Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock100mm LAG Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (23603)
£48.38100mm Top Plate Swivel Castor (LAG Pressed Steel) ... Read Morewith a Top Plate measuring 105x80mm and 80x60mm Fixing Bolt Hole Centres. This caster has an overall height of 137mm and an offset of 37mm. The wheel is a quality Polyurethane Tyre on Cast Iron Centre Wheel with a 30mm Tread Width and Ball Bearings. Load Capacity = 300kg- In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Ball Bearing (MSK200PN2B)
£48.52200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80mm Fixing Bolt Hole Centres. Polyurethane Tyre on a Nylon Centre Wheel with Ball Bearings. Load Capacity = 500kg. - In Stock
150mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Roller Bearing (661RNB)
£48.60150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Rubber Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 300kg - In Stock
60mm Twin Wheel Swivel Castor | Polyurethane Tyre Wheel, Ball Bearing, 150kg Capacity (GAJSD60ASFHUD)
Original price was: £51.19.£49.66Current price is: £49.66.Sale!60mm Swivel Castor with Dual Polyurethane ... Read MoreTyres for AGVsMaximize your AGV’s performance with our high-quality Automated Guided Vehicle Castors. This 70mm swivel castor features dual (twin) polyurethane tyres mounted on durable aluminium centres, complemented by precision ball bearings. Designed to meet the high demands of AGV applications, this castor ensures smooth, efficient, and reliable operation in industrial settings.The black powder-coated bracket offers superior protection compared to standard zinc-plated frames, enhancing durability in harsh environments. Its low overall height of just 87mm makes it ideal for compact AGV systems, ensuring stability without compromising load capacity—supporting up to 150kg (450kg over 4 castors).Key Specifications:
- Top Plate Fixing: 86x61mm bolt hole spacing with 9mm drilled holes, suited for 8mm bolts.
- Dual Polyurethane Tyres: 95 Shore A hardness for low tractive resistance, smooth and quiet operation.
- Non-Marking Tyres: Protects floors and reduces maintenance costs.
- Robust Swivel Bracket: Double ball race swivel head for enhanced manoeuvrability and durability.
Benefits:
- Optimized for AGVs: Engineered for automated guided vehicles, ensuring reliable, continuous performance.
- Smooth, Quiet Operation: Polyurethane tyres reduce rolling resistance and noise, enhancing efficiency.
- Long-Lasting Durability: Strong aluminium centres and black powder-coated brackets for extended lifespan.
- In Stock
150mm Swivel Castor, 600kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (661PNB)
£49.78150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 600kg - In Stock
125mm Swivel Castor, 400kg Capacity | Polyurethane Tyre Wheel, Ball Bearing, (KSMG125PCB)
£50.53125mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Bolt Hole Centres. Polyurethane Tyre / Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 400kgKey Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 165mm
- Offset: 39mm
- Tread Hardness: 92 +/-3 Shore A
- Bearing Type: Ball Bearing
- Load Capacity: 400kg (manual propulsion at 4km/h)
- Polyurethane tyre castor wheels offer high load capacity and exceptional wear resistance—lasting up to 10 times longer than rubber wheels under similar conditions. With a soft tread that’s softer than concrete, they won’t damage floors and operate with minimal noise. Resistant to oils, greases, petrol, and a wide range of chemicals, they’re ideal for demanding environments.
- In Stock
160mm Swivel Castor, 300kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG160EAB)
£50.90160mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Black Rubber Tyre / Aluminium Centre Wheel with Ball Bearing. Load Capacity = 300kg - In Stock
75mm Footmaster Castor with Levelling Foot, 700kg Capacity | Nylon Wheel, Ball bearing (KGDL75ASFNYD)
Original price was: £85.44.£51.03Current price is: £51.03.Sale!This 75mm Heavy Duty Levelling Castor with a Black... Read More Nylon wheel (Ball Bearing) and adjustable foot (GDL-75-ASF-NYD). This castor is a swivel castor with a load capacity of 700kg. The aluminium castor frame has a durable ivory coloured powder coating for protection against wear and tear.The overall height of the castor is 110mm and the adjustable foot can extend by up to 18mm to enable precise levelling.The load capacity of this product is 700kg and the recommended maximum total load over 4 castors is 2,100kg. - In Stock
63mm Footmaster Levelling Castor, Plate Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80F)
£51.3663mm Foot Master Levelling Castor with an Ivory Co... Read Morelour powder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 28mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load (GD-80-F-NYN)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
63mm Black Footmaster Levelling Castor, Plate Fitting, 550kg Capacity | 63mm Nylon Wheel (KGD-80FBLACK)
£51.3663mm Foot Master Levelling Castor with an Black po... Read Morewder coating finish. This product has a 4-hole top plate with 70mm x 70mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 28mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 550kg Static Load and 275kg Dynamic Load (GD-80-F-NYN-BLK)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
200mm Swivel Castor, 550kg Capacity | Nylon Wheel, Ball Bearing (KS200NYB550)
£51.56200mm Top Plate Swivel Castor (Industrial Castor) ... Read Morewith 105x80 Hole Centres. Nylon Wheel with Ball Bearing. Load Capacity = 550kg - In Stock
200mm Swivel Castor, 500kg Capacity | Nylon Wheel, Roller Bearing (822NYB)
£51.97200mm Flexello Top Plate Swivel Castor (Pressed St... Read Moreeel) With 105X80mm Bolt Hole Centres. White Nylon Wheel With Roller Bearing. Load Capacity = 500Kg - In Stock
75mm Footmaster Levelling Castor, Stem Fitting, 800kg Capacity | Nylon Wheel (KGD-100S)
£52.1675mm Foot Master Levelling Castor with M16 x 24mm ... Read MoreThreaded Stem Fitting finished in an ivory coloured powder coating finish. This product has a black Nylon Wheel with a 30mm Tread width, Die Cast Aluminium Foot Pad with a vibration damping rubber pad. This foot pad has a Nylon Hand-wheel operation.This product's load capacity has increased to 800kg Static Load and 400kg Dynamic Load (GD-100-S-NYN)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
150mm Swivel Castor, 400kg Capacity | Rubber Tyre Wheel, Ball Bearing (KSMG150RUB)
£52.33150mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80mm Fixing Bolt Hole Centres. Black Rubber Tyre on a Cast Iron Centre Wheel with Ball Bearings. Load Capacity = 400kgKey Specifications:- Top Plate Size: 140mm x 110mm
- Bolt Hole Centres: Slotted to 114x87mm / 97.5x71.5mm
- Overall Height: 190mm
- Tread Width: 45mm
- Castor Offset: 40mm
- In Stock
70mm Twin Wheel Swivel Castor | Polyurethane Tyre Wheel, Ball Bearing, 200kg Capacity (GAJSD70ASFHUD)
Original price was: £54.15.£52.53Current price is: £52.53.Sale!70mm Swivel Castor with Dual Polyurethane ... Read MoreTyres for AGVsMaximize your AGV’s performance with our high-quality Automated Guided Vehicle Castors. This 70mm swivel castor features dual (twin) polyurethane tyres mounted on durable aluminium centres, complemented by precision ball bearings. Designed to meet the high demands of AGV applications, this castor ensures smooth, efficient, and reliable operation in industrial settings.The black powder-coated bracket offers superior protection compared to standard zinc-plated frames, enhancing durability in harsh environments. Its low overall height of just 97mm makes it ideal for compact AGV systems, ensuring stability without compromising load capacity—supporting up to 200kg per castor (600kg over 4 castors).Key Specifications:
- Top Plate Fixing: 86x61mm bolt hole spacing with 9mm drilled holes, suited for 8mm bolts.
- Dual Polyurethane Tyres: 95 Shore A hardness for low tractive resistance, smooth and quiet operation.
- Non-Marking Tyres: Protects floors and reduces maintenance costs.
- Robust Swivel Bracket: Double ball race swivel head for enhanced manoeuvrability and durability.
Benefits:
- Optimized for AGVs: Engineered for automated guided vehicles, ensuring reliable, continuous performance.
- Smooth, Quiet Operation: Polyurethane tyres reduce rolling resistance and noise, enhancing efficiency.
- Long-Lasting Durability: Strong aluminium centres and black powder-coated brackets for extended lifespan.
