Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock125mm Swivel Castor, 250kg Capacity | Rubber Tyre Wheel, Ball Bearing, (KSMG125EAB)
£38.31125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith with 105x80mm Fixing Bolt Hole Centres. This castor is fitted with a Black Elastic Rubber Tyre on an Aluminium Centre Wheel with Ball Bearings. Load Capacity = 250kg using manual propulsion at 4km/h (walking speed).Key Specifications & Features- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Bearing Type: Ball Bearing
- Load Capacity: 250kg (manual propulsion at 4km/h)
- Elastic rubber tyre castor wheels have a higher load capacity and lower rolling resistance (easier to get moving) than normal rubber tyre. They have a high resistance to wear and offer excellent running and operating comfort.
- In Stock
160mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV160RMB)
£13.52160mm Top Plate Swivel Castor with a Black Rubber ... Read MoreTyre Wheel on a Pressed Steel centre complete with Thread Guards. It has 105x80mm bolt hole centres and a load capacity of 160kg using manual propulsion at 4km/h.This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. - In Stock
100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (Flexello 461RNB)
£25.48100mm Top Plate Swivel Castor (Flexello 61 Seri... Read Morees) with 105x80mm Bolt Hole Centres. Blue Elastic Rubber Tyre on a Nylon Centre Wheel fitted with a Roller Bearing. Load Capacity = 160kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating and has a larger top plate than most 100mm castors with the castor's top plate measuring 128x102mm.
The Blue Elastic Rubber offers a higher load capacity over standard grey or black rubber tyres and will not mark floors. The roller bearing consists of steel rollers in a plastic cage that minimise rolling resistance even under heavy loads.
- In Stock
75mm Swivel Castor, 70kg Capacity | Polypropylene Wheel, Plain Bore (LSV075PPBH)
£3.66This castor c... Read Moreomes with a 75mm White Polypropylene Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame). The load capacity of this castor is 70kg using manual propulsion at 4km/h
This castor is fitted with a white polypropylene wheel that will not mark or damage concrete floors and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
75mm Swivel Castor, 75kg Capacity | Thermoplastic Rubber Wheel, Ball Bearing (KATS075TPR)
£3.77Keystone Appa... Read Moreratus / Institutional Castor with 75mm Grey Thermoplastic Wheel fitted into a Pressed Steel Top Plate Swivel Castor with slotted bolt hole centres measuring 48/39x48/39mm. The load capacity of this castor is 75kg using manual propulsion at 4km/h
Running on a quality ball bearing the wheel offers excellent rolling performance. This popular apparatus castor is a great choice for a wide range of industrial and domestic applications such as trolley and garment rails, medical devices and hospitality equipment. Fitted with a grey thermoplastic wheel on a polypropylene centre this wheel is non-marking and gentle on floors and has a large plastic thread guard to protect the ball bearing from dirt ingress
- In Stock
150mm Swivel Castor, 100kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHS150TPR)
£15.29This apparatu... Read Mores / institutional castor comes with a 150mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with a double ball race swivel head. The load capacity of this castor is 100kg using manual propulsion at 4km/h
This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance.
Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
200mm Swivel Castor, 1100kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (TSH200PT2H)
£184.35200mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1100kgThe Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm.- Use 12mm diameter bolts when fitting at 120 x 60mm
- Use 10mm diameter bolts when fitting at 105x80/75mm
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
250mm Swivel Castor, 1200kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (TSH250PT2H)
£211.65250mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearing. Load Capacity = 1200kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
150mm Swivel Castor, 100kg Capacity | Thermoplastic Rubber Wheel, Ball Bearing (KATS150TPR)
£10.04Keystone Appa... Read Moreratus / Institutional Castor with 150mm Grey Thermoplastic Wheel fitted into a Pressed Steel Top Plate Swivel Castor with slotted bolt hole centres measuring 61.5/56 x 51.5/46.5 mm. The load capacity of this castor is 100kg using manual propulsion at 4km/h
Running on a quality ball bearing to offer excellent rolling performance, this popular apparatus castor is a great choice for a wide range of industrial and domestic applications such as trolley and garment rails, medical devices and hospitality equipment. Fitted with a grey thermoplastic wheel on a polypropylene centre this wheel is non-marking and gentle on floors.The wheel has a large plastic thread guard to protect the ball bearing from dirt ingress
- In Stock
125mm Swivel Castor, 350kg Capacity | Nylon Wheel, Ball Bearing (KSMG125NYB)
£35.14125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Fixing Bolt Hole Centres. White Nylon Wheel with Ball Bearings. Load Capacity = 350kgKey Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Bearing Type: Ball Bearing
- Load Capacity: 350kg (manual propulsion at 4km/h)
- Nylon castor wheels have a hard tread making them one of the easiest to move (Low tractive resistance). They have a high load capacity, are low maintenance and extremely resistant to water, salts, greases, acids and alkalis.
- Out of Stock - On the Way
125mm Swivel Castor, 85kg Capacity | Rubber Tyre Wheel, Ball Bearing (1321104)
£14.71125mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Grey Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 85kg - In Stock
50mm Swivel Castor, 60kg Capacity | Polypropylene wheel, Plain Bore (2KS050PPPL)
£6.1850mm Twin Wheel Top Plate Swivel Castor (Pressed S... Read Moreteel) with 38.5/48x38.5/48mm Fixing Holes. Black Polypropylene Wheel with Plain Bore. Load Capacity = 60kg - Out of Stock - On the Way
125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Ball Bearing (1321108)
£10.52125mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Ball Bearing. Load Capacity = 150kg - In Stock
200mm Swivel Castor, 1000kg Capacity | Polyurethane Tyre Wheel, Ball bearing (HKS20020241)
£137.90200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 1000kg - In Stock
125mm Swivel Castor, 100kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV125RPBH)
£6.91125mm Grey Rubber Tyre on a nylon centre wheel fit... Read Moreted in a 12mm Single Bolt Hole Swivel Castor (Pressed Steel castor frame). This castor has a 100kg load capacity using manual propulsion at 4 km/h.This castor is fitted with a grey rubber tyre that will not mark the floor and is ideal for most general castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
