Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 30 Products per page
- Out of Stock - On the Way
125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Roller Bearing (561RNB)
£33.56125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105mm Bolt Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 180kg - In Stock
125mm AGV Swivel Castor, Twin Wheel, 440kg Capacity | Polyurethane Wheel, Ball bearing (GASD125ASFHUD)
£598.16This Twin wheel ... Read MoreAutomated Guided Vehicle (AGV) Castor with 125m diameter wheels has a shock absorbing function and a bracket made from strong Forged steel that is zinc plated. There is double thrust bearing in the swivel head to achieve a high load capacity and maintain castor performance and durability.The role of the spring in an AGV castor is different to that of a standard shock absorbing castor. In a standard shock absorbing castor, the spring absorbs shock and noise whereas, it's role in a AGV castor is primarily to keep the wheels in contact with the floor.When determining the overall height requirement of a shock absorbing AVG, it should be designed based on the spring cushion being fully compressed.The shock absorbing pad made from a special rubber compound absorbs minor shocks and vibrations to protect the AGV unit. There is a 10mm range of compression which helps prevent the castors from losing contact with the floor which may be caused by small floor imperfections. An AGV's castor leaving the floor when changing directions is often the cause of the AGV becoming unbalanced and coming to a stop by straying off its designated path.The Top Plate is 145mm x 145mm and has 4 bolt holes that are spaced 120mm x 120mm, each with a 11mm hole diameterThis castor frame has two wheels with a Polyurethane tyre (Shore A 95) on an Aluminium centre each containing ball bearings, Having a twin wheel castor is great for reducing the effort required to swivel the castor and most efficient by reducing the amount of room the castor needs to turn the AGV Cart.The polyurethane wheel has excellent elasticity the minimises slipping that can happen when an AGV starts or stops. In addition, the elasticity also absorbs small shocks arising from small imperfections in the floor. The wheel itself is non marking and will not damage the floor. - In Stock
200mm Swivel Castor, 205kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV200RP)
£20.90200mm Top Plate Swivel Castor with a Grey Rubber T... Read Moreyre wheel on a Nylon Center. It as 105x80mm fixing bolt hole centres and a Load Capacity of 205kg using manual propulsion at 4km/h.This popular general purpose castor is fitted with a Grey rubber tyre that is both non-marking and gentle on floors. The wheel has a roller bearing that lower the rolling resistance. It makes a great new component to make your equipment mobile or as a replacement castor. It is ideal for most general purpose domestic or industrial applications such as a trolley, dolly or furniture where the travel speed of the castor generally does not exceed walking speed. - In Stock
125mm Heavy Duty Swivel Castor, 700kg Capacity | White Nylon Wheel, Ball Bearing (HSV125NY2B)
£29.49125mm Heavy Duty Top Plate Swivel Castor with Heav... Read Morey Gauge Pressed Steel and a load capacity of 700kg. The swivel head has a double ball race with hardened ball race track.- The Top Plate measure 105x80mm with 80x60mm Fixing Bolt Hole Centres. The bolt holes are slotted to 80/75x60/55mm and suits 8mm Bolts.
- The castor wheel is a white nylon wheel (polyamide) with a 40mm tread width and fitted with two precision ball bearings. The hard wheel is non-marking and has the lowest rolling and swivel resistance.
- This castor is an excellent all purpose heavy duty castor. It is often used with high load mobile storage and transportation equipment in domestic, mechanical and industrial applications.
- In Stock
80mm Stainless Steel Swivel Castor, 120kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS080RNB)
£19.5980mm Top Plate Swivel Castor (Stainless Steel Cast... Read Moreor) with 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 120kg - In Stock
100mm High Temperature Stainless Steel Swivel Castor, 150kg Capacity | Phenolic Wheel, Plain Bore (MSS100HT)
£29.42100mm High Temperature Top Plate Swivel Castor (St... Read Moreainless Steel Castor) with 80x60mm Bolt Hole Centres and 128mm overall height. Black Phenolic caster wheel with 35mm Tread Width and Smooth Plain Bore. Load Capacity = 150kgThis castor is rated from -40 Deg. C to +280 Deg. C and is made from AISI304 Stainless Steel with a double ball race in the swivel head. - In Stock
63mm Footmaster Castor with Levelling Foot, 500kg Capacity | 63mm Nylon Wheel, Plain Bore (KGDH65ASFNYN)
Original price was: £62.55.£38.40Current price is: £38.40. Sale!This 63mm Swivel Castor has Black Nylon wheel (pla... Read Morein bore) with an extra long adjustable foot. The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear.The Threaded section of the Adjustable Foot extends a maximum of 60mm above the top of the top plate (78mm including the hex head). The Hex Head can be operated by a drill for quick operation.The overall height of the castor is 98mm and the adjustable foot can extend by up to 48mm to enable precise levelling.The load capacity is 500kg and the recommended maximum total load to be carried by 4 castors is 1,500kg. - In Stock
125mm Swivel Castor, 200kg Capacity | Nylon Wheel, Roller Bearing (MSV125NY1B)
£10.23125mm White Nylon Wheel with a roller bearing f... Read Moreitted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 200kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.
- Out of Stock - On the Way
200mm Swivel Castor, 1100kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (TSH200PT2H)
£178.11200mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1100kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
200mm Swivel Castor, 535kg Capacity | Rubber Tyre Wheel, Ball bearing, (HKS20020341)
£93.89200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 535kg - In Stock
150mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KSCR15020241)
£56.95150mm Swivel Castor (Pressed Steel) and Crown Trea... Read Mored Polyurethane Tyred / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg - In Stock
200mm Swivel Castor, 1000kg Capacity | Nylon Wheel, Ball bearing (HKS20020111)
£113.91200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 1000kg - In Stock
100mm Swivel Castor, 225kg Capacity | Nylon Wheel, Roller Bearing (TS4100NY14)
£21.58100mm Swivel Castor (REVVO Brand) with a White Nyl... Read Moreon Wheel. The top plate measures 135mm x 110mm and the Fixing Bolt Hole Centres are 105x80mm.The castor wheel has a 35mm Tread Width with a Needle Roller Bearing and the Load Capacity is 225kg using manual propulsion at 4km/h (walking speed).The white nylon wheel is a hard tread which provides the lowest rolling resistance and maximum mobility. Being nylon the wheel is non-marking and will not damage concrete floors. - In Stock
63mm Footmaster Levelling Castor, Stem Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80S)
£46.4663mm Foot Master Levelling Castor with an M12 x 18... Read Moremm Threaded Stem finished in an ivory coloured powder coating. This product has a black Nylon Wheel with a 28mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation.This product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
50mm Swivel Castor, 55kg Capacity | Polypropylene Wheel, Plain Bore (LSV050PPBH)
£2.25This castor c... Read Moreomes with a 50mm White Polypropylene Wheel fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame). The load capacity of this castor is 55kg using manual propulsion at 4km/h.
This castor is fitted with a white polypropylene wheel that that will not damage or mark the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- Out of Stock - On the Way
150mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (661PNB)
£46.46150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 600kg - In Stock
250mm Swivel Castor, 1200kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (TSH250PT2H)
£204.49250mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1200kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
50mm Swivel Castor, 23kg Capacity | Rubber Tyre Wheel, Plain Bore (KLMP2014)
£2.4050mm Grey Rub... Read Moreber Tyre on a polypropylene (plastic) Centre Wheel fitted into a Top Plate Swivel Castor with 38x38mm bolt hole centres. The load capacity of this castor is 23kg using manual propulsion at 4km/h
This popular general, light duty purpose castor will not mark or damage the floor and is ideal for most domestic and industrial castor uses where a small yet sturdy castor in needed.
- In Stock
80mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS080NY)
£14.1580mm Top Plate Swivel Castor (Stainless Steel Cast... Read Moreor) with 80x60mm Bolt Hole Centres. Nylon castor wheel with Plain Bore. Load Capacity = 150kg - Out of Stock - On the Way
100mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (461PNB)
£22.22100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 250kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
- In Stock
125mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (DSRN12511030)
Original price was: £9.90.£9.61Current price is: £9.61. Sale!125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Hole Centres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
Swivel Castor, 75mm, 140kg Capacity, Nylon Wheel, Plain Bore (MSE075NY)
£6.9675mm Medium Duty Top Plate Swivel Castor. Nylon Wh... Read Moreeel and Plain Bore. Load Capacity = 140kgThis castor has a 105x80mm Top Plate with 80mm x 60mm Bolt Hole Centres. The overall height is 95mm.The Nylon castor wheel is a hard tread made from quality nylon. It will not damage or mark concrete floors and is not susceptible to picking up floor debris and swarf. Nylon is a popular wheel choice because it is light weight and has a high load capacity relative to other wheel materials of the same size. It is not affected by water and is insensitive to many chemicals apart from acids. - In Stock
200mm Swivel Castor, 1000kg Capacity | Cast Iron Wheel, Ball bearing (HKS20020441)
£86.71200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball bearing. Load Capacity = 1000kg - In Stock
160mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG160PCB)
£73.46160mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 500kg - Out of Stock - On the Way
125mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (1321088)
£13.84125mm Bolt Hole Swivel Castor (Pressed Steel) w... Read Moreith 10mm Bolt Hole. Polyurethane Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 150kg
This product has been discontinued. The closest alternative is our 1321768 which is the same bracket and wheel but with a roller bearing rather than a ball bearing.
- In Stock
200mm Swivel Castor, 250kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH200RN1B)
£29.84200mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Blue Rubber Tyred / Nylon Centred Wheel with Roller Bearing. Load Capacity = 250kg - In Stock
Swivel Castor (Twin Wheel), 250mm, 2800kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST250PC2B)
£594.18250mm Twin Wheel Extra Heavy Duty Fabricated Swive... Read Morel Castor. The Swivel Head Turns On Thrust and Taper Roller Bearings For Extra Strength and The Bracket Is Finished In Black Epoxy Paint.This Castor Has A Top Plate Measuring 250mm X 250mm with Bolt Hole Spacings Of 190mm X 190mm Drilled To 19mm Diameter. The Two Polyurethane Tyre on a Cast Iron Centre Wheels Each Have Ball Bearings Fitted To Reduce The Rolling Resistance.The Castor Has A 2800kg Load Rating At 4Km/H - In Stock
125mm Swivel Castor, 100kg Capacity | Polypropylene Wheel, Plain Bore (LSV125PPBH)
£7.96125mm White Polypropylene wheel fitted in a 12m... Read Morem Single Bolt Hole Swivel Castor (Pressed Steel castor frame). This castor has a 100kg load capacity using manual propulsion at 4 km/h.
This castor is fitted with a White Polypropylene wheel that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
50mm Stainless Steel Footmaster Levelling Castor, 280kg Capacity | Nylon Wheel, Plain Bore (KSGDN-60S)
Original price was: £87.27.£84.73Current price is: £84.73. Sale!50mm Footmaster castor with Stainless forged st... Read Moreeel plate and stainless casting frame, M12 x 18mm Threaded Stem Fitting. 280kg Static and 140kg Dynamic Load Capacity with Machine Cast Nylon Wheel and Vibration Damping Rubber Pad. Nylon Handwheel height adjustment Operation. This footmaster castor has an overall height of 82mm when the wheel is engaged with a total lift of 15mm using the rubber footpad.
The version of the Footmaster Levelling castor has a double ball bearing with hardened stainless steel bearings in the swivel head. The KSGDN Footmaster castor has completely corrosion-resistant components applied.
The Footmaster levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place.
Because of the lifting and lowering function of the Footmaster castor, like regular Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load for each Footmaster Castor is half the castor's Static Load Capacity of when the castor is stationary and the foot-pads are lowered.
This load capacity of the Footmaster Castor when being moved and positioned is given by the Dynamic Load Capacity.