Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock300mm Swivel Castor, 1800kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (KS300PCB1800A)
£306.76300mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 160x120 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1800kg- In Stock
160mm Stainless Steel Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSS160RNB)
£57.33160mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 105x80 Hole Centres. Blue Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg - In Stock
160mm Swivel Castor, 500kg Capacity | Nylon Wheel, Plain Bore (MSK160NY)
£22.28160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Nylon Wheel with a Smooth Plain Bore. Load Capacity = 500kg. - In Stock
75mm Swivel Castor, 170kg Capacity | Nylon Wheel, Plain Bore (361NYST)
£14.0675mm Stem Fitting Swivel Castor (Flexello Pressed ... Read MoreSteel) with M12x25mm Threaded Stem. The castor houses a white Nylon Wheel with Plain Bore. Load Capacity = 170kg.The Nylon castor wheel is a hard tread made from quality nylon. It will not damage or mark concrete floors and is not susceptible to picking up floor debris and swarf. Nylon is a popular wheel choice because it is light weight and has a high load capacity relative to other wheel materials of the same size. It is not affected by water and is insensitive to many chemicals apart from acids. - In Stock
50mm Swivel Castor, 55kg Capacity | Polypropylene Wheel, Plain Bore (LSV050PPBH)
£2.33This castor c... Read Moreomes with a 50mm White Polypropylene Wheel fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame). The load capacity of this castor is 55kg using manual propulsion at 4km/h.
This castor is fitted with a white polypropylene wheel that that will not damage or mark the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
200mm Swivel Castor, 800kg Capacity, Nylon Wheel, Ball Bearing (KS200NYBJ800)
£81.48200mm Swivel Castor (Heavy Duty Pressed Steel) wit... Read Moreh a 135mm x 110mm Top Plate and 105x80mm Fixing Bolt Hole spacings. The castor wheel is a Solid White Nylon with two shielded ball bearings. Load Capacity = 800kg- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- Being a hard tread it offers the lowest rolling resistance and easiest mobility.
- This castor is a popular choice in a wide variety of heavy-duty applications and the Nylon wheel will not damage or mark concrete floors
- The castor wheel is a heavy-duty polyamide 6 (usually referred to as nylon) wheel with shielded ball bearing and is not affected by water.
- In Stock
160mm Swivel Castor, 480kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK160PN2B)
£35.60160mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Red Polyurethane Tyre on a White Nylon Centre Wheel with Ball Bearings. Load Capacity = 480kg. - Out of Stock - On the Way
150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (KS150RNB300)
£39.10150mm Top Plate Swivel Castor with 105x80mm Hole C... Read Moreentres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg.Blue elastic rubber tyre caster wheels offer a higher load capacity over standard grey or black rubbers and will not mark floors. - In Stock
50mm Low Level Swivel Castor, 270kg Capacity | Steel Wheel, Plain Bore (2SL050ST0L)
£28.7650mm Low Level Twin Wheel Swivel Castor (Revvo Bra... Read Morend). The steel wheels each have a tread width of 14mm and turn on a smooth Plain Bore. The Load Capacity of 270kg.This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes) - In Stock
160mm Swivel Castor, 200kg Capacity | Nylon Wheel, Roller Bearing (MSVH160NY1B)
£17.69160mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel) and Nylon Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
50mm Footmaster Levelling Castor, Stem Fitting, 280kg Capacity | Black Nylon Wheel (KGD-60S)
£33.61M12 x 18mm Threaded Stem Fitting Foot Master Level... Read Moreling Castor with an ivory coloured powder coating finish. This product has a black Nylon Wheel with a 25mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation.This product's load capacity has increased to 280kg Static Load and 140kg Dynamic Load.Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each of these castors is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (Flexello 461RNB)
£25.48100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80mm Bolt Hole Centres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel fitted with a Roller Bearing. Load Capacity = 160kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating and has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
The Blue Elastic Rubber offers a higher load capacity over standard grey or black rubber tyres and will not mark floors. The roller bearing consists of steel rollers in a plastic cage that minimise rolling resistance even under heavy loads.
- In Stock
100mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (422SUB)
£43.60100mm Top Plate Swivel Castor (Flexello - Pressed ... Read MoreSteel) with 80x60mm Fixing Bolt Hole Centres. Red Polyurethane Tyre on a Red Painted Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 250kg. - In Stock
100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH100RN1B)
£9.53100mm Blue Elastic Rubber Tyre wheel on a nylon... Read More centre with a roller bearing fitted into a pressed steel single bolt hole swivel castor bracket to suit a 12mm bolt. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a truly great performer.
- In Stock
150mm Swivel Castor (Powder Coated), 700kg Capacity | Polyurethane Tyre Wheel (KGHP150ASFMUD)
Original price was: £137.41.£79.66Current price is: £79.66.Sale!150mm Heavy-duty Swivel Castor with a Powder Coate... Read Mored Pressed Steel Bracket and a 200mm overall height. The caster wheel has a Blue Polyurethane Tyre (Shore A 95) on an Aluminium Centre with Ball BearingsFeatures:- 700kg Load Capacity: For the most demanding applications and heavy-duty loads.
- Silver/Grey Powder Coating: Making this the best looking heavy-duty industrial castor on the market. The powder-coating not only looks great but also provides corrosion protection which prolongs its optimal performance and keeps the castor looking good.
- Quality Ball Bearings: For the lowest rolling resistance to reduce the effort needed to move.
- Double Ball Bearing Race and hardened bearing Seats in the swivel head: For an optimum swivel rotation function and durability.
- Strong Pressed Steel Plate: The top plate measure 140x110mm with fixing bolt holes slotted to 105x80/75mm to suit 10mm bolts
- Precision Engineered: These castors have an incredibly smooth swivelling function with no "rock" to the swivel head and no sideways movement on the wheel for exceptional operating performance.
