Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock100mm Swivel Castor, 270kg Capacity | Nylon Wheel, Ball Bearing (KSMG100NYB)
£33.02100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a 4 hole top plate fitting and 105x80mm Bolt Hole Centres. This castor houses a Nylon Wheel with Ball Bearing. Load Capacity = 270kg using manual propulsion at 4km/h (walking speed),Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Offset: 35mm
- Bearing Type: Ball Bearing
- Load Capacity: 270kg (manual propulsion at 4km/h)
- Nylon castor wheels have a high load capacity at a low cost. They are maintenance free and extremely resistant to water, salts, greases, acids and alkalis
- In Stock
100mm Swivel Castor with 24mm to 27mm Round Expander Fitting, 80kg Capacity | Rubber Tyre Wheel (194557)
£13.49100mm Grey Therm... Read Moreoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) complete with a 24mm - 27mm Round Expander. The swivel head has a double ball race and the load capacity of this castor is 80kg using manual propulsion at 4km/h.The expander fitting is designed to fit into an round hollow tube with an internal diameter of 24mm to 27mm.This castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance. - Out of Stock - On the Way
125mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (1321088)
£14.33125mm Bolt Hole Swivel Castor (Pressed Steel) w... Read Moreith 10mm Bolt Hole. Polyurethane Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 150kg
This product has been discontinued. The closest alternative is our 1321768 which is the same bracket and wheel but with a roller bearing rather than a ball bearing.
- In Stock
75mm Swivel Castor, 170kg Capacity | Cast Iron Wheel, Plain Bore (361CI)
£11.8075mm Top Plate Swivel Castor (Flexello 61 Serie... Read Mores) with 80x60mm Hole Centres. Cast Iron Wheel with Plain Bore. Load Capacity = 170kg
The Flexello 61 Series is an established industry standard range of Pressed Steel Castors that is suitable for most industrial castor uses. This range has a ball bearing swivel head and finished with a bright zinc plating.
- In Stock
50mm Compact Swivel Castor, 200kg Capacity | 50mm Nylon Wheel, Ball bearing (KS050NYBJ200)
£9.1250mm Low Level swivel castor (Black Painted Frame)... Read More. This High Load small and compact Low Level compact castor has an overall height of 71mm and a Black Nylon Wheel with Ball bearings. The Load Capacity is 200kg using manual propulsion at 4km/hKey Specifications:- Top Plate Size: 71x55mm
- Fixing Bolt Hole Centres: 53x36mm
- Fixing Bolt Hole size: 6mm
- Overall Height: 71mm
- Swivel Radius: 55mm
- Wheel Material: Black Nylon
- Bearing Type: Ball Bearings
- Tread width: 24mm
- Load Capacity: 200kg
- Out of Stock - On the Way
40mm Swivel Castor, 15kg Capacity | Polypropylene Wheel, Plain Bore (C041PLN)
£2.38A great value, general purpose, light duty cast... Read Moreor. This 40mm Top Plate Swivel Castor has a housing made from pressed steel and with four 38x38mm Fixing holes Hole Centres to accommodate 6mm bolts. The wheel is a Black Polypropylene Wheel with on a smooth Plain Bore and will not damage or mark concrete floors.
The load capacity of the castor is 15kg and the recommended load capacity over 4 castors is 45kg using manual propulsion at 4 km/h.
- In Stock
100mm Spring Loaded Gate Castor with non-marking wheel, 57kg Load Capacity (GCLD100)
Original price was: £13.09.£10.11Current price is: £10.11.Sale!Standard Gate Castor spring loaded for use on unev... Read Moreen surfaces. This gate castor comes with a swivel castor bracket with a 100mm non-marking wheel. It comes pre-drilled with two 10mm fixing holes spaced 60mm apart.Spring loaded gate castors help with opening and closing heavy gates (57kg) and because the spring allows the height to adjust with when it moves, it is suitable for use on uneven surfaces. The gate castor will help support the gate to help prevent it from dragging on the floor and hinge damage - In Stock
250mm Swivel Castor, 1100kg Capacity | Nylon Wheel, Ball bearing (HKS25025111)
£184.08250mm Top Plate Swivel Castor (Fabricated Steel)... Read More with a White Nylon Wheel and Ball Bearings. Load Capacity = 1,100kg using manual propulsion at 4km/h.Key Specifications:- Top Plate Dimensions: 149x110mm
- Fixing Bolt Hole Centres: 120x60mm (for 12mm Bolts) / 105x75/80mm (for 10mm Bolts)
- Fixing Bolt Hole Size: 13mm
- Overall Height: 303mm
- Castor Offset: 70mm
- In Stock
200mm Swivel Castor, 350kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSV200PN2B)
£36.66200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with ball bearing. Load Capacity = 350kg - In Stock
100mm Swivel Castor, 125kg Capacity | Polypropylene Wheel, Plain Bore (LSV100PP)
£6.61100mm Swivel Castor with a White Polypropylene Whe... Read Moreel fitted. It has 80x60mm fixing bolt hole centres and the load capacity of this castor is 125kg using manual propulsion at 4km/hThis is one of our most popular castors and the White Polypropylene wheel is non-marking and won't damage concrete floors. Because it is a hard tread it has the lowest rolling and swivelling resistance. It is ideal as a new component or a replacement caster for most general purpose domestic or industrial castor where the travel speed of the castor generally does not exceed walking speed. - Out of Stock - On the Way
60mm Low Level Swivel Castor, 200kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS060PTB200)
£54.6560mm Low Level Swivel Castor with 80x60mm Hole Cen... Read Moretres. Polyurethane Wheel with Ball bearing. Load Capacity = 200kg - Out of Stock - On the Way
150mm Stainless Steel Swivel Castor, 200kg Capacity | Nylon Wheel, Plain Bore (MSS150NYBH)
£36.23150mm Bolt Hole Swivel Castor (Stainless Steel Cas... Read Moretor) with 12mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 200kg - In Stock
150mm Swivel Castor, 370kg Capacity | Rubber Tyre Wheel, Roller Bearing (TSH150RU15)
£95.17150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80mm Fixing Bolt Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 370kgFeatures of the H Series Castor- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
125mm Black Swivel Castor, 220kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV125BRN2B)
Original price was: £21.60.£15.12Current price is: £15.12.Sale!125mm All Black Swivel Castor with Black Elastic R... Read Moreubber Tyre on a nylon centre wheel with a single ball bearing. This castor is designed for theatre applications to reduce reflection from lighting. It can also be used in any application where a pressed steel castor is required.The Swivel Brake Bracket has a 4 hole top plate with 80/77x60mm bolt hole spacing. The load capacity of this castor is 220kg using manual propulsion at 4km/h (walking speed)The Black Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is quiet and gentle on floors. The soft tread rubber (65 Shore A) absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products.DOWNLOAD CATALOGUE PAGE HERE - In Stock
200mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH200PN1B)
£31.14200mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Red Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 250kg
