Swivel Castors
Swivel Castors and wheels can swivel 360 degrees about the vertical axis (see figure below). They consist of a housing and a caster wheel. The housing itself is made up of a plate fitting, swivel bearings and a yoke. The Yoke is often referred to as the castor's frame (see figure below).The plate fitting determines how the... castor is going to be attached to the equipment. It is usually either a single bolt hole fitting or a plate fixing which is generally square, rectangular or triangular. Plate fittings are usually bolted to equipment so knowing your required bolt hole centres is important. The Swivel Head consists of a ball race and a number of ball bearings that roll within it. Swivel Castors can either have a single ball race or a double ball race. They perform the same function. The double ball race was developed for medium and heavy applications. This is because they are compact, perform well under static and dynamic loads and provide excellent steerability.
Swivel castors can be fitting with locks which lock (brake) wither the wheel or the swivel head or both. See Brake Castors.
Swivel Castor Components
Swivel Castor Offset
The Swivel Castor's offset it the distance from the swivel axis to the centre of the wheel (where it is secured to the castor frame). It is the reason a swivel castor will go in the direction you want it to go regardless its starting direction. The offset and castor wheel's diameter make up the swivel radius where the swivel radius = Offset + (Wheel Diameter / 2).
This is the radius of circle described but the outer dimension of the wheel swivelling around the vertical axis. Basically, this is important because it tells you how much room is needed for the swivel caster to swivel. Furthermore, the general rule is the bigger the offset the better the castor's running performance but the lower the weight it can carry. Read More
- Display 15 Products per page
In Stock200mm Swivel Castor, 600kg Capacity | Cast Iron Wheel, Ball Bearing (KSMG200CIB)
£57.34200mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith 105x80 Hole Centres. Cast Iron Wheel with Ball Bearing. Load Capacity = 600kg- In Stock
42mm Footmaster Levelling Castor, Plate Fitting, 60kg Capacity | 42mm Nylon Wheel (KGD-40F)
Original price was: £21.82.£19.32Current price is: £19.32.Sale!42mm Foot Master Levelling Castor with an ivory co... Read Moreloured powder coating finish. This product has a 4-hole top plate with 42mm x 42mm bolt hole centres and is also powder coated for added protection. The wheel is made from premium quality black Nylon with a 20mm Tread width and the Die Cast Aluminium Foot Pad has a rubber vibration damping pad. This foot pad has a Nylon Hand-wheel operationThis product's load capacity has increased to 60kg Static Load and 30kg Dynamic Load (GD-40-F-NYN)Because of the lifting and lowering function of the Foot Master castor, like all Jacking Castors, it is important understand that each castor may be subjected to HALF THE TOTAL WEIGHT. Therefore, the recommended load capacity for each Foot Master Levelling Castor is half the castor's Static Load Capacity, that is, when the castors' levelling function is not being used. The load capacity of the Footmaster Castor when it is being moved and positioned is given by the Dynamic Load Capacity.This levelling castor is a multi-functional swivel castor that provides mobility, levelling and anti-vibration functions. This allows users to move and position large equipment into place with added stability using the levelling and anti-vibration features. - In Stock
200mm Swivel Castor, 500kg Capacity | Polyurethane Tyre Wheel, Roller Bearing (822PNB)
£59.07200mm Top Plate Swivel Castor (Pressed Steel) with... Read More 105x80 Hole Centres. Polyurethane Tyre / Nylon Centre Wheel with Roller Bearing. Load Capacity = 500kg - In Stock
100mm Swivel Castor, 300kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KB100NPSBJ300)
£46.95100mm Top Plate Swivel Castor (Pressed Steel) with... Read More brake. 80x60 Hole Centres. Soft Polyurethane Tyre (Shore A 80) / Nylon Centre. Load Capacity = 300kg - In Stock
100mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Ball Bearing (MSV100RN2B)
£10.50100mm Swivel Castor bracket (Pressed Steel) fitted... Read More with a Blue Elastic Rubber Tyre on a nylon centre wheel with a ball bearing. The Swivel Bracket has a 4 hole top plate with 80x60mm bolt hole spacing. The load capacity of this castor is 160kg using manual propulsion at 4km/h (walking speed)The Blue Elastic Rubber Tyre offers a higher load capacity than standard grey or black rubber tyres and is non-marking, gentle on floors and the rubber absorbs vibrations whilst in motion making this a low noise option. The ball bearing lowers the rolling resistance to reduce the effort required to move the castors. Together with the strong bracket that has a double ball race in the swivel head makes this castors a great performer and one of our most popular products.This castor is often used on flight cases as well as in many medical, industrial and domestic applications. - In Stock
Swivel Castor, 1000kg Capacity | 150mm Polyurethane Tyre Wheel, Ball bearing, (K2ST150PC2B)
£301.24150mm Twin Wheel Extra Heavy Duty Fabricated Sw... Read Moreivel Castor. The swivel head turns on thrust and taper roller bearings for extra strength and the bracket is finished in black epoxy paint.
This castor has a top plate measuring 170mm x 170mm with bolt hole spacings of 130mm x 130mm drilled to 13mm diameter. The two Polyurethane Tyre on a Cast Iron Centre wheels each have ball bearings fitted to reduce the rolling resistance.
The castor has a 1000kg Load Rating at 4km/h
- In Stock
125mm Swivel Castor, 170kg Capacity | Rubber Tyre Wheel, Roller Bearing (TSH125RU1H)
£100.57125mm Heavy Duty Top Plate Swivel Castor (Fabri... Read Morecated Castor) with 105x80 Hole Centres. Rubber Tyre / Cast Iron Centre Wheel with Roller Bearing. Load Capacity = 170kg
Features of the H Series Castor
- The Genuine Revvo H Series castor is made from heavy gauge forged steel with a hardened ball race in the swivel race that serve as both thrust and radial bearings.
- The swivel head comes with a metal swivel seal and hydraulic grease nipple
- The closed base of the swivel ring prevents downward escape of lubricant
- The side plates are press formed to a cylindrical shape to give the best strength to weight ratio
- A four way direction lock can be purchased and fitted to the castor 9999-0181
- In Stock
160mm Swivel Castor, 160kg Capacity | Rubber Tyre Wheel, Plain Bore (LSV160RP)
£19.76160mm Top Plate Swivel Castor with a Grey Rubber T... Read Moreyre wheel on a Nylon Center. It as 105x80mm fixing bolt hole centres and a Load Capacity of 135kg using manual propulsion at 4km/h.This popular general purpose castor is fitted with a Grey rubber tyre that is both non-marking and gentle on floors. The wheel has a roller bearing that lower the rolling resistance. It makes a great new component to make your equipment mobile or as a replacement castor. It is ideal for most general purpose domestic or industrial applications such as a trolley, dolly or furniture where the travel speed of the castor generally does not exceed walking speed. - In Stock
150mm Swivel Castor, 520kg Capacity | Nylon Wheel, Plain Bore (661NY)
£35.65150mm Top Plate Swivel Castor (Pressed Steel) with... Read More 140x105mm Bolt Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 520kg - In Stock
50mm Swivel Castor, 54kg Capacity | Nylon Wheel, Plain Bore (961NY)
£3.5850mm Top Plate Swivel Castor (Pressed Steel) with ... Read More54x25mm Hole Centres. Nylon Wheel with Plain Bore. Load Capacity = 54kg - In Stock
50mm Compact Swivel Castor, 150kg Capacity | Polyurethane Tyre Wheel, Ball bearing (KS050PT2BBH)
£14.5950mm Low Level swivel castor with 12mm Single Bolt... Read More Hole Fixing. This Low Level compact castor has an overall height of 70mm and an Orange Polyurethane Wheel on a steel centre with a 33mm Tread Width and Ball bearings. Load Capacity = 150kg - In Stock
50mm Low Level Swivel Castor, 160kg Capacity | Polyurethane Tyre Wheel, Plain Bore (MSTW050PT)
Original price was: £21.36.£14.95Current price is: £14.95.Sale!50mm Low Level Twin Wheel Swivel Castor (Keystone)... Read More with a round top plate. The Polyurethane tyre wheels have a tread width of 14mm each and turn on a smooth Plain Bore. The Load Capacity of 160kg.This castors offers an exceptional load capacity in relation to their low overall working height and is ideal for heavy equipment being used on smooth, hard flooring. The differential action from the twin wheels makes for smooth operation.The round top plate with a diameter of 95mm and 4 fixing holes to suit a 6mm bolt. Each fixing hole is spaced 51mm from the directly opposite fixing hole (the largest distance between the fixing holes) - In Stock
100mm Swivel Castor, 270kg Capacity | Nylon Wheel, Ball Bearing (KSMG100NYB)
£33.02100mm Top Plate Swivel Castor (Fabricated Steel) w... Read Moreith a 4 hole top plate fitting and 105x80mm Bolt Hole Centres. This castor houses a Nylon Wheel with Ball Bearing. Load Capacity = 270kg using manual propulsion at 4km/h (walking speed),Key Specifications and Features:- Top Plate Size: 140x110mm
- Bolt Hole Centres: Slotted 114x87mm / 97.5x71.5mm
- Fixing Bolt Size: 12mm
- Overall Height: 143mm
- Offset: 35mm
- Bearing Type: Ball Bearing
- Load Capacity: 270kg (manual propulsion at 4km/h)
- Nylon castor wheels have a high load capacity at a low cost. They are maintenance free and extremely resistant to water, salts, greases, acids and alkalis
- In Stock
50mm Swivel Castor, 27kg Capacity | Rubber Tyre Wheel, Plain Bore (961RN)
£5.2850mm Top Plate Swivel Castor (Pressed Steel) with ... Read More54x25mm Fixing Bolt Hole Centres and 64mm Overall Height. The wheel is a Blue Rubber Tyre on a Black Nylon Centre Wheel with a Smooth Plain Bore and a 22mm Tread Width. Load Capacity = 27kg.The blue rubber tyre wheel has a soft tread and is both gentle on floors and non-marking. It also absorbs fine vibrations whilst moving which provides user comfort and limits noise. - In Stock
125mm Swivel Castor, 300kg Capacity | Nylon Wheel, Ball Bearing (MSK125NY2B)
£22.36125mm Top Plate Swivel Castor (Pressed Steel) with... Read More 80x60mm Fixing Bolt Hole Centres and 157mm Overall Height. Nylon Wheel with Ball Bearings. Load Capacity = 300kg.This castor is made from heavy gauge pressed steel with a 5mm thick Top Plate and 4mm Castor Forks. It is a product that is built to last and is great for arduous applications. The nylon wheel is insensitive to water and will not mark or damage most flooring.
