Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
- Out of Stock - On the Way
200mm Swivel Castor, 400kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG200EAB)
£41.82200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Black Rubber Tyre / Aluminium Centre Wheel with Ball Bearing. Load Capacity = 400kg - In Stock
125mm Swivel Castor, 325kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (561SUB)
£50.03125mm Top Plate Swivel Castor made from Pressed St... Read Moreeel (Flexello Brand) and has a ball bearing swivel race. The Top Plate has four fixing holes to suit 10mm bolts and are slotted to 140/120mm x 105/95mm Bolt Hole Centres. The caster wheel has a Red Polyurethane Tyre on a Cast Iron Centre Wheel with with A 35mm Tread Width and a Needle Roller Bearing. Load Capacity = 325kg - In Stock
160mm Swivel Castor, 200kg Capacity | Nylon Wheel, Roller Bearing (MSVH160NY1B)
£17.09160mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel) and Nylon Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
80mm Stainless Steel Swivel Castor, 120kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS080RNB)
£19.5980mm Top Plate Swivel Castor (Stainless Steel Cast... Read Moreor) with 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 120kg - In Stock
125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Roller Bearing (KS125RNB180)
£42.49125mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 80x60 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 180kg - In Stock
160mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH160RN1B)
£22.44160mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Blue Rubber Tyred / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
125mm Swivel Castor, 180kg Capacity | Rubber Tyre Wheel, Plain Bore (561RN)
£32.23125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Plain Bore. Load Capacity = 180kg - In Stock
75mm Heavy Duty Swivel Castor, 300kg Capacity | White Nylon Wheel, Ball Bearing (HSV075NY2B)
£23.4775mm Heavy Duty Top Plate Swivel Castor with Heavy... Read More Gauge Pressed Steel and a load capacity of 300kg. The swivel head has a double ball race with hardened ball race track.- The Top Plate measure 105x80mm with 80x60mm Fixing Bolt Hole Centres. The bolt holes are slotted to 80/75x60/55mm and suits 8mm Bolts.
- The castor wheel is a white nylon wheel (polyamide) with a 32mm tread width and fitted with two precision ball bearings. The hard wheel is non-marking and has the lowest rolling and swivel resistance.
- This castor is an excellent all purpose heavy duty castor. It is often used with high load mobile storage and transportation equipment in domestic, mechanical and industrial applications.
- In Stock
35mm Compact Swivel Castor, 100kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS035PT2BBH)
£9.9435mm Low Level swivel castor with 10mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 50mm and an Orange Polyurethane Wheel on a steel centre with a 27mm Tread Width and Ball bearings. Load Capacity = 100kg - In Stock
50mm Low Level Swivel Castor, 160kg Capacity | Polyurethane Tyre Wheel, Plain Bore (2SL050PT0L)
Original price was: £24.46.£23.75Current price is: £23.75. Sale!50mm Low Level Twin Wheel Swivel Castor (REVVO Bra... Read Morend). The Polyurethane tyre wheels have a tread width of 14mm each and turn on a smooth Plain Bore. The Load Capacity of 160kg.This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes) - Out of Stock - On the Way
150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG150EAB)
£37.36150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Fixing Bolt Hole Centres. Black Rubber Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 300kg - Out of Stock - On the Way
300mm Swivel Castor, 4080kg Capacity | Polyurethane Tyre Wheel, Taper Roller (EH312SUTM)
£1,309.22Extra Heavy Duty Swivel Castor with 300mm Polyu... Read Morerethane Tyre Cast Iron wheel on taper roller bearings. The swivel head contains double taper roller bearings which means it is suited to very heavy applications and with a grease nipple in the swivel head enables re-greasing. The bracket is fabricated forge steel and coated with a black electrostatic finish. The load capacity of this castor is 4,080kg and is suitable for power towing,
The castor has an overall height of 422mm and the top plate measures 178mm x 153mm with bolt hole centres of 127mm x 102mm that are suitable for 16mm bolts, The swivel radius of the castor is the radius of the circle the outer dimension of the wheel would make when swivelling in a stationary position. This is 222mm for this product.
- In Stock
200mm Swivel Castor, 1000kg Capacity | Nylon Wheel, Ball bearing (HKS20020111)
£113.91200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 1000kg