Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock125mm Swivel Castor, 85kg Capacity | Rubber Tyre Wheel, Ball Bearing (1321053)
£9.98125mm Top Plate Swivel Castor (Pressed Steel) w... Read Moreith 80x60 Hole Centres. Grey Rubber Tyre / Nylon Centre Wheel with Ball Bearing. Load Capacity = 85kg
This is a 4 hole plate fitting castor and the bolt holes suit an 8mm bolt as well as being slotted (rather than round) to accommodate 80/76mm x 60x44.5mm.
- In Stock
50mm Black Footmaster Levelling Castor, Stem Fitting, 280kg Capacity | Nylon Wheel (KGD-60SBLACK)
£32.56M12 x 18mm Threaded Stem Levelling Castor with a 5... Read More0mm Black Nylon wheel and Black Powder Coating Finish (GD-60-S-NYN-BLK)Enhance your equipment's mobility and stability with our M12 x 18mm Threaded Stem Levelling Castor. This high-performance castor features a durable 50mm black Nylon wheel with a 25mm tread width and a robust Die Cast Aluminium foot pad. The foot pad is equipped with a vibration-damping rubber pad and a convenient Nylon hand-wheel for easy operation.Key Features:- Load Capacity: 280kg Static Load, 140kg Dynamic Load
- Versatile Functionality: Provides mobility, levelling, and anti-vibration functions
- Durable Construction: Black powder coating finish for long-lasting use
- Precise Levelling: Jacking castor design for smooth lifting and lowering
- In Stock
80mm Swivel Castor Threaded Stem, 90kg Capacity | Blue Rubber Tyre wheel, Plain Bore (K361RNST)
£10.8780mm Stem Fitting Swivel Castor w... Read Moreith M12x25mm Threaded Stem. Blue Rubber Tyre Wheel with a Nylon Centre and Plain Bore. The Load Capacity of this castor is 90kg at 4km/h using manual propulsion.This castor has a ball bearing swivel head and finished with a bright zinc plating.Key Specifications:- Threaded Stem Size: M12x25mm
- Overall Height: 95mm
- Wheel Material: Blue Elastic Rubber Tyre on a Black Nylon Centre
- Swivel Radius: 64.5mm
- In Stock
125mm Swivel Castor, 250kg Capacity | Nylon Wheel, Plain Bore (MSK125NY)
£13.64125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Nylon Wheel with a Smooth Plain Bore. Load Capacity = 250kg.This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications. The nylon wheel is insensitive to water and will not mark or damage most flooring. - In Stock
Swivel Castor (Twin Wheel), 250mm, 2800kg Capacity, Polyurethane Tyre Wheel, Ball Bearing (K2ST250PC2B)
£614.98250mm Twin Wheel Extra Heavy Duty Fabricated Swive... Read Morel Castor. The Swivel Head Turns On Thrust and Taper Roller Bearings For Extra Strength and The Bracket Is Finished In Black Epoxy Paint.This Castor Has A Top Plate Measuring 250mm X 250mm with Bolt Hole Spacings Of 190mm X 190mm Drilled To 19mm Diameter. The Two Polyurethane Tyre on a Cast Iron Centre Wheels Each Have Ball Bearings Fitted To Reduce The Rolling Resistance.The Castor Has A 2800kg Load Rating At 4Km/H - In Stock
150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (622RNB)
£40.29150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. The castor wheel has a blue elastic Rubber Tyre on a black Nylon Centre Wheel with a Roller Bearing. Load Capacity = 300kg using manual propulsion at 4km/h (walking speed)Blue elastic rubber castor wheels are widely used in industrial, commercial, and institutional settings due to their excellent performance characteristics. Here are the key features of a blue elastic rubber castor wheel:Features of a Blue Elastic Rubber Castor Wheel- High Elasticity and Shock Absorption: These wheels absorb shocks and vibrations effectively.
- Floor Protection: The soft, non-marking rubber protects floors from scratches and scuffs, making them perfect for indoor use on tiles, wood, and other surfaces.
- Quiet Operation: The elastic rubber compound reduces noise during movement, making these wheels suitable for environments where quiet operation is important, such as hospitals, schools, and offices.
- Excellent Traction and Grip: Provides superior grip on a variety of surfaces, reducing slippage and enhancing safety in wet or slick environments.
- Resistance to Wear and Tear: The rubber is highly durable and resists abrasion, ensuring a long service life even in demanding conditions.
- Smooth Rolling Performance
- In Stock
125mm Swivel Castor, 160kg Capacity | Polypropylene Wheel, Plain Bore (LSV125PP)
£8.21125mm top Plate Swivel Castor with a White Polypro... Read Morepylene wheel. It has 80x60mm bolt hole centres and a load capacity of 160kg using manual propulsion at 4km/hThis is one of our most popular castors and the White Polypropylene wheel is non-marking and won’t damage concrete floors. Because it is a hard tread it has the lowest rolling and swivelling resistance. It is ideal as a new component or a replacement caster for most general purpose domestic or industrial castor where the travel speed of the castor generally does not exceed walking speed. - In Stock
150mm Swivel Castor, 500kg | Polyurethane Tyre Wheel, Roller Bearing (622PNB)
£38.51150mm Top Plate Swivel Castor (Flexello) with 105X... Read More80mm Fixing Bolt Hole Centres and a 188mm Overall Height. The Castor Wheel has a Red Polyurethane Tyre on a White Nylon Centre Wheel With a 45mm Tread Width and a needle Roller Bearing. Load Capacity = 500Kg using manual propulsion at 4km/h. - In Stock
50mm Swivel Castor, 55kg Capacity | Polypropylene Wheel, Plain Bore (LSV050PPBH)
£2.33This castor c... Read Moreomes with a 50mm White Polypropylene Wheel fitted into a 10mm Single Bolt Hole Swivel Castor (Pressed Steel Frame). The load capacity of this castor is 55kg using manual propulsion at 4km/h.
This castor is fitted with a white polypropylene wheel that that will not damage or mark the floor and is ideal for most general, light duty castor purposes such as trolley castors or dolly castors. Single Bolt Hole castors can have a expander tube fitting (purchased separately) attached to insert into hollow square or round tubing. See our section on Expander Tube Fittings
- In Stock
125mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK125PC2B)
£64.00125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres. Polyurethane Tyre on a Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 300kg.This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications. - Out of Stock - On the Way
40mm Swivel Castor, 15kg Capacity | Rubber Tyre Wheel, Plain Bore (YS040RP15KP)
£2.2340mm Grey Rubber... Read More Tyre Wheel on a nylon centre fitted into a Top Plate Swivel Castor with 27x27mm bolt hole centres. The load capacity of this castor is 15kg using manual propulsion at 4km/hThis popular general, light duty purpose castor is fitted with a grey rubber tyre that will not mark or damage the floor and is ideal for most domestic and industrial castor uses where a small yet sturdy castor in needed. - In Stock
125mm Swivel Castor, 150kg Capacity | Rubber Tyre Wheel, Single Ball Bearing (MSVH125RN2B)
£16.51125mm Single Bolt Hole (12mm) Pressed Steel Swivel... Read More Castor. This castor has an Elastic Blue Rubber Tyred Wheel on a Nylon Centred Wheel with a Single Ball Bearing. The Load Capacity is 150kg using manual propulsion at 4km/h. - In Stock
160mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Roller Bearing (LSV160RMB)
£13.52160mm Top Plate Swivel Castor with a Black Rubber ... Read MoreTyre Wheel on a Pressed Steel centre complete with Thread Guards. It has 105x80mm bolt hole centres and a load capacity of 160kg using manual propulsion at 4km/h.This popular general purpose castor is fitted with a Black Rubber Tyre Wheel that is gentle on floors. The Caster wheel has a roller bearing that offers low rolling resistance. It is ideal as a new or replacement castor for most domestic or industrial applications such as a trolley or dolly where the travel speed of the castor generally does not exceed walking speed. - Out of Stock - On the Way
200mm Swivel Castor, 1500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (2SH200PT15)
£307.52200mm Heavy Duty Top Plate Swivel Castor (Fabricat... Read Moreed Castor - Twin Wheel) with 105x80 Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 1500kg - In Stock
150mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (BS5150PC2BA)
£112.08150mm Bolt Hole Swivel Castor (Fabricated Steel) w... Read Moreith 19.8mm Single Bolt Hole (to suit a 3/4" fixing Bolt). This is an extra heavy duty single bolt hole castor and the wheel has a Polyurethane Tyre wheel on a Cast Iron Centre with 50mm Tread width and Ball Bearing fitted. The Load Capacity is 600kg at 4km/h (walking speed) using manual propulsion.Key Specifications:- Ball Bearing Swivel Head
- Wheel Bearing Type: Ball Bearing
- Overall Height: 200mm
- Tread Width: 50mm
- Offset: 44.5mm
- Fixing Bolt Hole Size: 19.8mm
- Zinc Plated
- Load Capacity: 600kg using manual propulsion at km/h (walking speed)
