Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 45 Products per page
- In Stock
100mm Swivel Castor, 225kg Capacity | Nylon Wheel, Plain Bore (TS4100NY04)
£19.50100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 225kg - In Stock
125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321010)
£8.45125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
35mm Compact Swivel Castor, 100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS035PT2BBH)
£9.9435mm Low Level swivel castor with 10mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 50mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321720)
£8.24100mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSVH125NY1B)
£9.11125mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Nylon Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
200mm Swivel Castor, 350kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV200PN2B)
£35.42200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 350kg - In Stock
42mm Footmaster Levelling Castor, Plate Fitting, 60kg Capacity | 42mm Nylon Wheel (KGD-40F)
£21.0842mm Foot Master Levelling Castor with an ivory... Read More coloured powder coating finish. This product has a 4-hole top plate with 42mm x 42mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 20mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation
This product's load capacity has increased to 60kg Static Load and 30kg Dynamic Load.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
- In Stock
100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV100RN2B)
£10.14100mm Swivel Castor bracket (Pressed Steel) fitted... Read More with a Blue Elastic Rubber Tyre on a nylon centre wheel with a ball bearing. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 160kg using manual propulsion at 4km/h (walking speed)The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products.This castor is often used on flight cases as well as in many medical, industrial and domestic applications. - In Stock
100mm Swivel Castor, 350kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KSMG100PCB)
£40.30100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 350kg - Out of Stock - On the Way
75mm Swivel Castor, 80kg Capacity | Nylon Wheel, Plain Bore (2KS075PPBH)
£7.4275mm Twin Wheel Single Bolt Hole Swivel Castor (Pr... Read Moreessed Steel) with 10mm Fixing Hole and 99mm overall height. Black Polypropylene Wheel with Plain Bore and a Load Capacity of 80kg - In Stock
200mm Swivel Castor, 450kg Capacity | Rubber Tyre Wheel, Roller Bearing (822RNB)
£60.16200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Blue Elastic Rubber Tyre wheel on a Nylon Centre with a Needle Roller Bearing. Load Capacity = 450kg - In Stock
125mm Swivel Castor, 300kg Capacity | Nylon Wheel, Ball Bearing (MSK125NY2B)
£21.60125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres and 157mm Overall Height. Nylon Wheel with Ball Bearings. Load Capacity = 300kg.This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications. The nylon wheel is insensitive to water and will not mark or damage most flooring. - In Stock
125mm Stainless Steel Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS125RNB)
£32.93125mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
125mm Fixed Castor, 400kg Capacity | Nylon Wheel, Ball Bearing (KF125NYBJ400)
£34.04125mm Fixed Castor (Heavy Duty Pressed Steel) with... Read More a 135mm x 110mm Top Plate with 105x80mm Fixing Hole spacings. The castor wheel is a Solid White Nylon Castor Wheel with two ball bearings. Load Capacity = 400kg - Out of Stock - On the Way
200mm Swivel Castor, 500kg Capacity | Nylon wheel, Roller Bearing (MSK200NY1B)
£33.98200mm Heavy Duty Swivel Castor (Pressed Steel) wit... Read Moreh 105x80mm Fixing Bolt Hole Centres. This castor has an overall height of 240mm and houses a White Nylon Wheel with a 50mm Tread Width and a Needle Roller Bearing. The Load Capacity is 500kg using manual propulsion at 4km/w (walking speed). - In Stock
63mm Stainless Steel Footmaster Levelling Castor, 550kg Load Capacity (KSGDN-80S)
Original price was: £133.69.£129.80Current price is: £129.80. Sale!63mm Footmaster castor with Stainless forged steel... Read More plate and stainless casting frame, M12 x 18mm Threaded Stem Fitting. 550kg Static Load and 275kg Dynamic Capacity with Machine Cast Nylon Wheel and Vibration Damping Rubber Pad. Nylon Handwheel height adjustment Operation. This footmaster castor has an overall height of 103mm when the wheel is engaged with a total lift of 15mm using the rubber footpad.The version of the Footmaster Levelling castor has a double ball bearing with hardened stainless steel bearings in the swivel head. The KSGDN Footmaster castor has completely corrosion-resistant components applied.The Footmaster levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place.Because of the lifting and lowering function of the Footmaster castor, like regular Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load for each Footmaster Castor is half the castor's Static Load Capacity of when the castor is stationary and the foot-pads are lowered.This load capacity of the Footmaster Castor when being moved and positioned is given by the Dynamic Load Capacity. - In Stock
100mm Swivel Castor with 21.5mm to 24mm Expander Fitting, 100kg Capacity | Rubber Tyre Wheel, Ball Bearing (194551)
Original price was: £7.30.£7.09Current price is: £7.09. Sale!... Read Morefont-weight: bold;">Excess Project Stock: 100mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) complete with a 21.5mm - 24.5mm Round Expander. The swivel head has a double ball race and the load capacity of this castor is 100kg using manual propulsion at 4km/h.
The expander fitting is designed to fit into an round hollow tube with an internal diameter of 21.5mm to 24.5mm.
This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance.
- In Stock
240mm Swivel Castor 150kg Load Capacity, Puncture Proof, Pressed Steel Bracket (KS260EVA)
£93.09240mm Puncture Proof Swivel Castor (Pressed Steel)... Read More with 200X160mm Top Plate Dimensions and 150X115mm Fixing Bolt Hole Centres. This Castors has an Overall Height of 297mm. The wheel has an 85mm Tread Width and Roller Bearing. Load Capacity = 150kg. - In Stock
200mm Swivel Castor, 535kg Capacity | Rubber Tyre Wheel, Ball Bearing, (TSH200RU2H)
£133.07200mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 535kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- Out of Stock - On the Way
125mm Swivel Castor, 1500kg Capacity | Cast Nylon Wheel, Ball bearing (GXT125ASFMCD)
Original price was: £351.67.£228.59Current price is: £228.59. Sale!125mm Machine... Read More Cast Nylon Wheel fitted into an extra strong Fabricated Top Plate Swivel Castor with 148/132x111/99mm bolt hole centres. The slotted bolt holes cover the European and UK standard 140x105mm bolt holes. The load capacity of this castor is 1500kg at 4km/h
This high performance castor is fitted with a white machine cast nylon wheel that will not mark the floor. An extra strong welded castor frame that is powder coated and fitted with a high performance castor wheel containing two ball bearings that turns on a specially designed integrated axle shaft arrangement makes this castor one of the most durable in the market. Perfect for moving very heavy loads where strength, durability and performance are critical
The swivel head of the 125mm - 250mm sizes of the GXT range come with a thrust bearing and a taper roller bearing in the swivel head.
- In Stock
150mm Swivel Castor, 1020kg Capacity | Cast Iron Wheel, Roller Bearing (655CIB)
£81.85150mm Top Plate Swivel Castor. The 4 hole top p... Read Morelate measures 162mm x 140mm with 140mm x 105mm Bolt Hole Centres. to suit a 10mm Fixing Bolt. The wheel is a solid Cast Iron with a needle roller bearing. Load Capacity = 1020kg.
The 55 series castor is made from heavy duty pressed steel with a bright zinc finish and roller ball bearing in the swivel head.
- In Stock
100mm Swivel Castor, 340kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (TSH100PT2H)
£100.17100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor Bracket) with 105x80mm Fixing Hole Centres. The castor houses a Polyurethane Tyre Wheel on a Cast Iron Centre with two quality Ball Bearings for extremely low rolling resistance on heavy loads. The load capacity of this 100mm castors is 340kg.
Features of the Revvo H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
125mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS125NYBH)
£26.40125mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg - In Stock
200mm Swivel Castor, 200kg Capacity | Nylon Wheel, Roller Bearing (MSVH200NY1B)
£21.18200mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Nylon Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
100mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS100PNBBH)
£22.90100mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
125mm Swivel Castor, 100kg Capacity | Thermoplastic Rubber Wheel, Ball Bearing (KATS125TPR)
£7.60Keystone Appa... Read Moreratus / Institutional Castor with 125mm Grey Thermoplastic Wheel fitted into a Pressed Steel Top Plate Swivel Castor with slotted bolt hole centres measuring 61.5/56 x 51.5/46.5 mm. The load capacity of this castor is 100kg using manual propulsion at 4km/h
Running on a quality ball bearing the wheel offers excellent rolling performance. This popular apparatus castor is a great choice for a wide range of industrial and domestic applications such as trolley and garment rails, medical devices and hospitality equipment. Fitted with a grey thermoplastic wheel on a polypropylene centre this wheel is non-marking and gentle on floors and has a large plastic thread guard to protect the ball bearing from dirt ingress
- In Stock
100mm Swivel Castor, 225kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TS4100PT14)
£39.45100mm Top Plate Swivel Castor (Pressed Steel). Wit... Read Moreh a top plate of 135x110mm and 105x80mm bolt hole centres, this castor has a larger top plate than most 100mm castors. The wheel is a Revvo 100PT14 which is a Polyurethane Tyre on a Cast Iron Wheel complete with Needle Roller Bearing. Load Capacity = 225Kg - In Stock
50mm Stainless Steel Swivel Castor, 50kg Capacity | Thermoplastic Rubber Wheel, Plain Bore (SKATS050TPR)
£7.87This Stainless Steel apparatus / institutional swi... Read Morevel castor comes with a 50mm Grey Thermoplastic Rubber Tyre Wheel on a polypropylene centre with a smooth plain bore. The swivel bracket has a 60x60mm 4 hole Top Plate with slotted fixing bolt holes at 48/39x48/39mm. The load capacity of this castor is 50kg using manual propulsion at 4km/hThe grey Thermoplastic Rubber Tyre Wheel will not mark or damage the floor and is ideal for most general castor purposes such as trolley castors or dolly castors.Download Series Data Sheet here - In Stock
160mm Swivel Castor, 200kg Capacity | Polypropylene Wheel, Plain Bore (LSV160PP)
£14.30160mm Top Plate swivel Castor with a White Polypro... Read Morepylene wheel. It has 105x80mm fixing bolt hole centres and the load capacity is 200kg using manual propulsion at 4km/h.This is one of our most popular castors and the White Polypropylene wheel is non-marking and won’t damage concrete floors. Because it is a hard tread it has the lowest rolling and swivelling resistance. It is ideal as a new component or a replacement caster for most general purpose domestic or industrial castor where the travel speed of the castor generally does not exceed walking speed. - In Stock
50mm Footmaster Levelling Castor, Plate Fitting, 280kg Capacity | Nylon Wheel (KGD-60FBLACK)
£30.4350mm Foot Master Levelling Castor with a black ... Read Morepowder coating finish. This product has a 4-hole top plate with 58mm x 58mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 25mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operation
This product's load capacity has increased to 280kg Static Load and 140kg Dynamic Load.
Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.
This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features.
- Out of Stock - On the Way
100mm Swivel Castor, 295kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (461SUB)
£38.13100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 295kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating. This range has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
- In Stock
150mm Swivel Castor, 1100kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (2HKSE15020241)
£195.71150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor - Twin Wheel). The Top Plate measures 149x110mm with 105x80mm Fixing Hole Centres. A grease nipple is fitted to the swivel head to enable easy maintenance. The load capacity of this dual wheel castor is 1100kg.This castor has directional lock slots in the swivel head to enable the attachment of a retro fit directional lock (HKDL).The overall height of this castor is 238mm.The Wheel has a Polyurethane Tyre (92 Shore A) on a Cast Iron Centre Wheel with Ball Bearings. The polyurethane tyre is abrasion resistant with a low rolling resistance. The elasticity of the polyurethane allows the wheel absorb some of the rolling vibrations. This provides the user with a smoother and quieter operation yet is gentler on concrete floors compared to hard treads such as Cast Iron. - In Stock
150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Plain Bore (661RN)
£38.32150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 300kg - In Stock
50mm Swivel Castor, 50kg Capacity | Polypropylene Wheel, Plain Bore (LSV050PP)
£2.1950mm White Polyp... Read Moreropylene Wheel fitted into a Top Plate Swivel Castor with 36x36mm bolt hole centres. The load capacity of this castor is 50kg using manual propulsion at 4km/hThis popular general purpose castor is fitted with a hard white polypropylene wheel that will not mark or damage the floor. Because this wheel is a hard tread it will offer less rolling and swivelling resistance than a soft rubber tread. This castor is ideal for most domestic and industrial, light duty castor uses where a small yet sturdy castor in needed. - In Stock
160mm Swivel Castor, 200kg Capacity | Nylon Wheel, Roller Bearing (MSVH160NY1B)
£17.09160mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel) and Nylon Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (KS150RNB300)
£50.36150mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 105x80 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 300kg - In Stock
63mm Footmaster Levelling Castor, Stem Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80SBLACK)
£46.4663mm Footmaster Levelling Castor with an M12 x 18m... Read Morem Threaded Stem finished in Finished with a Black powder coating. This product has a black Nylon Wheel with a 28mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation.This product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load.Because of the lifting and lowering function of the Footmaster Levelling castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
50mm Swivel Castor, 50kg Capacity | Polypropylene Wheel, Plain Bore (LSM050PP)
£3.0850mm Swivel Castor with a 4 hole top plate and 48/... Read More38x48/38mm bolt hole centres to suit 6mm fixing bolts. The wheel is Black Polypropylene with Plain Bore. Load Capacity = 50kg - In Stock
100mm Swivel Castor, 250kg Capacity | Nylon Wheel, Plain Bore (LSV100NY250)
Original price was: £7.60.£7.38Current price is: £7.38. Sale!100mm Top Plate ... Read MoreSwivel Castor with a White Nylon Wheel. The Top Plate measures 102mm x 84mm and has 80x60mm fixing bolt hole centres and an overall height of 128mm. The wheel has a tread width of 35mm, a smooth plain bore and the load capacity of this castor is 250kg using manual propulsion at 4km/hThis popular general purpose castor is fitted with a White Nylon wheel that is non-marking and won't damage concrete floors making it ideal for most general purpose domestic or industrial castor. - In Stock
100mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (MSV100NY2B)
£8.45100mm White Nylon Wheel with a ball bearing fit... Read Moreted into a pressed steel swivel castor bracket. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Nylon Wheel is a hard wheel giving it a low tractive resistance which makes it it easier to get moving compared with softer rubber tread wheels. The strength of nylon and because it wont damage concrete floors makes it one of the most popular choices. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head makes this castor a great choice for the widest range of industrial and domestic applications.</p>
- In Stock
125mm Swivel Castor, 630kg Capacity | Cast Iron Wheel, Roller Bearing (TSH125CI1H)
£85.54125mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 630kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- Out of Stock - On the Way
250mm Swivel Castor, 1150kg Capacity | Cast Iron Wheel, Ball bearing (HKS25025441)
£119.68250mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball bearing. Load Capacity = 1150kg - In Stock
125mm Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSV125PN1B)
£14.79125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
125mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (1321038)
£13.70125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 150kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
260mm Fixed Castor, 120kg Capacity | Puncture Proof Wheel, Roller Bearing (KF260PPD)
£91.20260mm Puncture Proof Fixed Castor (Pressed Steel) ... Read Morewith 150x115mm Fixing Bolt Hole Centres. Diamond Tread Puncture Proof Wheel on a Red Polypropylene (Plastic) Centre with a Roller Bearing. Load Capacity = 120kgThe wheel is sized 3.00-4 and made from microcellular polyurethane making it a strong Light-Medium duty wheel and though it has a 10" diameter, it is also commonly referred to as a 260mm wheel.