller the offset the less chance that the AGV will deviate from its designated line.This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor.
- Out of Stock - On the Way
250mm Swivel Castor, 2500kg Capacity- Polyurethane Tyre Wheel, Taper Roller (TSX250PTTT)
£597.65250mm Extra Heavy Duty Top Plate Swivel Castor (Fa... Read Morebricated Castor) Power Towable To 20km/h. The top plate has 127X102mm Fixing Bolt Hole Centres and the Polyurethane Tyre / Cast Iron Centre Wheel runs on Taper Roller Bearings. Max. Load Capacity = 2500Kg @ 6km/hLoad capacity reduces as tow speeds increase:Load Capacity = 2,500kg @ 6 km/hLoad Capacity = 2,000kg @ 10 km/hLoad Capacity = 1,400kg @ 16 km/hLoad Capacity = 1,000kg @ 20 km/h - In Stock
41mm Swivel Castor, 20kg Capacity | 41mm Rubber Tyre Wheel, Plain Bore (KLME5814)
Original price was: £1.04.£1.01Current price is: £1.01. Sale!41mm Grey Polypr... Read Moreopylene (plastic) Wheel fitted into a Top Plate Swivel Castor with 38x38mm bolt hole centres. The load capacity of this castor is 20kg using manual propulsion at 4km/hThis popular general, light duty purpose castor will not mark or damage the floor and is ideal for most domestic and industrial castor uses where a small yet sturdy castor in needed. - In Stock
75mm Footmaster Levelling Castor, Plate Fitting, 1000kg Capacity | Nylon Wheel (KGD-120F)
£65.4775mm Footmaster Levelling Castor with Top Plate Fi... Read Moretting. 1000kg Static and 500kg Dynamic Load Capacity. Die Cast Aluminium Foot Pad. Hex Adjuster with M16 Leveller (Spanner not included)The Foot Master levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This load capacity of the Footmaster Castor when being moved and positioned is given by the Dynamic Load Capacity. - In Stock
125mm Swivel Castor, 200kg Capacity | Nylon Wheel, Roller Bearing (MSV125NY1B)
£10.23125mm White Nylon Wheel with a roller bearing f... Read Moreitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 200kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.
- In Stock
100mm Swivel Castor, 80kg Capacity | Polypropylene Wheel, Plain Bore (LSV100PPBH)
£7.02100mm White Polypropylene wheel with a smooth p... Read Morelain bore fitted into a 12mm Single Bolt Hole Swivel Castor (Pressed Steel castor frame). This castor has a 80kg load capacity using manual propulsion at 4 km/h.
This castor is fitted with a White Polypropylene wheel that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
50mm Low Level Swivel Castor, 270kg Capacity | Steel Wheel, Plain Bore (2SL050ST0L)
£27.7850mm Low Level Twin Wheel Swivel Castor (Revvo Bra... Read Morend). The steel wheels each have a tread width of 14mm and turn on a smooth Plain Bore. The Load Capacity of 270kg.This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes) - In Stock
260mm Fixed Castor, 120kg Capacity | Puncture Proof Wheel, Roller Bearing (KF260PPD)
£91.20260mm Puncture Proof Fixed Castor (Pressed Steel) ... Read Morewith 150x115mm Fixing Bolt Hole Centres. Diamond Tread Puncture Proof Wheel on a Red Polypropylene (Plastic) Centre with a Roller Bearing. Load Capacity = 120kgThe wheel is sized 3.00-4 and made from microcellular polyurethane making it a strong Light-Medium duty wheel and though it has a 10" diameter, it is also commonly referred to as a 260mm wheel. - In Stock
63mm Footmaster Levelling Castor, Stem Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80SBLACK)
£46.4663mm Footmaster Levelling Castor with an M12 x 18m... Read Morem Threaded Stem finished in Finished with a Black powder coating. This product has a black Nylon Wheel with a 28mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation.This product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load.Because of the lifting and lowering function of the Footmaster Levelling castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK100PC2B)
£32.27100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 300kg - In Stock
150mm Swivel Castor, 370kg Capacity | Rubber Tyre Wheel, Roller Bearing (TSH150RU15)
£91.95150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Fixing Bolt Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 370kgFeatures of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
100mm AGV Swivel Castor, Twin Wheel, 310kg Load | Polyurethane Wheel, Ball bearing (GAAD100ASFHUD)
£486.37This Twin wheel ... Read More100mm Automated Guided Vehicle (AGV) Castor has a bracket made from strong Forged steel that is zinc plated. There is a hardened Taper Roller Bearing in he swivel head, which has a grease nipple, for smooth swivelling action and durability.The castor is unique because it has a self-aligned function enabled by two swivelling axes each with different swivelling radii so that the castor's offset can automatically alter when changing direction to optimise the castor's turning circle for the AGV. Specifically, the offset can range from 10mm to 30mm which reduces the castors 'swing' enabling it to better follow the designated path.The Top Plate is 112mm x 112mm and has 4 bolt holes that are spaced 92mm x 92mm, each with a 9mm hole diameter,This castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor.
- In Stock
160mm Swivel Castor, 135kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSV160BRP1B)
£15.61160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Bolt Hole Centres. Black Rubber Tyre / Plastic Centre Wheel with Roller Bearing. Load Capacity = 135kg - In Stock
100mm Swivel Castor, 100kg Capacity | Thermoplastic Rubber Wheel, Ball Bearing (KATS100TPR)
£6.12Keystone Appa... Read Moreratus / Institutional Castor with 100mm Grey Thermoplastic Wheel fitted into a Pressed Steel Top Plate Swivel Castor. This caster has slotted bolt hole centres measuring 61.5/56 x 51.5/46.5mm. The load capacity is 100kg using manual propulsion at 4km/h
Running on a quality ball bearing the wheel offers excellent rolling performance. This popular apparatus castor is a great choice for a wide range of industrial and domestic applications such as trolley and garment rails, medical devices and hospitality equipment. Fitted with a grey thermoplastic wheel on a polypropylene centre this wheel is non-marking and gentle on floors and has a large plastic thread guard to protect the ball bearing from dirt ingress
- In Stock
150mm Swivel Castor, 520kg Capacity | Nylon Wheel, Roller Bearing (661NYB)
£40.31150mm Flexello Top Plate Swivel Castor (Pressed St... Read Moreeel) with 140x105 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 520kg - In Stock
100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS100NPSBJ300)
£28.74100mm Top Plate Swivel Castor (Pressed Steel). 80x... Read More60 Bolt Hole Centres. Soft Blue Polyurethane Tyre (Shore A 80) on a Black Nylon Centre. The wheel has two quality ball bearing and the load capacity of this castor is 300kg at 4km/h (walking speed) - In Stock
125mm Swivel Castor, 250kg Capacity | Rubber Tyre Wheel, Ball Bearing, (KSMG125EAB)
£37.01125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Black Rubber Tyre / Aluminium Centre Wheel with Ball Bearing. Load Capacity = 250kg - In Stock
160mm Stainless Steel Swivel Castor, 300kg Capacity | Nylon Wheel, Plain Bore (MSS160NYBH)
£45.03160mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 16mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 300kg - In Stock
300mm Swivel Castor, 1300kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HKS30025241)
£206.66300mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 1300kg - In Stock
35mm Compact Swivel Castor, 100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS035PT2BBH)
£9.9435mm Low Level swivel castor with 10mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 50mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg - In Stock
125mm Swivel Castor, 250kg Capacity | Nylon Wheel, Roller Bearing (522NYB)
£23.03125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Nylon Wheel with Roller Bearing. Load Capacity = 250kg - In Stock
150mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS150PNB)
£37.90150mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
50mm Footmaster Castor with Levelling Foot, 150kg Capacity | Nylon Wheel, Plain Bore (KGDL50ASFNYN)
Original price was: £31.77.£25.53Current price is: £25.53. Sale!This 75mm Medium Duty Levelling Castor with a Blac... Read Morek Nylon wheel (Ball Bearing) and adjustable foot. This castor is a swivel castor with a load capacity of 150kg. The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear.The overall height of the castor is 73mm and the adjustable foot can extend by up to 10mm to enable precise levelling.The load capacity of this product is 150kg and the recommended maximum total load over 4 castors is 450kg. - In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG200RUB)
£57.62200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg - Out of Stock - On the Way
300mm Swivel Castor, 4080kg Capacity | Polyurethane Tyre Wheel, Taper Roller (EH312SUTM)
£1,309.22Extra Heavy Duty Swivel Castor with 300mm Polyu... Read Morerethane Tyre Cast Iron wheel on taper roller bearings. The swivel head contains double taper roller bearings which means it is suited to very heavy applications and with a grease nipple in the swivel head enables re-greasing. The bracket is fabricated forge steel and coated with a black electrostatic finish. The load capacity of this castor is 4,080kg and is suitable for power towing,
The castor has an overall height of 422mm and the top plate measures 178mm x 153mm with bolt hole centres of 127mm x 102mm that are suitable for 16mm bolts, The swivel radius of the castor is the radius of the circle the outer dimension of the wheel would make when swivelling in a stationary position. This is 222mm for this product.
- In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSVH100NY1B)
£6.34100mm White Nylon Wheel with a roller bearing f... Read Moreitted into a pressed steel single bolt hole swivel castor bracket. The Swivel Bracket has a 12mm Single Bolt Hole top plate. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel has a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. Together with the strength of nylon and because it wont damage concrete floors, this makes nylon wheel castors probably the most popular choice. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.
- In Stock
100mm Shock Absorbing Swivel Castor, 100kg Capacity | Polyurethane Tyre Wheel (GDSB100ASFLUD75)
£82.93... Read More-variant-east-asian: normal; font-size: 14px;">100mm Shock Absorbing Swivel Castor, Polyurethane tyre wheel with an Aluminium Centre and precision ball bearings, The polyurethane tyre has a shore hardness of A90 and the Load Capacity of the castor is 100kg.
The Overall height without a load is 171mm and this reduces incrementally by up to 20mm as load increases (see image 2 - GDS100 Curve). It is fully compressed with a load of 75kg.
- In Stock
125mm Swivel Castor, 130kg Capacity | Polyurethane Tyre Wheel, Plain Bore (KS125APNBH)
£14.46125mm Single Bolt Hole (12mm) Swivel Castor wit... Read Moreh Red Polyurethane Tyre on a White Nylon Centred Wheel and Plain Bore. The Load Capacity of this castor is 130kg using manual propulsion at 4 km/h.
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. Polyurethane is non-marking and gentle on floors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.
- In Stock
150mm Swivel Castor, 600kg Capacity | Nylon Wheel, Ball bearing (HKS15020111)
£98.19150mm Top Plate Swivel Castor (Fabricated Steel Br... Read Moreacket) with 105x80mm Bolt Hole Centres. Solid White Nylon Wheel with Ball bearing. Load Capacity = 600kg - In Stock
240mm Swivel Castor 150kg Load Capacity, Puncture Proof, Pressed Steel Bracket (KS260EVA)
£93.09240mm Puncture Proof Swivel Castor (Pressed Steel)... Read More with 200X160mm Top Plate Dimensions and 150X115mm Fixing Bolt Hole Centres. This Castors has an Overall Height of 297mm. The wheel has an 85mm Tread Width and Roller Bearing. Load Capacity = 150kg. - Out of Stock - On the Way
150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG150EAB)
£37.36150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Fixing Bolt Hole Centres. Black Rubber Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 300kg