Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock125mm Swivel Castor, 400kg Capacity | Polyurethane Tyre Wheel, Ball bearing, (HKS12520241)
£89.17125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball bearing. Load Capacity = 400kg- In Stock
125mm Swivel Castor, 100kg Capacity | Rubber Tyre Wheel, Ball Bearing (KAHS125TPR)
£12.15This apparatus /... Read More institutional castor comes with a 125mm Grey Thermoplastic Rubber Tyre Wheel on a nylon centre fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame) with a double ball race swivel head. The load capacity of this castor is 100kg using manual propulsion at 4km/hThis castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. The Ball Bearing in the wheel provides excellent rolling performance. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings - In Stock
80mm Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSZH080PN2B)
£9.2280mm Single Bolt Hole (12mm) Pressed Steel Swivel ... Read MoreCastor. This castor has Polyurethane Tyred wheel on a Nylon Centred with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. - In Stock
200mm Swivel Castor, 250kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSVH200PN1B)
£31.14200mm Single Bolt Hole (12mm) Swivel Castor (Press... Read Moreed Steel). Red Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 250kg - In Stock
50mm Swivel Castor, 55kg Capacity | Rubber Tyre Wheel, Plain Bore (2KS050TPRPL)
£10.1250mm Twin Wheel Top Plate Swivel Castor (Pressed S... Read Moreteel) with 46x46mm Fixing Holes. Grey Thermoplastic Rubber Tyre / Polypropylene Centre Wheel with Plain Bore. Load Capacity = 55kg - Out of Stock - On the Way
40mm Swivel Castor, 15kg Capacity | Rubber Tyre Wheel, Plain Bore (YS040RP15KP)
£2.2340mm Grey Rubber... Read More Tyre Wheel on a nylon centre fitted into a Top Plate Swivel Castor with 27x27mm bolt hole centres. The load capacity of this castor is 15kg using manual propulsion at 4km/hThis popular general, light duty purpose castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most domestic and industrial castor uses where a small yet sturdy castor in needed. - In Stock
75mm Black Footmaster Levelling Castor, Plate Fitting, 800kg Capacity | Nylon Wheel (KGD-100FBLACK)
£62.7575mm Foot Master Levelling Castor with an Black po... Read Morewder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres which is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 30mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load (GD-100-F-NYN-BLK)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
150mm Swivel Castor, 800kg Capacity | Nylon Wheel, Ball Bearing (TSH150NY2H)
£112.09150mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor) with 105x80 Hole Centres. White Nylon Wheel with Ball Bearings. Load Capacity = 800kgThe Bolt Holes of the H series castor are slotted to 120x60mm and 105x80/75mm.- Use 12mm diameter bolts when fitting at 120 x 60mm
- Use 10mm diameter bolts when fitting at 105x80/75mm
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- Power Towable to 6km/h.
- Out of Stock - On the Way
125mm Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (1321070)
£8.60125mm Bolt Hole Swivel Castor (Pressed Steel) with... Read More 10mm Bolt Hole. Nylon Wheel with Plain Bore. Load Capacity = 150kg - In Stock
100mm Stainless Steel Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (MSS100PNB)
£24.47100mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60mm Bolt Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 150kg - In Stock
100mm Stainless Steel Swivel Castor, 150kg Capacity | Nylon Wheel, Plain Bore (MSS100NY)
£17.71100mm Top Plate Swivel Castor (Stainless Steel Cas... Read Moretor) with 80x60mm Fixing Hole Centres. This castor has a White Nylon Wheel with a Smooth Plain Bore. The Load Capacity is 150kg using manual propulsion at 4km/m (walking Speed).Key Specifications- Top Plate Size: 100x85mm
- Bolt Hole Centres: 80x60mm
- Bolt Hole Size: 8.5x12mm (suits 8mm Fixing Bolts)
- Offset: 37mm
- Overall Height: 128mm
- Stainless Steel Grade: AISI 304
- In Stock
200mm Swivel Castor, 1000kg Capacity | Nylon Wheel, Ball bearing (HKS20020111)
£117.90200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Nylon Wheel with Ball bearing. Load Capacity = 1000kg - In Stock
50mm Low Level Swivel Castor, 160kg Capacity | Polyurethane Tyre Wheel, Plain Bore (2SL050PT0L)
£26.2150mm Low Level Twin Wheel Swivel Castor (REVVO Bra... Read Morend). The Polyurethane tyre wheels have a tread width of 14mm each and turn on a smooth Plain Bore. The Load Capacity of 160kg.This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.This castor has a round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes) - In Stock
200mm Swivel Castor, 200mm, 550kg Capacity, Nylon Wheel, Roller Bearing (BS5200NY1BA)
£95.09200mm Bolt Hole Swivel Castor (Fabricated Steel) w... Read Moreith 19.8mm Single Bolt Hole (to suit a 3/4" fixing Bolt). This extra heavy duty single bolt hole Castor has a solid white nylon with a needle roller bearing. The tread width of the wheel is 46mm and the Load Capacity is 550kg at 4km/h (walking speed) using manual propulsion.Key Specifications:- Ball Bearing Swivel Head
- Wheal Bearing Type: Roller Bearings
- Overall Height: 244mm
- Tread Width: 46mm
- Offset: 44.5mm
- Fixing Bolt Hole Size: 19.8mm
- Load Capacity: 550kg using manual propulsion at 4km/h (walking speed)
- Zinc Plated
- In Stock
75mm Swivel Castor, 70kg Capacity | Polypropylene Wheel, Plain Bore (LSV075PP)
£3.4175mm white polypropylene Wheel fitted into a Top P... Read Morelate Swivel Castor with 55x42mm bolt hole centres. The load capacity of this castor is 50kg using manual propulsion at 4km/hThis popular general purpose castor is fitted with a hard white polypropylene wheel that won't damage concrete floors. The hard tread lowers rolling and swivelling resistance making this castor easier to push compared to softer treads. This castor is ideal for most domestic or industrial castor uses where a small yet sturdy swivel castor in needed.
