Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Sort by Average rating
- Display 15 Products per page
In Stock100mm Swivel Castor, 320kg Capacity | Cast Iron Wheel, Roller Bearing (TSH100CI1H)
£83.46100mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Cast Iron Wheel with Roller Bearing. Load Capacity = 320kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
100mm Swivel Castor, 225kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (TS4100PT14)
£40.84100mm Top Plate Swivel Castor (Pressed Steel). Wit... Read Moreh a top plate of 135x110mm and 105x80mm bolt hole centres, this castor has a larger top plate than most 100mm castors. The wheel is a Revvo 100PT14 which is a Polyurethane Tyre on a Cast Iron Wheel complete with Needle Roller Bearing. Load Capacity = 225Kg - In Stock
100mm Swivel Castor, 225kg Capacity | Polyurethane Tyre Wheel, Plain Bore (TS4100PT04)
£36.95100mm Top Plate Swivel Castor (Pressed Steel). Wit... Read Moreh a top plate of 135x110mm and 105x80mm bolt hole centres, this castor has a larger top plate than most 100mm castors. The wheel is a Revvo 100PT14 which is a Polyurethane Tyre on a Cast Iron Wheel with smooth Plain Bore. Load Capacity = 225Kg - In Stock
75mm Swivel Castor, 500kg Capacity | Nylon Wheel, Ball bearing (PH75NSF)
Original price was: £37.12.£34.81Current price is: £34.81.Sale!75mm Low Level Swivel Castor with 78/64x78/64mm... Read More slotted bolt holes and a 500kg Load Capacity. This castor has a black painted finish and is fitted with an extra heavy duty Cast Nylon Wheel that turns on ball bearings.
This castor is ideal for heavy duty applications where there is an height restriction and the White nylon wheel is non-marking and wont damage concrete floors.
- In Stock
200mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH200PN1B)
£31.14200mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Red Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 250kg - In Stock
200mm Swivel Castor, 200kg Capacity | Nylon Wheel, Roller Bearing (MSVH200NY1B)
Original price was: £22.86.£14.86Current price is: £14.86.Sale!200mm Swivel Castor with a 12mm Single Bol... Read Moret Hole fixing. The castor wheel is a white nylon with a needle roller bearing and thread guard fitted. The Load Capacity is 200kg using manual propulsion at 4km/h (walking speed)Key Specifications- Bolt Hole Size: 13mm (to suit a 12mm fixing bolt)
- Overall Height: 228mm
- Wheel Tread Width: 50mm
- Castor Offset: 55mm
- Load Capacity: 200kg
- In Stock
160mm Swivel Castor, 200kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH160RN1B)
£23.23160mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Blue Rubber Tyred / Nylon Centre Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
160mm Swivel Castor, 200kg Capacity | Nylon Wheel, Roller Bearing (MSVH160NY1B)
£17.69160mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel) and Nylon Wheel with Roller Bearing. Load Capacity = 200kg - In Stock
125mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH125RN1B)
£12.06125mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Blue Elastic Rubber Tyre / Nylon Centred Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
100mm Swivel Castor, 225kg Capacity | Nylon Wheel, Roller Bearing (TS4100NY14)
£22.34100mm Swivel Castor (REVVO Brand) with a White Nyl... Read Moreon Wheel. The top plate measures 135mm x 110mm and the Fixing Bolt Hole Centres are 105x80mm.The castor wheel has a 35mm Tread Width with a Needle Roller Bearing and the Load Capacity is 225kg using manual propulsion at 4km/h (walking speed).The white nylon wheel is a hard tread which provides the lowest rolling resistance and maximum mobility. Being nylon the wheel is non-marking and will not damage concrete floors. - In Stock
100mm Swivel Castor, 225kg Capacity | Nylon Wheel, Plain Bore (TS4100NY04)
£20.19100mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 225kg - In Stock
75mm Swivel Castor, 160kg Capacity | Nylon Wheel, Plain Bore (TS4075NY04)
£19.8075mm Top Plate Swivel Castor (Pressed Steel) wi... Read Moreth a 135x110mm top plate and 105X80mm Bolt Hole Centres. This castor is fitted with a Nylon Wheel with a smooth Plain Bore. Load Capacity = 160kg
This castor's feature is that it has a higher load capacity and larger top plate than most 75mm swivel castors.
- In Stock
125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Roller Bearing (MSVH125NY1B)
£9.43125mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Nylon Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
100mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Roller Bearing (MSVH100RN1B)
£9.53100mm Blue Elastic Rubber Tyre wheel on a nylon ce... Read Morentre with a roller bearing fitted into a pressed steel single bolt hole swivel castor bracket to suit a 12mm bolt. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)Key Specification:- Bolt Hole Size: 13mm (to suit 12mm Fixing Bolt)
- Overall Height: 127mm
- Offset: 40mm
- Swivel Radius: 90mm
- Tread width: 35mm
- Bearing Type: Roller Bearing
- Tyre Hardness: Shore A 65
- High Load Capacity
- Low Rolling Resistance
- Non-Marking & Gentle on Floors
- Reduce Vibration
- Low noise Operation
- In Stock
100mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH100PN1B)
£8.28100mm Red Polyurethane Tyre Wheel on a Nylon Ce... Read Morentre with a roller bearing fitted into a single bolt hole pressed steel swivel castor bracket. The Swivel Bracket has 12mm single bolt hole. The load capacity of this castor is 150kg using manual propulsion at 4km/h (walking speed)
The Polyurethane tyre offers a low tractive resistance making it easier to get moving compared with softer rubber tread wheels. It is also a bit softer than hard tread wheels making the castor smoother and quieter running. The polyurethane tyre is also non-marking and gentle on floors while the roller bearing lowers the rolling resistance to reduce the effort required to move the castors. Put this wheel into a strong bracket that has a double ball race in the swivel head and you have a castor that is a great choice for the wide range of industrial and domestic applications.
